JCB 8018

JCB 8018 CTS (conventional tailswing, cab, rubber tracks, 403D-11 engine, standard 1161 mm dipper) per JCB spec sheet DWUSA 3243 05/13 (US/Canada). The 8018 is discontinued; its successor is the 19C-1 (not the 18Z-1, which is the zero-tail 1.7 t model). No Galadari/JCB Middle East 8018 sheet found.

Global

digging depth: 2.142 m
power: 14.2 kW (19 hp)
Operating weight: 1,822 kg

Side

Front

Overall length: 3.523 m
Transport height: 2.318 m
Overall height (to top of cab): 2.318 m
Upperstructure width: 0.98 m
Width of crawler: 0.98 m
Track gauge: 0.75 m
Track length on ground: 1.127 m
Track length: 1.484 m
Kingpost clearance: 0.376 m
Tail swing radius: 1.059 m
Ground clearance (minimum): 0.158 m
Track height: 0.366 m

Undercarriage

Shoe width (rubber track): 0.23 m

Performance

AMax digging reach: 3.933 m
BMax reach at ground level: 3.865 m
CMax digging depth: 2.142 m
DMax digging height: 3.46 m
EMax dumping height: 2.568 m
FMax height to dipper nose pivot pin: 2.973 m
GMax vertical wall cut depth: 1.75 m
Min front swing radius: 1.715 m
Boom swing: 55 deg. left / 75 deg. right
Bucket digging force (bucket tearout): 16 kN
Arm digging force: 9 kN
Swing speed: 8.1 rpm
Travel speed (high): 3.8 km/h
Travel speed (low): 2 km/h
Tractive effort: 11 kN
Ground pressure: 0.32 kg/cm2

Weight

Operating weight: 1,822 kg
Transport weight: 1,746 kg

Engine

Engine model: 403D-11
Displacement (1,131 cc): 1.1 L
Gross power (at 2,200 rpm): 14.7 kW (19.7 hp)
Net power (at 2,200 rpm): 14.2 kW (19 hp)
Max torque (gross, at 1,900 rpm (64.2 Nm net)): 67 Nm

Hydraulics

Pump flow: 44 L/min
Max pressure (excavator/track main relief): 230 bar
Slew relief pressure: 160 bar
Auxiliary flow (gear pump; 34.2 with variable pump): 31 L/min

Blade

Blade width (1.38 m extended): 1 m
Blade height: 0.175 m
Max blade lift above ground: 0.246 m
Max blade drop below ground: 0.38 m

Service capacities

Fuel tank: 23.5 L
Cooling system: 5 L
Engine oil, with filter (engine oil): 4 L
Hydraulic system, with tank: 28 L
Hydraulic tank: 25 L