JCB 533-105
Show metric
EquipmentsFinder

Specification sheetIssued 20 November 2026

JCB · telehandler

JCB 533-105

JCB 533-105 Loadall with stabilisers, per JCB's specification sheet 9999/4892 (5/08, Issue 5). Engine is the 63 kW JCB 4.4 L diesel (Stage II or III) with the 74.2 kW option; the current Stage V 533-105 differs in weight and lift figures.

UAEGlobal

lift capacity
7,277 lb
Lift height
33 ft 6 in
forward reach
22 ft 5 in
power
85 hp
JCB 533-105, side view with dimensions (illustration)8.2 ft9 ft14.4 ft
JCB 533-105, front view (illustration)7.5 ft

Dimensions

Overall width with stabilisers fully deployed
8 ft 8 in
Outside turn radius (over tyres)
12 ft 2 in
Carriage rollback angle
41°
Carriage dump angle
24°

Weight

Operating weight
19,506 lb

Engine

Engine model (Stage II (naturally aspirated) or Stage III (turbo), territory dependent)
JCB 4-cylinder diesel, 4.4 L
Gross power (Standard engine, at 2,200 rpm)
85 hp
Max torque (Standard Stage III turbo engine at 1,200 rpm; 320 Nm on the Stage II naturally aspirated engine)
267 lbf ft
Gross power, high-power engine (Optional, at 2,200 rpm)
100 hp
Max torque, high-power engine (Optional Stage III, turbo, at 1,300 rpm; 425 Nm (313 lbf ft) on the Stage II version)
324 lbf ft
Displacement
269 in3
Cylinders
4
Bore x stroke
103 x 132 mm

Transmission

Transmission
Torque converter, 4-speed powershift (4 forward, 4 reverse)
Top speed (33 km/h (20 mph) when 2/4WD disconnect is selected)
18 mph
Drive (JCB epicyclic hub-reduction drive/steer axles with Max-Trac torque-proportioning differentials)
Permanent 4-wheel drive
Service brakes
Servo-assisted, hydraulically activated, self-adjusting, oil-immersed in-board multi-disc on the front axle
Parking brake
Hand-operated disc brake on the gearbox output
Steering
Hydrostatic power steering with power track rods on both axles: front-wheel, all-wheel or crab steer

Hydraulics

Max pressure (Operating system pressure)
3,500 psi
Pump flow
21.7 US gpm
Boom raise / lower time
8.8 / 8.5 s
Extend / retract time
13.2 / 13.6 s
Carriage dump / crowd time
2.4 / 3.4 s

Lift performance

Max lift capacity
7,277 lb
Lift capacity to full height (Stabilisers extended)
7,277 lb
Lift capacity at full reach (Stabilisers extended)
2,205 lb
Lift height (Stabilisers extended)
33 ft 6 in
Reach at max lift height (Stabilisers extended)
6 ft 3 in
Max forward reach (Stabilisers extended)
22 ft 5 in
Reach with 1 tonne load (Stabilisers extended)
22 ft 5 in
Placing height (Stabilisers extended; EN 1459 Annex B)
32 ft 3 in
Lift capacity to full height, stabilisers retracted
2,205 lb
Lift capacity at full reach, stabilisers retracted
827 lb
Lift height, stabilisers retracted
32 ft 4 in
Reach at max lift height, stabilisers retracted
8 ft 8 in
Max forward reach, stabilisers retracted
22 ft 8 in
Reach with 1 tonne load, stabilisers retracted
15 ft 10 in
Placing height, stabilisers retracted
30 ft 11 in

Tyres

Tyres (Traction and industrial tyres optional)
15.5/80-24

Service capacities

Fuel tank
32.5 UK gal
Hydraulic tank
28.8 UK gal
Cooling system
5.1 UK gal

Cab and electrics

Cab
ROPS ISO 3471 and FOPS ISO 3449
Electrics
12 V negative earth, 95 Ah battery, 95 A alternator