John Deere 544
Show imperial
EquipmentsFinder

Specification sheetIssued 20 November 2026

John Deere · wheel loader

John Deere 544

John Deere 544 P-Tier (maker spec sheet MW544PAU 22-01; successor to the 544L), standard Z-Bar linkage, 2.3 m³ general-purpose pin-on bucket with bolt-on edge, 20.5 R 25 tyres, PowerTech PVS 6068 (Final Tier 4 / Stage V). High-Lift and High-Lift Plus linkages, coupler buckets and forks are in the same sheet and are not covered here.

USAGlobal

Bucket capacity
2.3 m³
power
123 kW (166 hp)
Operating weight
13,844 kg
Static tipping load (full turn)
8,865 kg
John Deere 544, side view with dimensions (illustration)3.33 m2.93 m7.49 m
John Deere 544, front view (illustration)2.55 m

Dimensions

Tread width (Michelin 20.5 R 25 L-3 XHA2)
1.95 m
Width over tyres
2.546 m
Bucket width
2.54 m
Turning radius (outside of tyre) (Measured to centreline of outside tyre)
5 m
Clearance circle (bucket) (Bucket in carry position)
11.46 m

Weight

Operating weight (Z-Bar, 2.3 m³ GP pin-on bucket, ROPS cab, counterweight, guards, full fuel tank and 79 kg operator)
13,844 kg
Bucket weight (2.3 m³ GP bucket with bolt-on cutting edge)
1,095 kg

Engine

Engine model
John Deere PowerTech PVS 6068
Emissions
EPA Final Tier 4 / EU Stage V
Cylinders
6, 4 valves per cylinder, turbocharged and charge-air cooled
Displacement
6.8 L
Gross power (ISO 9249, gross peak, at 1,700 rpm)
130 kW (174 hp)
Net power (ISO 9249, net peak, at 1,700 rpm. No derating up to 3,050 m altitude (p.11))
123 kW (166 hp)
Max torque (ISO 9249 gross peak, at 1,600 rpm)
770 Nm
Net peak torque (ISO 9249, at 1,100 rpm)
740 Nm
Net torque rise
47%
Fuel system
Electronically controlled high-pressure common rail
Cooling fan drive
Hydraulically driven, proportionally controlled, fan aft of coolers (Quad-Cool package)
Electrical system
24 V, 100 A alternator (130 A optional), 2 x 12 V batteries, 950 CCA each

Performance

Bucket capacity (Heaped; struck 1.9 m³)
2.3 m³
Bucket capacity range
Pin-on 2.1-2.5 m³; coupler 1.9-4.0 m³
Rated operating capacity (ISO 14397-1, 50% of full-turn tipping load, with tyre deflection (4,827 kg without))
4,433 kg
Static tipping load (straight) (With tyre deflection (11,139 kg without))
10,533 kg
Static tipping load (full turn) (40 deg full turn, with tyre deflection (9,653 kg without))
8,865 kg
Breakout force (Maker lists 13 166 kg)
129 kN
Top speed (5th gear forward, lockup converter, 20.5 R 25 tyres)
40 km/h
Hydraulic raise time
5.5 s
Hydraulic dump time
2.2 s
Hydraulic lower time (power down)
3.5 s
Hydraulic total cycle time
11.2 s

Transmission

Transmission
Countershaft-type PowerShift, 5 speeds with lockup torque converter (5-speed without lockup optional)
Torque converter
Single stage, single phase
Shift control
Electronically modulated, adaptive, load and speed dependent; manual/auto; 4 clutch cutoff settings
Forward 1 (Lockup converter, 20.5 R 25 tyres)
6.1 km/h
Forward 2
12 km/h
Forward 3
18.6 km/h
Forward 4
27.9 km/h
Forward 5
40 km/h
Reverse 1 (Lockup converter, 20.5 R 25 tyres)
5.9 km/h
Reverse 2
12.7 km/h
Reverse 3
29.4 km/h

Axles and brakes

Final drives
Heavy-duty inboard-mounted planetary
Differentials
Hydraulic locking front with conventional rear (standard); dual locking front and rear (optional)
Rear axle oscillation (Stop to stop, 12 deg each direction, with 20.5 R 25 tyres)
24°
Service brakes
Hydraulically actuated, spring-retracted, self-adjusting, inboard sun-shaft mounted, oil cooled, single disc (ISO 3450)
Parking brake
Automatic spring applied, hydraulically released, driveline mounted, sealed wet multi-disc

Hydraulics

Pump type
Variable-displacement axial piston, closed-centre, pressure-compensating (loader and steering)
Pump flow (At 6,895 kPa (1,000 psi) and 2,200 rpm)
220 L/min
Max pressure (System relief pressure, loader and steering (25 166 kPa))
252 bar
Loader controls
2-function valve, joystick or fingertip controls; optional 3rd and 4th function valve with auxiliary lever
Steering type
Fully hydraulic power steering (ISO 5010)
Articulation angle (80 deg arc, 40 deg each direction)
80°

Tyres

Tyres (Standard; other 20.5-25, 620/75R26 and 750/65R26 options are listed on p.9 of the sheet)
20.5 R 25 Michelin 1 Star L-3 XHA2

Service capacities

Fuel tank
298 L
Cooling system
29.9 L
Diesel exhaust fluid (DEF) tank
15.6 L
Engine oil (With vertical spin-on filter)
19.5 L
Transmission (Reservoir with vertical filter)
21 L
Axle oil, front
16.6 L
Axle oil, rear
18 L
Hydraulic tank (Reservoir and filter)
82.1 L
Park brake oil (wet disc)
0.3 L