JCB 533-105
Show imperial
EquipmentsFinder

Specification sheetIssued 20 November 2026

JCB · telehandler

JCB 533-105

JCB 533-105 Loadall with stabilisers, per JCB's specification sheet 9999/4892 (5/08, Issue 5). Engine is the 63 kW JCB 4.4 L diesel (Stage II or III) with the 74.2 kW option; the current Stage V 533-105 differs in weight and lift figures.

UAEGlobal

lift capacity
3,300 kg
Lift height
10.22 m
forward reach
6.83 m
power
63 kW (85 hp)
JCB 533-105, side view with dimensions (illustration)2.49 m2.75 m4.38 m
JCB 533-105, front view (illustration)2.29 m

Dimensions

Overall width with stabilisers fully deployed
2.63 m
Outside turn radius (over tyres)
3.7 m
Carriage rollback angle
41°
Carriage dump angle
24°

Weight

Operating weight
8,850 kg

Engine

Engine model (Stage II (naturally aspirated) or Stage III (turbo), territory dependent)
JCB 4-cylinder diesel, 4.4 L
Gross power (Standard engine, at 2,200 rpm)
63 kW (85 hp)
Max torque (Standard Stage III turbo engine at 1,200 rpm; 320 Nm on the Stage II naturally aspirated engine)
362 Nm
Gross power, high-power engine (Optional, at 2,200 rpm)
74.2 kW (100 hp)
Max torque, high-power engine (Optional Stage III, turbo, at 1,300 rpm; 425 Nm (313 lbf ft) on the Stage II version)
440 Nm
Displacement
4.4 L
Cylinders
4
Bore x stroke
103 x 132 mm

Transmission

Transmission
Torque converter, 4-speed powershift (4 forward, 4 reverse)
Top speed (33 km/h (20 mph) when 2/4WD disconnect is selected)
29 km/h
Drive (JCB epicyclic hub-reduction drive/steer axles with Max-Trac torque-proportioning differentials)
Permanent 4-wheel drive
Service brakes
Servo-assisted, hydraulically activated, self-adjusting, oil-immersed in-board multi-disc on the front axle
Parking brake
Hand-operated disc brake on the gearbox output
Steering
Hydrostatic power steering with power track rods on both axles: front-wheel, all-wheel or crab steer

Hydraulics

Max pressure (Operating system pressure)
241 bar
Pump flow
82 L/min
Boom raise / lower time
8.8 / 8.5 s
Extend / retract time
13.2 / 13.6 s
Carriage dump / crowd time
2.4 / 3.4 s

Lift performance

Max lift capacity
3,300 kg
Lift capacity to full height (Stabilisers extended)
3,300 kg
Lift capacity at full reach (Stabilisers extended)
1,000 kg
Lift height (Stabilisers extended)
10.22 m
Reach at max lift height (Stabilisers extended)
1.91 m
Max forward reach (Stabilisers extended)
6.83 m
Reach with 1 tonne load (Stabilisers extended)
6.83 m
Placing height (Stabilisers extended; EN 1459 Annex B)
9.82 m
Lift capacity to full height, stabilisers retracted
1,000 kg
Lift capacity at full reach, stabilisers retracted
375 kg
Lift height, stabilisers retracted
9.85 m
Reach at max lift height, stabilisers retracted
2.63 m
Max forward reach, stabilisers retracted
6.91 m
Reach with 1 tonne load, stabilisers retracted
4.83 m
Placing height, stabilisers retracted
9.44 m

Tyres

Tyres (Traction and industrial tyres optional)
15.5/80-24

Service capacities

Fuel tank
148 L
Hydraulic tank
131 L
Cooling system
23 L

Cab and electrics

Cab
ROPS ISO 3471 and FOPS ISO 3449
Electrics
12 V negative earth, 95 Ah battery, 95 A alternator