JLG 510AJ
Show imperial
EquipmentsFinder

Specification sheetIssued 20 November 2026

JLG · boom lift

JLG 510AJ

JLG 510AJ articulating boom lift (Europe/Middle East specification, 230 kg platform, Deutz D2011L03 engine) per JLG Europe's 510AJ spec sheet. Engine alternatives, tyres, capacities and function speeds are from JLG Australia's brochure and JLG service manual 3121181 (section 1).

UAEGlobal

Platform height
15.81 m
Working height
17.81 m
Horizontal outreach
9.48 m
Platform capacity
230 kg
JLG 510AJ, side view with dimensions (illustration)2.29 m7.68 m
JLG 510AJ, front view (illustration)2.34 m

Dimensions

Track width (33/1550 x 16.5 tyres) (12 x 16.5 tyres 1.66 m (65.3 in); 14 x 16.1 tyres 1.69 m)
1.69 m

Weight

Operating weight (Certain options or country standards increase weight)
7,650 kg
Gross machine weight (Service manual table 1-8)
7,305 kg
Max ground bearing pressure (Service manual and Australian brochure give 3.37 kg/cm2 (48 psi) on standard tyres and 2.53 kg/cm2 (36 psi) on flotation tyres)
5.7 kg/cm2
Max tyre load (Service manual table 1-8)
3,583 kg

Engine

Engine model
Deutz D2011L03, 3 cylinder diesel
Gross power (Deutz D2011L03)
36.4 kW (48.8 hp)
Displacement (Deutz D2011L03) (3 cylinders, 94 x 112 mm bore and stroke)
2.3 L
Engine speed (Deutz D2011L03)
1,200 rpm low, 1,500 rpm mid (lift, swing, platform), 1,800 rpm mid (drive), 2,800 rpm high
Engine model (alternative) (Fitted on JLG Australia machines)
Perkins 404C-22, 4 cylinder diesel, 2.2 L
Gross power (Perkins 404C-22) (At 2,800 rpm; 84 x 100 mm bore and stroke)
37.3 kW (50 hp)
Engine model (alternative, Caterpillar)
Caterpillar 3024 / C2.2, 4 cylinder diesel, 2.2 L
Gross power (Caterpillar C2.2) (84 x 112 mm bore and stroke, 2,800 rpm max)
34 kW (46.5 hp)
Electrical system
12 V DC
Auxiliary power
12 V DC
Generator (option)
4,000 W or 7,500 W onboard (SkyPower); 5.5 kVA Miller on Australian machines

Hydraulics

Max hydraulic system pressure (Service manual table 1-8)
310 bar
Hydraulic oil
Mobilfluid 424 (API GL-3); Mobil DTE 13 below -7 C

Performance

Platform height
15.81 m
Working height (Australian brochure)
17.81 m
Horizontal outreach
9.48 m
Up and over height (Europe sheet; the service manual gives 7.34 m (24.08 ft))
7.67 m
Platform capacity (Unrestricted)
230 kg
Swing (Non-continuous; service manual gives 357 degrees)
360°
Platform rotation (Hydraulic rotator)
180°
Jib length (Service manual gives 1.37 m)
1.24 m
Jib range of articulation (+78 / -67 degrees; Australian brochure +75 / -70)
145°
Drive speed (4WD)
7.2 km/h
Gradeability (Rated gradeability 40% in the service manual)
45%
Turning radius (inside)
2 m
Turning radius (outside)
5 m
Axle oscillation (Optional on the Europe sheet; standard on Australian machines)
0.2 m
Tilt cut-out (Multi-axis level sensor)
4°
Function speed, main lift up (Service manual table 1-9; lift down 20 to 24 s)
24 to 28 s
Function speed, telescope out (Telescope in 12 to 16 s)
18 to 22 s
Function speed, swing (full turn)
85 to 95 s
Function speed, platform rotate
25 to 32 s
Function speed, jib up (Jib down 19 to 25 s)
21 to 31 s
Function speed, lower lift up (Lower lift down 22 to 28 s)
30 to 38 s
Function speed, drive over 200 ft (4WD high engine, 4.5 mph; above horizontal 46 to 68 s over 50 ft)
29 to 31 s

Tyres

Tyres
Foam filled 33/1550 x 16.5 (standard)
Tyres (option) (Australian machines use urethane filled 12 x 16.5)
Foam filled non-marking 12 x 16.5; 14 x 16.1 foam filled
Tyre weight (33/1550 x 16.5, foam filled)
179 kg
Tyre weight (12 x 16.5, foam filled)
149 kg
Tyre weight (14 x 16.1, foam filled)
193 kg

Service capacities

Fuel tank (Service manual 64.3 L; Australian brochure 62.5 L)
64 L
Hydraulic tank (Service manual gives 102 L (27 gal, 89 L to the full line); Australian brochure 113.6 L)
121 L
Engine oil, with filter (Deutz D2011L03) (Crankcase 6 L plus cooler 4.5 L)
10.5 L
Engine oil, with filter (Perkins 404C-22) (Caterpillar C2.2 also 9.4 L)
9.4 L