Specification sheetIssued 20 November 2026
JLG · boom lift
JLG 510AJ
JLG 510AJ articulating boom lift (Europe/Middle East specification, 230 kg platform, Deutz D2011L03 engine) per JLG Europe's 510AJ spec sheet. Engine alternatives, tyres, capacities and function speeds are from JLG Australia's brochure and JLG service manual 3121181 (section 1).
UAEGlobal
- Platform height
- 51.8 ft
- Working height
- 58 ft 5 in
- Horizontal outreach
- 31.1 ft
- Platform capacity
- 500 lb
7.5 ft25.2 ft
7.7 ftDimensions
- Track width (33/1550 x 16.5 tyres) (12 x 16.5 tyres 1.66 m (65.3 in); 14 x 16.1 tyres 1.69 m)
- 66.3 in
Weight
- Operating weight (Certain options or country standards increase weight)
- 16,865 lb
- Gross machine weight (Service manual table 1-8)
- 16,104 lb
- Max ground bearing pressure (Service manual and Australian brochure give 3.37 kg/cm2 (48 psi) on standard tyres and 2.53 kg/cm2 (36 psi) on flotation tyres)
- 5.7 kg/cm2
- Max tyre load (Service manual table 1-8)
- 7,900 lb
Engine
- Engine model
- Deutz D2011L03, 3 cylinder diesel
- Gross power (Deutz D2011L03)
- 48.8 hp
- Displacement (Deutz D2011L03) (3 cylinders, 94 x 112 mm bore and stroke)
- 142 cu in
- Engine speed (Deutz D2011L03)
- 1,200 rpm low, 1,500 rpm mid (lift, swing, platform), 1,800 rpm mid (drive), 2,800 rpm high
- Engine model (alternative) (Fitted on JLG Australia machines)
- Perkins 404C-22, 4 cylinder diesel, 2.2 L
- Gross power (Perkins 404C-22) (At 2,800 rpm; 84 x 100 mm bore and stroke)
- 50 hp
- Engine model (alternative, Caterpillar)
- Caterpillar 3024 / C2.2, 4 cylinder diesel, 2.2 L
- Gross power (Caterpillar C2.2) (84 x 112 mm bore and stroke, 2,800 rpm max)
- 46.5 hp
- Electrical system
- 12 V DC
- Auxiliary power
- 12 V DC
- Generator (option)
- 4,000 W or 7,500 W onboard (SkyPower); 5.5 kVA Miller on Australian machines
Hydraulics
- Max hydraulic system pressure (Service manual table 1-8)
- 4,500 psi
- Hydraulic oil
- Mobilfluid 424 (API GL-3); Mobil DTE 13 below -7 C
Performance
- Platform height
- 51.8 ft
- Working height (Australian brochure)
- 58 ft 5 in
- Horizontal outreach
- 31.1 ft
- Up and over height (Europe sheet; the service manual gives 7.34 m (24.08 ft))
- 25 ft 2 in
- Platform capacity (Unrestricted)
- 500 lb
- Swing (Non-continuous; service manual gives 357 degrees)
- 360°
- Platform rotation (Hydraulic rotator)
- 180°
- Jib length (Service manual gives 1.37 m)
- 4 ft 1 in
- Jib range of articulation (+78 / -67 degrees; Australian brochure +75 / -70)
- 145°
- Drive speed (4WD)
- 4.5 mph
- Gradeability (Rated gradeability 40% in the service manual)
- 45%
- Turning radius (inside)
- 6 ft 6 in
- Turning radius (outside)
- 16.4 ft
- Axle oscillation (Optional on the Europe sheet; standard on Australian machines)
- 8 in
- Tilt cut-out (Multi-axis level sensor)
- 4°
- Function speed, main lift up (Service manual table 1-9; lift down 20 to 24 s)
- 24 to 28 s
- Function speed, telescope out (Telescope in 12 to 16 s)
- 18 to 22 s
- Function speed, swing (full turn)
- 85 to 95 s
- Function speed, platform rotate
- 25 to 32 s
- Function speed, jib up (Jib down 19 to 25 s)
- 21 to 31 s
- Function speed, lower lift up (Lower lift down 22 to 28 s)
- 30 to 38 s
- Function speed, drive over 200 ft (4WD high engine, 4.5 mph; above horizontal 46 to 68 s over 50 ft)
- 29 to 31 s
Tyres
- Tyres
- Foam filled 33/1550 x 16.5 (standard)
- Tyres (option) (Australian machines use urethane filled 12 x 16.5)
- Foam filled non-marking 12 x 16.5; 14 x 16.1 foam filled
- Tyre weight (33/1550 x 16.5, foam filled)
- 395 lb
- Tyre weight (12 x 16.5, foam filled)
- 328 lb
- Tyre weight (14 x 16.1, foam filled)
- 426 lb
Service capacities
- Fuel tank (Service manual 64.3 L; Australian brochure 62.5 L)
- 17 gal
- Hydraulic tank (Service manual gives 102 L (27 gal, 89 L to the full line); Australian brochure 113.6 L)
- 32 gal
- Engine oil, with filter (Deutz D2011L03) (Crankcase 6 L plus cooler 4.5 L)
- 11 qt
- Engine oil, with filter (Perkins 404C-22) (Caterpillar C2.2 also 9.4 L)
- 10 qt