Specification sheetIssued 20 November 2026
Genie · boom lift
Genie S-85 XC
Genie S-85 XC (4WD, 454 kg restricted / 300 kg unrestricted capacity, Deutz TD2.9 L4 Tier 4f diesel standard) per Genie's S-80 XC & S-85 XC ANSI/CSA spec sheet of December 2019 (dealer-hosted copy). Hydraulic and engine detail is from Genie's S-80/S-85 XC and HF service manual of April 2022. The S-85 XC FE hybrid and S-85 HF are not covered.
UAEUSAGlobal
- Platform height
- 25.91 m
- Working height
- 27.74 m
- Horizontal outreach
- 22.71 m
- Platform capacity
- 300 kg
2.8 m2.85 m12.4 m
2.49 mDimensions
- Platform length (6 ft platform)
- 0.76 m
- Platform width (6 ft platform)
- 1.83 m
- Overall length, transport position (Jib tucked under)
- 10.25 m
- Tail swing (Turntable tailswing)
- 1.6 m
Performance
- Working height (Platform height + 6 ft (US convention); 27.91 m on the EMEAR sheet)
- 27.74 m
- Platform height
- 25.91 m
- Horizontal outreach
- 22.71 m
- Below ground reach
- 2.64 m
- Platform capacity (Unrestricted)
- 300 kg
- Platform capacity (restricted)
- 454 kg
- Platform rotation
- 160°
- Vertical jib rotation
- 133°
- Swing (Turntable rotation, continuous)
- 360°
- Drive speed (stowed)
- 4.8 km/h
- Drive speed (raised) (0.2 m/s, raised or extended)
- 0.7 km/h
- Gradeability
- 45% (stowed)
- Tilt cut-out
- 7 deg front to back / 5 deg side to side
- Turning radius (inside)
- 3.66 m
- Turning radius (outside)
- 6.55 m
- Controls
- 12 V DC proportional
- Function speed, jib up / down (Maximum from platform controls)
- 25 - 35 s / 15 - 25 s
- Function speed, primary boom up / down
- 75 - 83 s / 110 - 115 s
- Function speed, primary boom extend / retract
- 59 - 67 s / 57 - 65 s
- Function speed, turntable rotate 360 deg
- 95 - 103 s stowed / 210 - 250 s raised or extended
- Function speed, platform rotate 160 deg
- 40 - 50 s
- Sound pressure level (EMEAR sheet)
- 83 dBA at ground station, 71 dBA at platform
Weight
- Operating weight (4WD, standard configuration)
- 17,917 kg
Engine
- Engine model (Standard engine on this sheet)
- Deutz TD2.9 L4 turbo diesel, Tier 4f
- Net power (Net intermittent at 2,600 rpm)
- 55 kW (74 hp)
- Displacement
- 2.9 L
- Cylinders
- 4
- Bore and stroke
- 92 x 110 mm
- Engine speed
- 1,000 rpm standby / 1,500 rpm function enable / 2,500 rpm high idle
- Compression ratio
- 17.4:1
- Engine options
- Perkins 404D-22T turbo diesel, Tier 4, 43.25 kW (58 hp); GM 3.0 L gas/LPG, 52.2 kW (70 hp)
- Starting battery
- Two 12 V DC group 31, 1,000 A; 95 A alternator
- Auxiliary power
- 12 V DC
- Electrical system (Deutz TD 2.9 L4 engine)
- 12 V DC, Group 31 battery; alternator 95 A @ 14 V DC
Hydraulics
- Drive pump flow (Bi-directional variable piston pump, 0 to 46 cc/rev, at 2,300 rpm)
- 115 L/min
- Drive pressure (max)
- 259 bar
- Charge pump flow (13.9 cc/rev gerotor pump, at 2,300 rpm; charge pressure 21.4 bar)
- 34 L/min
- Function pump flow (Variable piston pump, 0 to 38 cc/rev, 0 to 87 L/min at 2,300 rpm)
- 87 L/min
- Function pump pressure (max)
- 200 bar
- System relief valve pressure (max)
- 221 bar
- Primary boom extend relief pressure
- 165 bar
- Brake release pressure
- 17 bar
- Hydraulic oil
- Chevron Rando HD Premium MV, ISO 32
Tyres
- Tyres
- 18-625, 16 ply, rough terrain foam-filled
- Overall tyre diameter
- 1.033 m
- Tyre weight, foam-filled (Minimum)
- 282 kg
- Wheel lug nut torque (dry) (11 lugs 3/4-16)
- 569 Nm
Service capacities
- Fuel tank (diesel)
- 132 L
- Fuel tank (gas/LPG)
- 114 L
- Hydraulic tank
- 150 L
- Hydraulic system, with tank
- 242 L
- Engine oil, with filter
- 12.1 L
- Drive hub (each)
- 1.4 L
- Turntable rotation drive hub (1.183 L with single fill port)
- 1.3 L