Specification sheetIssued 20 November 2026
Genie · boom lift
Genie Z-60/37 FE
Genie Z-60/37 FE (hybrid: 18.5 kW Kubota D1105 diesel generator plus 48 V AGM battery pack, 4WD electric drive, 227 kg capacity) per Genie's Z-60 DC & Z-60 FE spec sheet of January 2020 (ANSI/CSA/EN/AS standards). The battery-only Z-60 DC is the same machine without the engine; its weight is noted.
UAEUSAGlobal
- Platform height
- 18.16 m
- Working height
- 20.16 m
- Horizontal outreach
- 11.15 m
- Platform capacity
- 227 kg
2.54 m8.15 m
2.49 mDimensions
- Platform length (8 ft platform)
- 0.91 m
- Platform width (8 ft platform)
- 2.44 m
- Overall height, transport position (Jib tucked under)
- 2.62 m
- Overall length, transport position (Jib tucked under)
- 6.3 m
- Tail swing (riser up) (Turntable tailswing)
- 0.58 m
- Tail swing (riser down) (Turntable tailswing)
- 0.81 m
Performance
- Working height (Platform height + 2 m (maker's convention))
- 20.16 m
- Platform height
- 18.16 m
- Horizontal outreach
- 11.15 m
- Up and over height (Up and over clearance maximum)
- 7.39 m
- Platform capacity
- 227 kg
- Platform rotation
- 160°
- Jib length (Vertical jib rotation 135 deg)
- 1.52 m
- Swing (Turntable rotation, non-continuous)
- 355°
- Drive speed (stowed) (40 ft / 12.2 m in 6.8 s on the service manual test)
- 6.4 km/h
- Drive speed (raised)
- 1.1 km/h
- Gradeability
- 45% (4WD, stowed)
- Tilt cut-out
- 2.5 deg front to back / 4.5 deg side to side
- Turning radius (inside)
- 2.51 m
- Turning radius (outside)
- 5.69 m
- Controls
- 24 V DC proportional
- Function speed, jib up / down (Maximum from platform controls)
- 13 - 17 s / 13 - 17 s
- Function speed, primary boom up / down (With secondary boom fully elevated)
- 36 - 44 s / 36 - 44 s
- Function speed, primary boom extend / retract
- 42 - 52 s / 34 - 42 s
- Function speed, secondary boom up / down
- 31 - 39 s
- Function speed, turntable rotate per 90 deg
- 21 - 27 s stowed / 35 - 42 s not stowed
- Braking distance (High range on paved surface)
- 0.9 - 1.8 m (3 - 6 ft)
Weight
- Operating weight (Z-60/37 FE; 7,548 kg for the DC model)
- 7,775 kg
Engine
- Engine model (Drives an AC generator that charges the 48 V battery pack (FE only))
- Kubota D1105-E4-GNI-1 3-cyl. diesel, Tier 4 Final
- Gross power (Gross intermittent at 3,000 rpm)
- 18.5 kW (24.8 hp)
- Displacement
- 1.1 L
- Cylinders
- 3
- Bore and stroke
- 78 x 78.4 mm
- Engine speed
- 2,150 rpm low idle / 3,000 rpm high idle
- Compression ratio
- 24:1
- Drive system
- 34 V three-phase AC, 4WD electric
- Battery pack
- 48 V DC, eight 6 V batteries: 415 Ah AGM (standard on FE), 390 Ah flooded lead-acid (DC)
- Auxiliary power
- 12 V DC
Hydraulics
- Function pump flow (6.6 cc and 3.3 cc per revolution)
- 25.7 + 12.9 L/min (6.8 + 3.4 US gpm), two-section tandem gear pump
- Auxiliary pump flow (6.44 L/min with the MTE pump)
- 7.3 L/min (1.9 US gpm), fixed displacement gear pump
- Proportional relief valve pressure
- 3.4 to 207 bar (50 to 3,000 psi)
- Platform level relief pressure
- 193 bar
- Primary boom extend relief pressure
- 86 bar
- Oscillate reducing valve pressure
- 28 bar
- Hydraulic oil
- Chevron Rando HD Premium MV, ISO 32
Tyres
- Tyres
- 355/55D625, 14 ply, rough terrain foam-filled
- Overall tyre diameter (Rough terrain, low profile tyres)
- 0.937 m
- Tyre weight, foam-filled (Minimum)
- 193 kg
- Wheel lug nut torque (dry) (9 lugs 5/8-18)
- 325 Nm
Service capacities
- Fuel tank
- 64.4 L
- Hydraulic tank
- 68.1 L
- Hydraulic system, with tank
- 80 L
- Engine oil, with filter
- 5.1 L
- Cooling system
- 3.1 L
- Drive hub (each)
- 0.7 L
- Turntable rotation drive hub
- 1.3 L