Hino 700
Show metric
EquipmentsFinder

Specification sheetIssued 20 November 2026

Hino · truck

Hino 700

Hino 700 Series FS 2845 (FS1ELKA) 6x4 cab chassis with leaf rear suspension, 4,275 mm wheelbase, E13C-BL 12.9 L Euro 6, 12-speed AMT, 28,300 kg GVM and 63,000 kg GCM, from the Hino Distributors New Zealand specification sheet. Hino Middle East publishes no 700 Series sheet; the Philippine Euro 4 E13C tractors (SH1EESA, SS1EKSA) are listed under Other variants.

UAEGlobal

power
450 hp @ 1,600-1,800 rpm
torque
1,591 lb-ft @ 1,000-1,500 rpm
Wheelbase
14 ft 0.3 in
Hino 700, side view with dimensions (illustration)9.9 ft14 ft25.1 ft
Hino 700, front view (illustration)8.2 ft

Dimensions

Front axle to back of cab (Estimate: wheelbase 4,275 - cab to axle centre 3,605 mm (leaf suspension))
26.4 inest.
Bumper to back of cab (BBC) (Estimate: front overhang 1,410 + wheelbase 4,275 - cab to axle centre 3,605 mm (leaf suspension))
81.9 inest.
Front chassis height
3 ft 3.8 in
Rear chassis height (leaf suspension; 1,055 mm with air suspension)
3 ft 5.9 in
Front track
6 ft 8.7 in
Rear track
6 ft 1 in
Road clearance (leaf suspension; 240 mm with air suspension)
9.6 in
Chassis width
2 ft 9.1 in
Turning circle (kerb to kerb)
51 ft 10 in
Turning circle (wall to wall)
57 ft 8.9 in
Steering angle (inner)
49°
Steering angle (outer)
34°

Engine

Engine model
Hino E13C-BL, 6-cylinder in-line, 4-stroke, turbocharged and intercooled, overhead camshaft, water-cooled, direct injection with electronic common rail
Emissions
Euro 6
Displacement
3.4 US gal
Bore and stroke
137 x 146 mm
Compression ratio
17.0 : 1
Net power (ISO net; hp is the maker's printed figure)
450 hp @ 1,600-1,800 rpm
Max torque (ISO net; lb-ft is a conversion)
1,591 lb-ft @ 1,000-1,500 rpm
Max engine speed
2,200 rpm
Emissions control
Euro 6; DPR, EGR and SCR (AdBlue)
Engine brake
Engine retarder (Jake brake), brake-pedal activated 'Brake Sync'
Air compressor
2-cylinder, 86 x 54 mm bore and stroke
Air cleaner
Stack type, paper element
Exhaust
Downward exhausting short type
Starter
24 V, 6.0 kW
Alternator
24 V, 90 A
Batteries
2 x 12 V, 150 Ah (145G51)
Engine immobiliser
Equipped

Transmission

Gearbox
Hino M112 12-speed automated manual (AMT); dash-mounted rotary switch with column-mounted sequential shifter
Gear ratios
1st 10.127, 2nd 8.054, 3rd 6.414, 4th 5.101, 5th 4.038, 6th 3.211, 7th 2.507, 8th 1.994, 9th 1.588, 10th 1.263, 11th 1.000, 12th 0.795, reverse 9.902 / 7.875
Clutch
DSF-430 dry single plate with damper springs, non-asbestos; ZF ConAct pneumatic actuation
Rear axle ratio
3.900 : 1 final drive
Top speed (theoretical, at 63,000 kg GCM with 11R22.5 tyres; engine speed 1,677 rpm at 100 km/h)
84.5 mph
Max gradeability
24.9 % (tan) at GVM

Weight

Gross vehicle weight
62,391 lb (39,683 lb alternative rating)
Gross combination weight
138,891 lb
Kerb weight (indicative chassis mass with 10 L fuel and standard tools, no spare tyre, +/-3 %; 7,785 kg with air suspension)
17,692 lb
Front axle load (kerb) (4,675 kg with air suspension)
10,417 lb
Rear axle load (kerb) (3,110 kg with air suspension)
7,275 lb
Front axle capacity (axle limit including suspension)
16,535 lb
Rear axle capacity (axle limit including suspension, leaf and air)
46,297 lb

Chassis

Service brakes
Full air, dual circuit, taper roller, leading and trailing shoes (drum); drum 406.4 mm diameter x 152 mm lining front, 406.4 x 216 mm rear; air dryer, automatic brake shoe adjusters
Brake electronics
ABS, EBS, ASR and Easy Start hill assist; trailer brake controls and connection
Steering
Telescopic and tilt column, recirculating ball, integral power steering, variable ratio
Front axle
MF781R, reversed Elliot I-section beam
Rear axle
THD 17 tandem drive with inter-axle differential lock and cross locks, full-floating, single reduction, single speed hypoid
Front suspension
Taper leaf springs with stabiliser
Rear suspension
Hino 6-rod with taper leaf springs (leaf model); Hendrickson HAS 460 air with ECAS (air model)
Frame
Ladder-shaped channel section side rails, 302 x 80 x 9.0 mm, tensile strength 620 N/mm2; tow hooks front and rear
Cab
Forward control, all-steel welded, fully floating air-suspended with electro-hydraulic power tilt; 2 seats; ISRI 7-way driver seat; heater and air conditioner; central locking with keyless entry; power windows; ECE-R29 cab strength certified
Safety systems
Hino SmartSafe: VSC, ABS, EBS, pre-collision system with autonomous emergency braking and pedestrian detection, lane departure warning, driver monitor, adaptive cruise control, reverse camera; driver SRS airbag and belt pretensioner; front underrun protection
Lighting
LED low-beam and daytime running lamps, halogen high beam, cornering lamps

Tyres

Tyres
11R22.5 (275/70R22.5 optional on leaf; 275/70R22.5 standard on air), 10 tyres
Wheels
Alcoa alloy, 10-stud ISO 335 PCD, 8.25 x 22.5 (wide single 11.75 x 22.5 optional)

Service capacities

Fuel tank
103 US gal, alloy, lockable cap, prefilter and sedimenter
AdBlue tank
7.4 US gal

Other variants

2042 Tractor SH1EESA (Philippines)
4x2, GVW 19,500 kg, GCM 45,500 kg, wheelbase 3,300 mm, 5,695 x 2,490 x 2,975 mm, E13C-UN Euro 4 12.913 L, 410 PS ISO net / 420 PS JIS gross, 1,863 / 1,903 Nm, 7-speed, 295/80R22.5, 400 L, 117 km/h
2846 Tractor SS1EKSA (Philippines)
6x4, GVW 28,300 kg, GCM 60,000 kg, wheelbase 3,300 + 1,310 mm, 7,005 x 2,490 x 3,325 mm, E13C-UR Euro 4 12.913 L, 450 PS ISO net / 460 PS JIS gross, 1,912 / 1,952 Nm, 16-speed, 295/80R22.5, 400 L, 125 km/h