Specification sheetIssued 20 November 2026
John Deere · wheel loader
John Deere 544
John Deere 544 P-Tier (maker spec sheet MW544PAU 22-01; successor to the 544L), standard Z-Bar linkage, 2.3 m³ general-purpose pin-on bucket with bolt-on edge, 20.5 R 25 tyres, PowerTech PVS 6068 (Final Tier 4 / Stage V). High-Lift and High-Lift Plus linkages, coupler buckets and forks are in the same sheet and are not covered here.
USAGlobal
- Bucket capacity
- 3.0 cu yd
- power
- 166 hp
- Operating weight
- 30,520 lb
- Static tipping load (full turn)
- 19,544 lb
10.9 ft9.6 ft24.6 ft
8.4 ftDimensions
- Tread width (Michelin 20.5 R 25 L-3 XHA2)
- 76.8"
- Width over tyres
- 100.2"
- Bucket width
- 8'4"
- Turning radius (outside of tyre) (Measured to centreline of outside tyre)
- 16'5"
- Clearance circle (bucket) (Bucket in carry position)
- 37'7"
Weight
- Operating weight (Z-Bar, 2.3 m³ GP pin-on bucket, ROPS cab, counterweight, guards, full fuel tank and 79 kg operator)
- 30,520 lb
- Bucket weight (2.3 m³ GP bucket with bolt-on cutting edge)
- 2,415 lb
Engine
- Engine model
- John Deere PowerTech PVS 6068
- Emissions
- EPA Final Tier 4 / EU Stage V
- Cylinders
- 6, 4 valves per cylinder, turbocharged and charge-air cooled
- Displacement
- 414 cu in.
- Gross power (ISO 9249, gross peak, at 1,700 rpm)
- 174 hp
- Net power (ISO 9249, net peak, at 1,700 rpm. No derating up to 3,050 m altitude (p.11))
- 166 hp
- Max torque (ISO 9249 gross peak, at 1,600 rpm)
- 568 lb-ft
- Net peak torque (ISO 9249, at 1,100 rpm)
- 546 lb-ft
- Net torque rise
- 47%
- Fuel system
- Electronically controlled high-pressure common rail
- Cooling fan drive
- Hydraulically driven, proportionally controlled, fan aft of coolers (Quad-Cool package)
- Electrical system
- 24 V, 100 A alternator (130 A optional), 2 x 12 V batteries, 950 CCA each
Performance
- Bucket capacity (Heaped; struck 1.9 m³)
- 3.0 cu yd
- Bucket capacity range
- Pin-on 2.1-2.5 m³; coupler 1.9-4.0 m³
- Rated operating capacity (ISO 14397-1, 50% of full-turn tipping load, with tyre deflection (4,827 kg without))
- 9,772 lb
- Static tipping load (straight) (With tyre deflection (11,139 kg without))
- 23,221 lb
- Static tipping load (full turn) (40 deg full turn, with tyre deflection (9,653 kg without))
- 19,544 lb
- Breakout force (Maker lists 13 166 kg)
- 29,026 lb
- Top speed (5th gear forward, lockup converter, 20.5 R 25 tyres)
- 24.8 mph
- Hydraulic raise time
- 5.5 s
- Hydraulic dump time
- 2.2 s
- Hydraulic lower time (power down)
- 3.5 s
- Hydraulic total cycle time
- 11.2 s
Transmission
- Transmission
- Countershaft-type PowerShift, 5 speeds with lockup torque converter (5-speed without lockup optional)
- Torque converter
- Single stage, single phase
- Shift control
- Electronically modulated, adaptive, load and speed dependent; manual/auto; 4 clutch cutoff settings
- Forward 1 (Lockup converter, 20.5 R 25 tyres)
- 3.7 mph
- Forward 2
- 7.4 mph
- Forward 3
- 11.5 mph
- Forward 4
- 17.3 mph
- Forward 5
- 24.8 mph
- Reverse 1 (Lockup converter, 20.5 R 25 tyres)
- 3.6 mph
- Reverse 2
- 7.8 mph
- Reverse 3
- 18.3 mph
Axles and brakes
- Final drives
- Heavy-duty inboard-mounted planetary
- Differentials
- Hydraulic locking front with conventional rear (standard); dual locking front and rear (optional)
- Rear axle oscillation (Stop to stop, 12 deg each direction, with 20.5 R 25 tyres)
- 24°
- Service brakes
- Hydraulically actuated, spring-retracted, self-adjusting, inboard sun-shaft mounted, oil cooled, single disc (ISO 3450)
- Parking brake
- Automatic spring applied, hydraulically released, driveline mounted, sealed wet multi-disc
Hydraulics
- Pump type
- Variable-displacement axial piston, closed-centre, pressure-compensating (loader and steering)
- Pump flow (At 6,895 kPa (1,000 psi) and 2,200 rpm)
- 58 gpm
- Max pressure (System relief pressure, loader and steering (25 166 kPa))
- 3,650 psi
- Loader controls
- 2-function valve, joystick or fingertip controls; optional 3rd and 4th function valve with auxiliary lever
- Steering type
- Fully hydraulic power steering (ISO 5010)
- Articulation angle (80 deg arc, 40 deg each direction)
- 80°
Tyres
- Tyres (Standard; other 20.5-25, 620/75R26 and 750/65R26 options are listed on p.9 of the sheet)
- 20.5 R 25 Michelin 1 Star L-3 XHA2
Service capacities
- Fuel tank
- 79 gal
- Cooling system
- 31.6 qt
- Diesel exhaust fluid (DEF) tank
- 16.5 qt
- Engine oil (With vertical spin-on filter)
- 20.6 qt
- Transmission (Reservoir with vertical filter)
- 22.2 qt
- Axle oil, front
- 17.5 qt
- Axle oil, rear
- 19 qt
- Hydraulic tank (Reservoir and filter)
- 21.7 gal
- Park brake oil (wet disc)
- 10 oz