John Deere 350 P-Tier
Show metric
EquipmentsFinder

Specification sheetIssued 20 November 2026

John Deere · excavator

John Deere 350 P-Tier

John Deere 350 P-Tier (the 35 t excavator that replaced the 350G LC), figures from Deere's 350 P-Tier spec sheet ME350PAU for the 6.4 m one-piece boom, 4.0 m arm, 1.76 m3 heavy-duty bucket, 800 mm triple semi-grouser shoes and standard 6,928 kg counterweight. Engine is the Final Tier 4 / Stage IV PowerTech PSS 9.0 L.

UAEGlobal

digging depth
26' 10"
power
271 hp
Operating weight
80,985 lb
Bucket capacity
2.3 yd3
John Deere 350 P-Tier, side view with dimensions (illustration)10.3 ft13.3 ft37 ft
John Deere 350 P-Tier, front view (illustration)11.1 ft

Working range

AMax digging reach (6.4 m boom, 4.0 m arm; 11.10 m with the 3.2 m arm)
38' 11"
A'Max reach at ground level (10.89 m with the 3.2 m arm)
38' 3"
BMax digging depth (7.38 m with the 3.2 m arm)
26' 10"
B'Max digging depth (8' level) (2.44 m flat bottom; 7.21 m with the 3.2 m arm)
26' 5"
CMax digging height (Printed as maximum cutting height; 10.36 m with the 3.2 m arm)
35' 3"
DMax dumping height (7.24 m with the 3.2 m arm)
25' 0"
EMin swing radius (4.46 m with the 3.2 m arm)
14' 8"
FMax vertical wall digging depth (6.42 m with the 3.2 m arm)
23' 10"

Weight

Operating weight (800 mm shoes, 6.4 m boom, 4.0 m arm, 1.76 m3 HD bucket, standard counterweight, full fuel tank, 79 kg operator)
80,985 lb
Counterweight
15,274 lb
Ground pressure (800 mm triple semi-grouser shoes)
50.1 kPa
Undercarriage weight (With 800 mm triple semi-grouser shoes)
28,100 lb
Boom weight (6.4 m one-piece boom with arm cylinder)
6,790 lb
Arm weight (4.0 m arm with bucket cylinder and linkage; 3.2 m arm 1,802 kg)
4,376 lb
Boom cylinders weight (Pair of boom-lift cylinders)
1,376 lb
Bucket weight (1,372 mm HD bucket)
3,377 lb

Performance

Bucket capacity (1,372 mm (54 in) heavy-duty bucket)
2.3 yd3
Bucket digging force (ISO, with power boost; SAE 225.2 kN (50,628 lbf) with the 4.0 m arm)
55,303 lbf
Arm digging force (ISO, 4.0 m arm; SAE 152.6 kN (34,314 lbf). 3.2 m arm: 185 kN ISO / 177 kN SAE)
35,745 lbf
Swing speed
10.7 rpm
Max swing torque
88,500 lb-ft
Travel speed (high)
3.1 mph
Travel speed (low)
2.0 mph
Max drawbar pull
66,900 lb
Off-level capacity (70% slope)
35°

Engine

Engine model
John Deere PowerTech PSS 9.0 L
Emissions
EPA Final Tier 4 / EU Stage IV
Cylinders
6
Displacement
549 in3
Bore (Estimate: bore of Deere's PowerTech PSS 9.0L (6090) engine family, from the 6090HFC09 PSS spec sheet; the excavator sheet does not print it)
4.66 inest.
Stroke (Estimate: stroke of Deere's PowerTech PSS 9.0L (6090) engine family, from the 6090HFC09 PSS spec sheet; the excavator sheet does not print it)
5.35 inest.
Net power (ISO 9249, at 1,900 rpm)
271 hp
Aspiration
Series turbocharged, air-to-air charge-air cooler
Cooling
Electric on-demand fans; reversing electric variable-speed fan drive optional with the debris package

Hydraulics

Pump flow (Two variable-displacement pumps, open-centre, pilot controlled)
2 x 288 L/min
Max pressure (Implement circuit, 34,300 kPa)
4,975 psi
Max pressure, power boost (38,000 kPa)
5,511 psi
Max pressure, travel (35,500 kPa)
5,149 psi
Max pressure, swing (33,300 kPa)
4,830 psi
Pilot pump flow (Gear pump, setting 3,900 kPa (566 psi))
8.0 gpm
Boom cylinders (2)
145 mm bore, 100 mm rod, 1,520 mm stroke
Arm cylinder
170 mm bore, 115 mm rod, 1,740 mm stroke
Bucket cylinder (Mass-excavating (ME) bucket: 145 mm bore, 95 mm rod, 1,250 mm stroke)
140 mm bore, 95 mm rod, 1,250 mm stroke

Undercarriage

Track rollers (each side)
8
Carrier rollers (each side)
2
Track shoes (each side) (Triple semi-grouser)
48
Track guides
3 per side
Track adjustment
Hydraulic
Track chain
Sealed and lubricated

Electrical

Batteries
2 x 12 V, 1,400 CCA
Alternator
300 A
Work lights
2 halogen (one on boom, one on frame)

Service capacities

Fuel tank
166 gal
Cooling system
10.5 gal
Engine oil (With filter)
7.2 gal
Swing drive
12.5 qt
Final drive (each)
9.0 qt
Pump drive
1.2 qt
Hydraulic system, with tank
77 gal
Hydraulic tank
51 gal
DEF tank
9.3 gal