Specification sheetIssued 20 November 2026
Hitachi · excavator
Hitachi ZX200-5G
Hitachi ZX200-5G (standard undercarriage, 5.68 m boom, 2.91 m arm, 600 mm triple-grouser shoes, 0.80 m3 ISO heaped bucket, 4,200 kg counterweight) from Hitachi Construction Machinery Asia and Pacific's ZAXIS-5G Southeast Asia brochure KA-EN182HMAP-Q (June 2019). Hitachi's UAE site lists the ZX200-5G; the long-undercarriage ZX210LC-5G figures are not used.
UAEGlobal
- digging depth
- 21.9 ft
- power
- 168 HP
- Operating weight
- 43,650 lb
- Bucket capacity
- 1.05 yd³
9.7 ft11.1 ft31.7 ft
9.4 ftWorking range
- B'Max digging depth, 2.5 m flat bottom
- 21.3 ft
- D'Min dumping height
- 8.7 ft
- EMin swing radius
- 10.4 ft
Weight
- Operating weight (600 mm triple-grouser shoes, 5.68 m boom, 2.91 m arm, 0.80 m3 bucket; the ZX210LC-5G is 20,400 kg)
- 43,650 lb
- Operating weight, 700 mm shoes
- 44,533 lb
- Operating weight, 800 mm shoes
- 45,195 lb
- Ground pressure (600 mm shoes; 39 kPa (0.40) with 700 mm and 34 kPa (0.35) with 800 mm shoes)
- 44 kPa (0.45 kgf/cm2)
- Basic machine weight (600 mm shoes; excluding front attachment, fuel, hydraulic oil and coolant, including counterweight)
- 33,951 lb
- Counterweight
- 9,259 lb
- Boom weight (With boom and arm cylinder)
- 4,806 lb
- Arm weight (2.91 m arm, with bucket cylinder)
- 2,028 lb
- Bucket weight (0.80 m3 bucket)
- 1,455 lb
Performance
- Bucket capacity (ISO heaped; bucket width 1,030 mm without and 1,140 mm with side cutters, 5 teeth (p.21))
- 1.05 yd³
- Bucket digging force (ISO, at power boost; 16,200 kgf)
- 35,520 lbf
- Bucket digging force (SAE PCSA) (SAE PCSA, at power boost; 14,400 kgf)
- 31,698 lbf
- Arm digging force (Arm crowd force, ISO, at power boost; 11,600 kgf)
- 25,628 lbf
- Arm digging force (SAE PCSA) (Arm crowd force, SAE PCSA, at power boost; 11,200 kgf)
- 24,729 lbf
- Swing speed
- 13.5 rpm
- Max swing torque (6,900 kgfm)
- 50,154 lbf·ft
- Travel speed (high) (Low 3.5 km/h; automatic High-Low transmission)
- 3.4 mph
- Travel speed (low)
- 2.2 mph
- Max drawbar pull (20,700 kgf; Hitachi prints this as maximum traction force)
- 45,636 lbf
- Gradeability (70%, continuous)
- 35°
- AMax digging reach
- 32.5 ft
- A'Max reach at ground level
- 32 ft
- BMax digging depth (Excluding track shoe lug)
- 21.9 ft
- CMax digging height (Hitachi's 'max. cutting height')
- 32.9 ft
- DMax dumping height
- 23.6 ft
- FMax vertical wall digging depth
- 19.7 ft
Engine
- Engine model
- Isuzu CC-6BG1T
- Type
- 4-cycle water-cooled, direct injection
- Aspiration
- Turbocharged, intercooled
- Emissions
- EU Stage II / US EPA Tier 2
- Cylinders
- 6
- Bore
- 0.3 ft
- Stroke
- 0.4 ft
- Displacement
- 1.7 US gal
- Net power (ISO 9249 and SAE J1349, at 2,100 rpm)
- 168 HP
- Max torque (65 kgfm at 1,800 rpm)
- 470 lbf·ft
- Batteries
- 2 x 12 V / 88 Ah
Hydraulics
- Main pumps
- 2 variable-displacement axial piston pumps
- Pump flow (Maximum, 2 x 212 L/min)
- 112 US gpm
- Pilot pump
- 1 gear pump, 33.6 L/min
- Max pressure (Implement relief valve setting; 38.0 MPa (388 kgf/cm2) with power boost)
- 34.3 MPa (350 kgf/cm2)
- Max pressure, swing (Relief valve setting)
- 34.3 MPa (350 kgf/cm2)
- Max pressure, travel (Relief valve setting)
- 34.3 MPa (350 kgf/cm2)
- Pilot circuit pressure
- 3.9 MPa (40 kgf/cm2)
- Power boost pressure
- 38.0 MPa (388 kgf/cm2)
- Travel motors
- 2 variable-displacement swash plate piston motors
- Swing motor
- 1 swash plate piston motor
- Boom cylinders
- 2 - bore 120 mm, rod 85 mm
- Arm cylinder
- 1 - bore 135 mm, rod 95 mm
- Bucket cylinder
- 1 - bore 115 mm, rod 80 mm
Undercarriage
- Upper rollers (each side)
- 2
- Lower rollers (each side) (8 on ZX210LC-5G)
- 7
- Track shoes (each side) (49 on ZX210LC-5G)
- 46
- Track guards
- 1
- Standard shoes (700 and 800 mm triple-grouser shoes are options)
- 600 mm triple grouser
- Track adjuster
- Hydraulic (grease) with shock-absorbing recoil springs
- Parking brake
- Spring-set, hydraulic-released disc type
- Swing parking brake
- Spring-set, hydraulic-released disc type
Service capacities
- Fuel tank
- 105.7 US gal
- Cooling system (Engine coolant)
- 6.1 US gal
- Engine oil
- 6.6 US gal
- Swing drive (Swing device)
- 1.6 US gal
- Final drive (each) (Travel device, each side)
- 1.8 US gal
- Hydraulic system, with tank (Whole system)
- 63.4 US gal
- Hydraulic tank
- 35.7 US gal