Specification sheetIssued 20 November 2026
John Deere · excavator
John Deere 210 P-Tier
John Deere 210 P-Tier (the long-undercarriage 21 t excavator that replaced the 210G LC), figures from Deere's 210 P-Tier spec sheet ME210PAU for the 2.91 m arm, 700 mm triple semi-grouser shoes, standard boom and standard 4,250 kg counterweight. Engine is the Final Tier 4 / Stage IV PowerTech PVS 6.8L; the earlier 210G LC has a near-identical layout.
UAEGlobal
- digging depth
- 21' 11"
- power
- 159 hp
- Operating weight
- 51,251 lb
- Bucket capacity
- 1.19 yd3
9.7 ft12 ft31.7 ft
10.1 ftWorking range
- AMax digging reach
- 32' 7"
- A'Max reach at ground level
- 32' 0"
- BMax digging depth
- 21' 11"
- B'Max digging depth (8' level) (2.44 m flat bottom)
- 21' 4"
- CMax digging height (Printed as maximum cutting height)
- 32' 11"
- DMax dumping height
- 23' 7"
- EMin swing radius
- 10' 5"
- FMax vertical wall digging depth
- 19' 8"
Weight
- Operating weight (700 mm shoes, standard counterweight and boom, 0.91 m3 bucket, 2.91 m arm, full fuel tank, 79 kg operator. 600 mm: 22,857 kg; 800 mm: 23,560 kg; with heavy counterweight and HD boom: 23,557 / 23,947 / 24,260 kg for 600 / 700 / 800 mm)
- 51,251 lb
- Counterweight (Standard; heavy counterweight 4,850 kg)
- 9,370 lb
- Ground pressure (700 mm shoes, standard counterweight; 600 mm 44.4 kPa, 800 mm 34.4 kPa)
- 39.3 kPa
- Undercarriage weight (LC undercarriage with 700 mm triple semi-grouser shoes; 600 mm 7,335 kg, 800 mm 8,038 kg)
- 17,015 lb
- Boom weight (One-piece boom with arm cylinder; HD boom 1,781 kg)
- 3,813 lb
- Arm weight (2.91 m arm with bucket cylinder and linkage)
- 2,205 lb
- Boom cylinders weight (Pair of boom-lift cylinders)
- 780 lb
- Bucket weight (1,065 mm general-purpose bucket)
- 1,951 lb
Performance
- Bucket capacity (1,065 mm (42 in) general-purpose bucket, SAE heaped)
- 1.19 yd3
- Bucket digging force (ISO, with power boost; SAE 141 kN (31,698 lbf))
- 35,520 lbf
- Arm digging force (ISO, 2.91 m arm; SAE 110 kN (24,729 lbf))
- 25,628 lbf
- Swing speed
- 13.3 rpm
- Max swing torque
- 50,662 lb-ft
- Travel speed (high)
- 3.4 mph
- Travel speed (low)
- 2.2 mph
- Max drawbar pull (Turtle mode)
- 45,636 lb
- Off-level capacity (70% slope)
- 35°
Engine
- Engine model
- John Deere PowerTech PVS 6.8L (6068HT106)
- Emissions
- EPA Final Tier 4 / EU Stage IV
- Cylinders
- 6
- Displacement
- 415 in3
- Bore (Estimate: bore of Deere's PowerTech PVS 6.8L (6068) engine family, from the 6068HFC08 PVS spec sheet; the excavator sheet does not print it)
- 4.17 inest.
- Stroke (Estimate: stroke of Deere's PowerTech PVS 6.8L (6068) engine family, from the 6068HFC08 PVS spec sheet; the excavator sheet does not print it)
- 5.00 inest.
- Net power (ISO 9249, at 2,000 rpm)
- 159 hp
- Aspiration
- Turbocharged, air-to-air charge-air cooler
- Cooling
- Reversing electric variable-speed fan drive
Hydraulics
- Pump flow (Two variable-displacement axial-piston pumps, open-centre load-sensing)
- 2 x 212 L/min
- Max pressure (Implement circuit, 34,300 kPa)
- 4,975 psi
- Max pressure, power boost (38,000 kPa)
- 5,511 psi
- Max pressure, travel (35,500 kPa)
- 5,149 psi
- Max pressure, swing (33,300 kPa)
- 4,830 psi
- Pilot pump flow (Gear pump, setting 4,000 kPa (580 psi))
- 7.9 gpm
- Boom cylinders (2)
- 120 mm bore, 85 mm rod, 1,260 mm stroke
- Arm cylinder
- 135 mm bore, 95 mm rod, 1,475 mm stroke
- Bucket cylinder
- 115 mm bore, 80 mm rod, 1,060 mm stroke
Undercarriage
- Track rollers (each side)
- 8
- Carrier rollers (each side)
- 2
- Track shoes (each side) (Triple semi-grouser)
- 49
- Track adjustment
- Hydraulic
- Track chain
- Sealed and lubricated, centre guides
Electrical
- Batteries
- 2 x 12 V, 950 CCA
- Alternator
- 300 A
- Work lights
- 2 LED (one on left of boom, one on frame)
Service capacities
- Fuel tank
- 106.5 gal
- Cooling system
- 9.4 gal
- Engine oil (With filter)
- 5.5 gal
- Swing drive
- 6.6 qt
- Final drive (each)
- 8.2 qt
- Pump drive
- 1.1 qt
- Hydraulic system, with tank
- 63.4 gal
- Hydraulic tank
- 35.7 gal
- DEF tank
- 7.0 gal