JCB 8018

JCB 8018 CTS (conventional tailswing, cab, rubber tracks, 403D-11 engine, standard 1161 mm dipper) per JCB spec sheet DWUSA 3243 05/13 (US/Canada). The 8018 is discontinued; its successor is the 19C-1 (not the 18Z-1, which is the zero-tail 1.7 t model). No Galadari/JCB Middle East 8018 sheet found.

Global

digging depth: 7 ft
power: 19 hp
Operating weight: 4,017 lb

Side

Front

Overall length: 11-6
Transport height: 7-7
Overall height (to top of cab): 7-7
Upperstructure width: 3-2 1/2
Width of crawler: 3-2 1/2
Track gauge: 2-5 1/2
Track length on ground: 3-8
Track length: 5-10
Kingpost clearance: 1-3
Tail swing radius: 3-6
Ground clearance (minimum): 0-6
Track height: 1-2

Undercarriage

Shoe width (rubber track): 0.8 ft

Performance

AMax digging reach: 12.9 ft
BMax reach at ground level: 12.7 ft
CMax digging depth: 7 ft
DMax digging height: 11.4 ft
EMax dumping height: 8.4 ft
FMax height to dipper nose pivot pin: 9.8 ft
GMax vertical wall cut depth: 5.7 ft
Min front swing radius: 5.6 ft
Boom swing: 55 deg. left / 75 deg. right
Bucket digging force (bucket tearout): 3642 lbf
Arm digging force: 2068 lbf
Swing speed: 8.1 rpm
Travel speed (high): 2.4 mph
Travel speed (low): 1.2 mph
Tractive effort: 2,540 lbf
Ground pressure: 0.32 kg/cm2

Weight

Operating weight: 4,017 lb
Transport weight: 3,849 lb

Engine

Engine model: 403D-11
Displacement (1,131 cc): 0.3 US gal
Gross power (at 2,200 rpm): 19.7 hp
Net power (at 2,200 rpm): 19 hp
Max torque (gross, at 1,900 rpm (64.2 Nm net)): 49 lbf·ft

Hydraulics

Pump flow: 11.5 US gpm
Max pressure (excavator/track main relief): 3,336 psi
Slew relief pressure: 2,321 psi
Auxiliary flow (gear pump; 34.2 with variable pump): 8.3 US gpm

Blade

Blade width (1.38 m extended): 3.3 ft
Blade height: 0.6 ft
Max blade lift above ground: 0.8 ft
Max blade drop below ground: 1.2 ft

Service capacities

Fuel tank: 6.2 US gal
Cooling system: 1.3 US gal
Engine oil, with filter (engine oil): 1.1 US gal
Hydraulic system, with tank: 7.4 US gal
Hydraulic tank: 6.6 US gal