Specification sheetIssued 20 November 2026
Hamm · roller
Hamm GRW 18
Hamm GRW 18 pneumatic tyre roller (Deutz TCD 2012 L04 2V, EU Stage IIIA / Tier 3, 15,045 kg with cab) from Hamm's data sheet dated 05.13, ref. 912573 V4. Hamm now sells the successor as the HP 180i, which is not covered.
UAEGlobal
- Operating weight
- 33,169 lb
- power
- 113.9 hp
11 ft11.8 ft15.6 ft
7.1 ftDimensions
- Maximum working width
- 78.2 in
- Ground clearance, left/right (800 / 800 mm)
- 31.5 in
- Ground clearance, centre
- 13.0 in
- Turning radius (inner)
- 232.3 in
Weight
- Operating weight (with cab and ROPS, empty ballast)
- 33,169 lb
- Operating weight, no cab or ROPS (basic weight)
- 30,832 lb
- Maximum operating weight (fully ballasted)
- 61,729 lb
- Axle load, front
- 15,234 lb
- Axle load, rear
- 17,935 lb
- Load per tyre, front
- 3,808 lb
- Load per tyre, rear
- 4,484 lb
- French classification
- data 20.3 / class P0
Engine
- Engine model
- Deutz TCD 2012 L04 2V
- Cylinders
- 4
- Emissions
- EU Stage IIIA / US EPA Tier 3
- Net power (SAE J1349 at 2,300 rpm)
- 113.9 hp
- Engine power (ISO 14396) (at 2,300 rpm)
- 115.6 PS
- Rated speed
- 2,300 rpm
Performance
- Top speed (transport gear)
- 13.2 mph
- Travel speed, working gear, low range (stepless from 0)
- 3.2 mph
- Travel speed, working gear, high range (stepless from 0)
- 7.1 mph
- Travel speed, transport gear (stepless from 0)
- 13.2 mph
- Gradeability, with ballast (Hamm's sheet reads "with/no ballast: 25 / 35")
- 25%
- Gradeability, without ballast
- 35%
Drive and steering
- Drive
- Hydrodynamic drive, rear axle
- Steering
- Two-point steering, hydrostatic, steering wheel
- Steering angle, each direction
- 30°
- Oscillation angle, each direction
- 4°
Tyres
- Tyre size
- 11.00-R20 front and rear
- Number of tyres
- 4 front, 4 rear
- Tyre overlap (on both sides)
- 2.0 in
- Tyre pressure range, automatic tyre level system (option)
- 1.5 to 8 bar
Service capacities
- Fuel tank
- 52.3 US gal
- Water tank (pressure sprinkler system, manual actuation)
- 198 US gal
- Water-sprinkling system
- Pressure, manual actuation