Genie Z-60/37 FE
Show metric
EquipmentsFinder

Specification sheetIssued 20 November 2026

Genie · boom lift

Genie Z-60/37 FE

Genie Z-60/37 FE (hybrid: 18.5 kW Kubota D1105 diesel generator plus 48 V AGM battery pack, 4WD electric drive, 227 kg capacity) per Genie's Z-60 DC & Z-60 FE spec sheet of January 2020 (ANSI/CSA/EN/AS standards). The battery-only Z-60 DC is the same machine without the engine; its weight is noted.

UAEUSAGlobal

Platform height
59 ft 7 in
Working height
65 ft 7 in
Horizontal outreach
36 ft 7 in
Platform capacity
500 lb
Genie Z-60/37 FE, side view with dimensions (illustration)8.3 ft26.7 ft
Genie Z-60/37 FE, front view (illustration)8.2 ft

Dimensions

Platform length (8 ft platform)
3 ft
Platform width (8 ft platform)
8 ft
Overall height, transport position (Jib tucked under)
8 ft 7 in
Overall length, transport position (Jib tucked under)
20 ft 8 in
Tail swing (riser up) (Turntable tailswing)
1 ft 11 in
Tail swing (riser down) (Turntable tailswing)
2 ft 8 in

Performance

Working height (Platform height + 2 m (maker's convention))
65 ft 7 in
Platform height
59 ft 7 in
Horizontal outreach
36 ft 7 in
Up and over height (Up and over clearance maximum)
24 ft 3 in
Platform capacity
500 lb
Platform rotation
160°
Jib length (Vertical jib rotation 135 deg)
5 ft
Swing (Turntable rotation, non-continuous)
355°
Drive speed (stowed) (40 ft / 12.2 m in 6.8 s on the service manual test)
4.0 mph
Drive speed (raised)
0.68 mph
Gradeability
45% (4WD, stowed)
Tilt cut-out
2.5 deg front to back / 4.5 deg side to side
Turning radius (inside)
8 ft 3 in
Turning radius (outside)
18 ft 8 in
Controls
24 V DC proportional
Function speed, jib up / down (Maximum from platform controls)
13 - 17 s / 13 - 17 s
Function speed, primary boom up / down (With secondary boom fully elevated)
36 - 44 s / 36 - 44 s
Function speed, primary boom extend / retract
42 - 52 s / 34 - 42 s
Function speed, secondary boom up / down
31 - 39 s
Function speed, turntable rotate per 90 deg
21 - 27 s stowed / 35 - 42 s not stowed
Braking distance (High range on paved surface)
0.9 - 1.8 m (3 - 6 ft)

Weight

Operating weight (Z-60/37 FE; 7,548 kg for the DC model)
17,140 lb

Engine

Engine model (Drives an AC generator that charges the 48 V battery pack (FE only))
Kubota D1105-E4-GNI-1 3-cyl. diesel, Tier 4 Final
Gross power (Gross intermittent at 3,000 rpm)
24.8 hp
Displacement
68.53 cu in
Cylinders
3
Bore and stroke
78 x 78.4 mm
Engine speed
2,150 rpm low idle / 3,000 rpm high idle
Compression ratio
24:1
Drive system
34 V three-phase AC, 4WD electric
Battery pack
48 V DC, eight 6 V batteries: 415 Ah AGM (standard on FE), 390 Ah flooded lead-acid (DC)
Auxiliary power
12 V DC

Hydraulics

Function pump flow (6.6 cc and 3.3 cc per revolution)
25.7 + 12.9 L/min (6.8 + 3.4 US gpm), two-section tandem gear pump
Auxiliary pump flow (6.44 L/min with the MTE pump)
7.3 L/min (1.9 US gpm), fixed displacement gear pump
Proportional relief valve pressure
3.4 to 207 bar (50 to 3,000 psi)
Platform level relief pressure
2,800 psi
Primary boom extend relief pressure
1,250 psi
Oscillate reducing valve pressure
400 psi
Hydraulic oil
Chevron Rando HD Premium MV, ISO 32

Tyres

Tyres
355/55D625, 14 ply, rough terrain foam-filled
Overall tyre diameter (Rough terrain, low profile tyres)
3.1 ft
Tyre weight, foam-filled (Minimum)
426 lb
Wheel lug nut torque (dry) (9 lugs 5/8-18)
240 ft-lb

Service capacities

Fuel tank
17 gal
Hydraulic tank
18 gal
Hydraulic system, with tank
21 gal
Engine oil, with filter
5.4 qt
Cooling system
3.3 qt
Drive hub (each)
24 fl oz
Turntable rotation drive hub
43 fl oz