Specification sheetIssued 20 November 2026
Hino · truck
Hino 700
Hino 700 Series FS 2845 (FS1ELKA) 6x4 cab chassis with leaf rear suspension, 4,275 mm wheelbase, E13C-BL 12.9 L Euro 6, 12-speed AMT, 28,300 kg GVM and 63,000 kg GCM, from the Hino Distributors New Zealand specification sheet. Hino Middle East publishes no 700 Series sheet; the Philippine Euro 4 E13C tractors (SH1EESA, SS1EKSA) are listed under Other variants.
UAEGlobal
- power
- 331 kW (450 hp @ 1,600-1,800 rpm)
- torque
- 2,157 Nm
- Wheelbase
- 4.275 m
3.02 m4.28 m7.65 m
2.49 mDimensions
- Front axle to back of cab (Estimate: wheelbase 4,275 - cab to axle centre 3,605 mm (leaf suspension))
- 0.67 mest.
- Bumper to back of cab (BBC) (Estimate: front overhang 1,410 + wheelbase 4,275 - cab to axle centre 3,605 mm (leaf suspension))
- 2.08 mest.
- Front chassis height
- 1.01 m
- Rear chassis height (leaf suspension; 1,055 mm with air suspension)
- 1.065 m
- Front track
- 2.05 m
- Rear track
- 1.855 m
- Road clearance (leaf suspension; 240 mm with air suspension)
- 0.245 m
- Chassis width
- 0.84 m
- Turning circle (kerb to kerb)
- 15.8 m
- Turning circle (wall to wall)
- 17.6 m
- Steering angle (inner)
- 49°
- Steering angle (outer)
- 34°
Engine
- Engine model
- Hino E13C-BL, 6-cylinder in-line, 4-stroke, turbocharged and intercooled, overhead camshaft, water-cooled, direct injection with electronic common rail
- Emissions
- Euro 6
- Displacement
- 12.9 L
- Bore and stroke
- 137 x 146 mm
- Compression ratio
- 17.0 : 1
- Net power (ISO net; hp is the maker's printed figure)
- 331 kW (450 hp @ 1,600-1,800 rpm)
- Max torque (ISO net; lb-ft is a conversion)
- 2,157 Nm
- Max engine speed
- 2,200 rpm
- Emissions control
- Euro 6; DPR, EGR and SCR (AdBlue)
- Engine brake
- Engine retarder (Jake brake), brake-pedal activated 'Brake Sync'
- Air compressor
- 2-cylinder, 86 x 54 mm bore and stroke
- Air cleaner
- Stack type, paper element
- Exhaust
- Downward exhausting short type
- Starter
- 24 V, 6.0 kW
- Alternator
- 24 V, 90 A
- Batteries
- 2 x 12 V, 150 Ah (145G51)
- Engine immobiliser
- Equipped
Transmission
- Gearbox
- Hino M112 12-speed automated manual (AMT); dash-mounted rotary switch with column-mounted sequential shifter
- Gear ratios
- 1st 10.127, 2nd 8.054, 3rd 6.414, 4th 5.101, 5th 4.038, 6th 3.211, 7th 2.507, 8th 1.994, 9th 1.588, 10th 1.263, 11th 1.000, 12th 0.795, reverse 9.902 / 7.875
- Clutch
- DSF-430 dry single plate with damper springs, non-asbestos; ZF ConAct pneumatic actuation
- Rear axle ratio
- 3.900 : 1 final drive
- Top speed (theoretical, at 63,000 kg GCM with 11R22.5 tyres; engine speed 1,677 rpm at 100 km/h)
- 136 km/h
- Max gradeability
- 24.9 % (tan) at GVM
Weight
- Gross vehicle weight
- 28,300 kg
- Gross combination weight
- 63,000 kg
- Kerb weight (indicative chassis mass with 10 L fuel and standard tools, no spare tyre, +/-3 %; 7,785 kg with air suspension)
- 8,025 kg
- Front axle load (kerb) (4,675 kg with air suspension)
- 4,725 kg
- Rear axle load (kerb) (3,110 kg with air suspension)
- 3,300 kg
- Front axle capacity (axle limit including suspension)
- 7,500 kg
- Rear axle capacity (axle limit including suspension, leaf and air)
- 21,000 kg
Chassis
- Service brakes
- Full air, dual circuit, taper roller, leading and trailing shoes (drum); drum 406.4 mm diameter x 152 mm lining front, 406.4 x 216 mm rear; air dryer, automatic brake shoe adjusters
- Brake electronics
- ABS, EBS, ASR and Easy Start hill assist; trailer brake controls and connection
- Steering
- Telescopic and tilt column, recirculating ball, integral power steering, variable ratio
- Front axle
- MF781R, reversed Elliot I-section beam
- Rear axle
- THD 17 tandem drive with inter-axle differential lock and cross locks, full-floating, single reduction, single speed hypoid
- Front suspension
- Taper leaf springs with stabiliser
- Rear suspension
- Hino 6-rod with taper leaf springs (leaf model); Hendrickson HAS 460 air with ECAS (air model)
- Frame
- Ladder-shaped channel section side rails, 302 x 80 x 9.0 mm, tensile strength 620 N/mm2; tow hooks front and rear
- Cab
- Forward control, all-steel welded, fully floating air-suspended with electro-hydraulic power tilt; 2 seats; ISRI 7-way driver seat; heater and air conditioner; central locking with keyless entry; power windows; ECE-R29 cab strength certified
- Safety systems
- Hino SmartSafe: VSC, ABS, EBS, pre-collision system with autonomous emergency braking and pedestrian detection, lane departure warning, driver monitor, adaptive cruise control, reverse camera; driver SRS airbag and belt pretensioner; front underrun protection
- Lighting
- LED low-beam and daytime running lamps, halogen high beam, cornering lamps
Tyres
- Tyres
- 11R22.5 (275/70R22.5 optional on leaf; 275/70R22.5 standard on air), 10 tyres
- Wheels
- Alcoa alloy, 10-stud ISO 335 PCD, 8.25 x 22.5 (wide single 11.75 x 22.5 optional)
Service capacities
- Fuel tank
- 390 L
- AdBlue tank
- 28 L
Other variants
- 2042 Tractor SH1EESA (Philippines)
- 4x2, GVW 19,500 kg, GCM 45,500 kg, wheelbase 3,300 mm, 5,695 x 2,490 x 2,975 mm, E13C-UN Euro 4 12.913 L, 410 PS ISO net / 420 PS JIS gross, 1,863 / 1,903 Nm, 7-speed, 295/80R22.5, 400 L, 117 km/h
- 2846 Tractor SS1EKSA (Philippines)
- 6x4, GVW 28,300 kg, GCM 60,000 kg, wheelbase 3,300 + 1,310 mm, 7,005 x 2,490 x 3,325 mm, E13C-UR Euro 4 12.913 L, 450 PS ISO net / 460 PS JIS gross, 1,912 / 1,952 Nm, 16-speed, 295/80R22.5, 400 L, 125 km/h