Specification sheetIssued 20 November 2026
Hino · truck
Hino 268
Hino 268 4x2 straight truck chassis, day cab, 108 in BBC, 253 in (code T) wheelbase: engine, transmission, weights and capacities from the 2020 US Hino 268 sheet (J08E-WU / J08E-VB, 25,950 lb GVW) and overall dimensions and drawing from the 2013 Hino Canada 268 chassis sheet. The current successor is the L6 (MY28, Cummins B6.7), listed in the last group.
USAGlobal
- power
- 194 kW (260 hp)
- torque
- 895 Nm
- Wheelbase
- 6.426 m
2.72 m6.43 m9.92 m
2.45 mDimensions
- Bumper to back of cab (BBC) (Day cab; 138 in on the extended cab of the L6 (MY28))
- 2.743 m
- Front axle to back of cab (Estimate: BBC 2,743 (108 in) - front overhang 1,031 mm)
- 1.712 mest.
- Front overhang (Derived: overall length 9,921 - wheelbase 6,426 - rear overhang 2,464 mm; equals the maker's tilt-centre dimension of 1,031 mm)
- 1.031 m
- Turning radius (tyre) (253 in wheelbase; 7.68 m at 187 in)
- 10.12 m
- Turning radius (swept) (253 in wheelbase; 8.21 m at 187 in)
- 10.65 m
- Cab tilt angle (Tilt centre 1,031 mm (40.6 in) ahead of the front axle)
- 75°
- Wheel cut angle
- 55°
- Door opening angle
- 80°
- Wheelbase range (cab to axle)
- 152/G 84.6 in, 175/J 107.6, 187/L 119.6, 205/M 137.6, 217/P 149.6, 235/R 167.6, 253/T 185.6, 271/V 203.6 (inches, cab to axle)
Engine
- Engine model (Diesel 4-cycle, 6-cylinder in-line, water-cooled, dry cylinder liners, common rail direct injection (Denso), turbocharged and intercooled)
- Hino J08E-WU (standard) or J08E-VB (optional)
- Gross power (J08E-VB optional rating at 2,500 rpm (SAE gross); J08E-WU standard 230 hp (172 kW))
- 194 kW (260 hp)
- Max torque (J08E-VB at 1,500 rpm (SAE gross); J08E-WU standard 520 lb-ft (705 Nm))
- 895 Nm
- Displacement (Engine displacement printed as 8 L on the 2020 US sheet)
- 7.7 L
- Bore
- 112 mm
- Stroke
- 130 mm
- Starter
- Denso 12 V, 4.8 kW
- Alternator
- 12 V 130 A Delco (brush) standard; 135 A brushless, 180 A and 200 A brush optional
- Batteries
- Two, parallel connection, 1,200 CCA (group 31) standard
- Fan clutch
- Bimetal thermostat sensor regulates fan speed
Transmission
- Gearbox
- Allison 2200HS six-speed automatic (standard); Allison 2200RDS or 2500RDS optional
- Gear ratios (Allison 2200HS / 2200RDS)
- 1st 3.102, 2nd 1.811, 3rd 1.406, 4th 1.000, 5th 0.712, 6th 0.614, reverse 4.492
- Gear ratios (Allison 2500RDS)
- 1st 3.512, 2nd 1.896, 3rd 1.439, 4th 1.000, 5th 0.737, 6th 0.640, reverse 5.086
- Rear axle ratio
- 5.57 standard; 5.29 and 5.13 optional
- Gradeability (260 hp, Allison 2200, 5.57 ratio) (Percent grade; 41.1 % at 5.13 and 42.7 % at 5.29 ratio. At 230 hp: 34.3 % at 5.57)
- 45.4 %
- Top speed (2013 Canadian sheet, 11R22.5 tyres, 5.57 axle ratio)
- 125 km/h
- Gross combination weight rating (260 hp with Allison 2500RDS; 26,000 lb (11,793 kg) on the 2200 transmissions)
- 14,969 kg
Weight
- Gross vehicle weight
- 11,771 kg
- Kerb weight (Standard cab-chassis weight, 253 in wheelbase; 4,660 kg (10,275 lb) on the 2013 Canadian sheet)
- 4,636 kg
- Chassis weight, front axle (253 in wheelbase (2013 Canadian sheet))
- 2,970 kg
- Chassis weight, rear axle (253 in wheelbase (2013 Canadian sheet))
- 1,690 kg
- Front axle capacity (Front spring 12,000 lb (5,443 kg))
- 4,536 kg
- Rear axle capacity (Rear spring 19,000 lb)
- 8,618 kg
Chassis
- Frame (Straight C channel, 34 in (863.6 mm) wide, 80,000 psi yield)
- Ladder type; resisting bending moment (one side, no reinforcement) 1,280,000 in-lb at 152 in wheelbase, 1,031,900 in-lb at all others
- Front axle
- MFS-10 series reverse Elliot I-beam, oil lubricated
- Front suspension
- Taper-leaf springs with shock absorbers
- Rear axle
- MS19-14X full-floating, single reduction, single-speed hypoid gearing
- Rear suspension
- Semi-elliptic main leaf spring standard; Hendrickson air ride (with electric dump valve, single or dual) optional
- Steering
- Tilt and telescopic column, recirculating ball with integral hydraulic booster
- Service brakes
- Hydraulic system with disc brakes on front and rear wheels
- Brake discs
- Front and rear 390.5 mm diameter (15.375 in), pad area 122.3 cm2, thickness 18.8 mm
- Exhaust brake
- Electric-pneumatic with valve in exhaust pipe
- Parking brake
- Lever control with cable, internal expanding drum type
- Cab
- All-steel welded cab, three seats, air-suspension driver seat, air conditioning; windshield area 4,007 sq in
Tyres
- Tyres (Front rib, rear all-season; 6 tyres)
- 11R22.5-14 standard; 255/70R22.5-16 and 295/75R22.5-14 optional
- Wheels
- Steel 22.5 x 8.25, 10-stud disc, powder-coated white; gray or polished aluminium optional
Service capacities
- Fuel tank (Standard; optional dual 50 gal, single 70 gal or single 95 gal. 2013 Canadian sheet: 196.8 L (52 gal) aluminium)
- 189 L
- DEF tank (2013 Canadian sheet: 19 L (5.02 gal))
- 18 L
- Cooling system
- 23.5 L
L6 successor (MY28)
- Successor model (The 268 / 268A became the L6 (Class 6) of the L Series)
- Hino L6, MY28 (spec HSMY28LSPEC1026)
- L6 engine
- Cummins B6.7, 240-260 hp at 2,400 rpm, 600-660 lb-ft at 1,600 rpm
- L6 gross vehicle weight rating
- 23,000-25,950 lb (10,433-11,771 kg)
- L6 transmission
- Allison six-speed automatic with neutral at stop: 2200HS standard; 2200RDS, 2500HS, 2500RDS, 3000HS optional
- L6 cab
- Day cab 3 seats, BBC 108 in; extended cab 5 seats, BBC 138 in
- L6 wheelbases
- 152, 175, 187, 205, 212, 217, 235, 242, 253, 271 and 301 in
- L6 frame
- 80,000 psi yield (1.0 million in-lb RBM)
- L6 fuel and DEF tanks
- Fuel: 50 gal standard, 70 or 90 gal single optional; DEF 7.4 gal
- L6 axles
- Meritor MFS reverse Elliot front, 8,000-12,000 lb; Meritor full-floating single-reduction rear, 17,500-19,000 lb; rear ratio 5.57 standard