Hino 268
Show metric
EquipmentsFinder

Specification sheetIssued 20 November 2026

Hino · truck

Hino 268

Hino 268 4x2 straight truck chassis, day cab, 108 in BBC, 253 in (code T) wheelbase: engine, transmission, weights and capacities from the 2020 US Hino 268 sheet (J08E-WU / J08E-VB, 25,950 lb GVW) and overall dimensions and drawing from the 2013 Hino Canada 268 chassis sheet. The current successor is the L6 (MY28, Cummins B6.7), listed in the last group.

USAGlobal

power
260 hp
torque
660 lb-ft
Wheelbase
253 in (code T)
Hino 268, side view with dimensions (illustration)8.9 ft21.1 ft32.5 ft
Hino 268, front view (illustration)8 ft

Dimensions

Bumper to back of cab (BBC) (Day cab; 138 in on the extended cab of the L6 (MY28))
108 in
Front axle to back of cab (Estimate: BBC 2,743 (108 in) - front overhang 1,031 mm)
67.4 inest.
Front overhang (Derived: overall length 9,921 - wheelbase 6,426 - rear overhang 2,464 mm; equals the maker's tilt-centre dimension of 1,031 mm)
40.6 in
Turning radius (tyre) (253 in wheelbase; 7.68 m at 187 in)
398.4 in
Turning radius (swept) (253 in wheelbase; 8.21 m at 187 in)
419.3 in
Cab tilt angle (Tilt centre 1,031 mm (40.6 in) ahead of the front axle)
75°
Wheel cut angle
55°
Door opening angle
80°
Wheelbase range (cab to axle)
152/G 84.6 in, 175/J 107.6, 187/L 119.6, 205/M 137.6, 217/P 149.6, 235/R 167.6, 253/T 185.6, 271/V 203.6 (inches, cab to axle)

Engine

Engine model (Diesel 4-cycle, 6-cylinder in-line, water-cooled, dry cylinder liners, common rail direct injection (Denso), turbocharged and intercooled)
Hino J08E-WU (standard) or J08E-VB (optional)
Gross power (J08E-VB optional rating at 2,500 rpm (SAE gross); J08E-WU standard 230 hp (172 kW))
260 hp
Max torque (J08E-VB at 1,500 rpm (SAE gross); J08E-WU standard 520 lb-ft (705 Nm))
660 lb-ft
Displacement (Engine displacement printed as 8 L on the 2020 US sheet)
468.8 cu in
Bore
4.41 in
Stroke
5.12 in
Starter
Denso 12 V, 4.8 kW
Alternator
12 V 130 A Delco (brush) standard; 135 A brushless, 180 A and 200 A brush optional
Batteries
Two, parallel connection, 1,200 CCA (group 31) standard
Fan clutch
Bimetal thermostat sensor regulates fan speed

Transmission

Gearbox
Allison 2200HS six-speed automatic (standard); Allison 2200RDS or 2500RDS optional
Gear ratios (Allison 2200HS / 2200RDS)
1st 3.102, 2nd 1.811, 3rd 1.406, 4th 1.000, 5th 0.712, 6th 0.614, reverse 4.492
Gear ratios (Allison 2500RDS)
1st 3.512, 2nd 1.896, 3rd 1.439, 4th 1.000, 5th 0.737, 6th 0.640, reverse 5.086
Rear axle ratio
5.57 standard; 5.29 and 5.13 optional
Gradeability (260 hp, Allison 2200, 5.57 ratio) (Percent grade; 41.1 % at 5.13 and 42.7 % at 5.29 ratio. At 230 hp: 34.3 % at 5.57)
45.4 %
Top speed (2013 Canadian sheet, 11R22.5 tyres, 5.57 axle ratio)
78 mph
Gross combination weight rating (260 hp with Allison 2500RDS; 26,000 lb (11,793 kg) on the 2200 transmissions)
33,000 lb

Weight

Gross vehicle weight
25,950 lb
Kerb weight (Standard cab-chassis weight, 253 in wheelbase; 4,660 kg (10,275 lb) on the 2013 Canadian sheet)
10,220 lb
Chassis weight, front axle (253 in wheelbase (2013 Canadian sheet))
6,550 lb
Chassis weight, rear axle (253 in wheelbase (2013 Canadian sheet))
3,725 lb
Front axle capacity (Front spring 12,000 lb (5,443 kg))
10,000 lb
Rear axle capacity (Rear spring 19,000 lb)
19,000 lb

Chassis

Frame (Straight C channel, 34 in (863.6 mm) wide, 80,000 psi yield)
Ladder type; resisting bending moment (one side, no reinforcement) 1,280,000 in-lb at 152 in wheelbase, 1,031,900 in-lb at all others
Front axle
MFS-10 series reverse Elliot I-beam, oil lubricated
Front suspension
Taper-leaf springs with shock absorbers
Rear axle
MS19-14X full-floating, single reduction, single-speed hypoid gearing
Rear suspension
Semi-elliptic main leaf spring standard; Hendrickson air ride (with electric dump valve, single or dual) optional
Steering
Tilt and telescopic column, recirculating ball with integral hydraulic booster
Service brakes
Hydraulic system with disc brakes on front and rear wheels
Brake discs
Front and rear 390.5 mm diameter (15.375 in), pad area 122.3 cm2, thickness 18.8 mm
Exhaust brake
Electric-pneumatic with valve in exhaust pipe
Parking brake
Lever control with cable, internal expanding drum type
Cab
All-steel welded cab, three seats, air-suspension driver seat, air conditioning; windshield area 4,007 sq in

Tyres

Tyres (Front rib, rear all-season; 6 tyres)
11R22.5-14 standard; 255/70R22.5-16 and 295/75R22.5-14 optional
Wheels
Steel 22.5 x 8.25, 10-stud disc, powder-coated white; gray or polished aluminium optional

Service capacities

Fuel tank (Standard; optional dual 50 gal, single 70 gal or single 95 gal. 2013 Canadian sheet: 196.8 L (52 gal) aluminium)
50 US gal
DEF tank (2013 Canadian sheet: 19 L (5.02 gal))
4.7 US gal
Cooling system
6.21 US gal

L6 successor (MY28)

Successor model (The 268 / 268A became the L6 (Class 6) of the L Series)
Hino L6, MY28 (spec HSMY28LSPEC1026)
L6 engine
Cummins B6.7, 240-260 hp at 2,400 rpm, 600-660 lb-ft at 1,600 rpm
L6 gross vehicle weight rating
23,000-25,950 lb (10,433-11,771 kg)
L6 transmission
Allison six-speed automatic with neutral at stop: 2200HS standard; 2200RDS, 2500HS, 2500RDS, 3000HS optional
L6 cab
Day cab 3 seats, BBC 108 in; extended cab 5 seats, BBC 138 in
L6 wheelbases
152, 175, 187, 205, 212, 217, 235, 242, 253, 271 and 301 in
L6 frame
80,000 psi yield (1.0 million in-lb RBM)
L6 fuel and DEF tanks
Fuel: 50 gal standard, 70 or 90 gal single optional; DEF 7.4 gal
L6 axles
Meritor MFS reverse Elliot front, 8,000-12,000 lb; Meritor full-floating single-reduction rear, 17,500-19,000 lb; rear ratio 5.57 standard