Genie S-85 XC
Show metric
EquipmentsFinder

Specification sheetIssued 20 November 2026

Genie · boom lift

Genie S-85 XC

Genie S-85 XC (4WD, 454 kg restricted / 300 kg unrestricted capacity, Deutz TD2.9 L4 Tier 4f diesel standard) per Genie's S-80 XC & S-85 XC ANSI/CSA spec sheet of December 2019 (dealer-hosted copy). Hydraulic and engine detail is from Genie's S-80/S-85 XC and HF service manual of April 2022. The S-85 XC FE hybrid and S-85 HF are not covered.

UAEUSAGlobal

Platform height
85 ft
Working height
91 ft
Horizontal outreach
74 ft 6 in
Platform capacity
660 lb
Genie S-85 XC, side view with dimensions (illustration)9.2 ft9.4 ft40.6 ft
Genie S-85 XC, front view (illustration)8.2 ft

Dimensions

Platform length (6 ft platform)
2 ft 6 in
Platform width (6 ft platform)
6 ft
Overall length, transport position (Jib tucked under)
33 ft 8 in
Tail swing (Turntable tailswing)
5 ft 3 in

Performance

Working height (Platform height + 6 ft (US convention); 27.91 m on the EMEAR sheet)
91 ft
Platform height
85 ft
Horizontal outreach
74 ft 6 in
Below ground reach
8 ft 8 in
Platform capacity (Unrestricted)
660 lb
Platform capacity (restricted)
1,000 lb
Platform rotation
160°
Vertical jib rotation
133°
Swing (Turntable rotation, continuous)
360°
Drive speed (stowed)
3.0 mph
Drive speed (raised) (0.2 m/s, raised or extended)
0.5 mph
Gradeability
45% (stowed)
Tilt cut-out
7 deg front to back / 5 deg side to side
Turning radius (inside)
12 ft
Turning radius (outside)
21 ft 6 in
Controls
12 V DC proportional
Function speed, jib up / down (Maximum from platform controls)
25 - 35 s / 15 - 25 s
Function speed, primary boom up / down
75 - 83 s / 110 - 115 s
Function speed, primary boom extend / retract
59 - 67 s / 57 - 65 s
Function speed, turntable rotate 360 deg
95 - 103 s stowed / 210 - 250 s raised or extended
Function speed, platform rotate 160 deg
40 - 50 s
Sound pressure level (EMEAR sheet)
83 dBA at ground station, 71 dBA at platform

Weight

Operating weight (4WD, standard configuration)
39,500 lb

Engine

Engine model (Standard engine on this sheet)
Deutz TD2.9 L4 turbo diesel, Tier 4f
Net power (Net intermittent at 2,600 rpm)
74 hp
Displacement
177 cu in
Cylinders
4
Bore and stroke
92 x 110 mm
Engine speed
1,000 rpm standby / 1,500 rpm function enable / 2,500 rpm high idle
Compression ratio
17.4:1
Engine options
Perkins 404D-22T turbo diesel, Tier 4, 43.25 kW (58 hp); GM 3.0 L gas/LPG, 52.2 kW (70 hp)
Starting battery
Two 12 V DC group 31, 1,000 A; 95 A alternator
Auxiliary power
12 V DC
Electrical system (Deutz TD 2.9 L4 engine)
12 V DC, Group 31 battery; alternator 95 A @ 14 V DC

Hydraulics

Drive pump flow (Bi-directional variable piston pump, 0 to 46 cc/rev, at 2,300 rpm)
30.3 US gpm
Drive pressure (max)
3,750 psi
Charge pump flow (13.9 cc/rev gerotor pump, at 2,300 rpm; charge pressure 21.4 bar)
9 US gpm
Function pump flow (Variable piston pump, 0 to 38 cc/rev, 0 to 87 L/min at 2,300 rpm)
23 US gpm
Function pump pressure (max)
2,900 psi
System relief valve pressure (max)
3,200 psi
Primary boom extend relief pressure
2,400 psi
Brake release pressure
240 psi
Hydraulic oil
Chevron Rando HD Premium MV, ISO 32

Tyres

Tyres
18-625, 16 ply, rough terrain foam-filled
Overall tyre diameter
40.7 in
Tyre weight, foam-filled (Minimum)
622 lb
Wheel lug nut torque (dry) (11 lugs 3/4-16)
420 ft-lb

Service capacities

Fuel tank (diesel)
35 gal
Fuel tank (gas/LPG)
30 gal
Hydraulic tank
40 gal
Hydraulic system, with tank
64 gal
Engine oil, with filter
12.8 qt
Drive hub (each)
48 fl oz
Turntable rotation drive hub (1.183 L with single fill port)
43 fl oz