Freightliner Coronado
Show metric
EquipmentsFinder

Specification sheetIssued 20 November 2026

Freightliner · truck

Freightliner Coronado

Freightliner Coronado SD 122 as sold in Australia (2017 brochure), 6x4 set-back front axle, shown as the 58 in raised-roof sleeper; the day cab and other sleepers are listed as separate rows. Not the North American Coronado 132.

USAGlobal

power
600 hp
torque
2,050 lb-ft
Wheelbase
220.5 in
Freightliner Coronado, side view with dimensions (illustration)27 ft
Freightliner Coronado, front view (illustration)

Dimensions

Front axle to back of cab (Estimate: 58 in RR sleeper BBC 4,386 mm minus front overhang 1,196 mm)
125.6 inest.
Overall cab height (58 in XT sleeper)
137.6 in
Overall cab height (48 in sleeper)
125.8 in
Overall cab height (34 in sleeper)
125.8 in
Overall cab height (day cab)
117.4 in
Bumper to back of cab (day cab)
123.5 in
Bumper to back of cab (34 in sleeper)
149.1 in
Bumper to back of cab (48 in sleeper)
162.8 in
Wheelbase (day cab) (overall length 7,021 mm)
173.2 in
Wheelbase (34 in sleeper) (overall length 7,621 mm)
196.9 in
Wheelbase (48 in sleeper) (overall length 8,071 mm)
214.6 in
Rear overhang (straight truck) (trucks have a straight frame end)
65.0 in
Windshield angle (two-piece curved windshield)
24°

Engine

Engine model
Detroit DD15 or Cummins ISX/Signature
Gross power (Cummins ISX top rating; Detroit DD15 goes to 560 hp (418 kW))
600 hp
Max torque (Cummins ISX 600 hp rating)
2,050 lb-ft
Displacement (From the Western Star 4900 tech sheet (DD15 14.8 L; Cummins X15, the ISX15 successor, 15.0 L))
14.8 L (Detroit DD15); 15 L (Cummins ISX15)
Power (Detroit DD15)
500 hp (373 kW), 530 hp (395 kW), 560 hp (418 kW); upgradeable to 560 hp with no engine hardware change
Torque (Detroit DD15)
1,850 lb-ft (2,508 Nm) on all three ratings
Power (Cummins ISX)
485 hp (362 kW), 500 hp (373 kW), 525 hp (392 kW), 550 hp (410 kW), 600 hp (448 kW); upgradeable to 600 hp with no engine hardware change
Torque (Cummins ISX)
1,850 lb-ft (2,508 Nm); 2,050 lb-ft (2,779 Nm) with the 600 hp rating
Radiator
Aluminium, 1,700 in2 (10,968 cm2); Borg Warner viscous fan clutch
Air intake
Donaldson PowerCore air filter with dual pre-filters
Exhaust
Horizontal aftertreatment device with vertical outlet
Alternator
12 V Leece-Neville, 185 A brushless
Batteries
4 x 12 V AGM, 2,920 CCA; box mounted between the rails or single outboard on the LH frame
Clutch
Eaton 15-1/2 in twin ceramic disc, manual or self-adjusting; aluminium clutch housing

Transmission

Driveline
Meritor RPL 25SD with RPL20 inter-axle drive shafts
Differential locks
Driver-controlled differential locks standard
Gearbox
Eaton manual or Eaton UltraShift automated manual with SmartShift paddle control, to suit engine and GCM

Weight

Gross vehicle mass (6x4, standard equipment, on-highway)
57,320 lb
Gross combination mass (B-double) (standard GCM; higher GCM with approved TAD)
176,370 lb
Gross combination mass (road train) (standard GCM)
233,690 lb
Max gross combination mass (rating up to 140 tonne GCM)
308,647 lb
Tare weight (brochure minimum) ("from just 7,857 kgs")
17,322 lb
Steer axle capacity (Daimler DA-F 16.0-5 or Meritor MFS16-122A with 16K parabolic taper leaf springs; Meritor FG941 6,624 kg with 14K springs)
16,000 lb
Rear tandem axle capacity (tandem rear axles rated up to 23,580 kg)
51,985 lb
Rear axle (max GCM)
Meritor RT46-160GP 106 t; RT50-160GP 131 t; RT52-185GP 140 t; RT52-380GP 155 t
Kerb weight (Tare, day cab at 4,400 mm wheelbase (4,543 kg front, 3,493 kg rear); all fluids, no fuel or driver)
17,716 lb

Chassis

Frame section
8.7 x 88.9 x 258.8 mm, 8.7 x 88.9 x 277.8 mm or 11.1 x 90.5 x 282.6 mm; 6.35 mm C-channel insert, partial or full length; yield strength 827 MPa; Huckspin fasteners
Rear suspension
Freightliner AirLiner 46K air bag (106 t GCM); Hendrickson PRIMAAX EX 460 air bag (140 t); Freightliner TufTrac 46K steel spring (140 t); Neway AD-246 air bag (140 t); dual levelling valves
Front suspension
16K or 14K parabolic taper leaf springs with TRW THP60 steering box (RCH45 on the 16K axles)
Brakes
Meritor S-cam with automatic slack adjusters and Steelite X30 drums, or Bendix disc; Wabco ABS; traction control with or without roll stability control
Cab
Lightweight aluminium cab with Henrob self-piercing rivets, ECE R29 crash standard; day cab, 34 in and 48 in mid-roof, 58 in XT and 58 in raised-roof sleepers
Hood
Fibreglass bonnet that tilts almost 90 degrees; lift effort about 20 kg
Front underrun protection
FUPD compliant with ADR 84/00

Tyres

Steer tyres
Michelin X Multiway 3D XZE 295/80R22.5 or Michelin XZA2 Energy 315/80R22.5
Drive tyres
Michelin X Multi D 11R22.5 or Michelin XDE M/S 11R22.5
Wheels
Alcoa 8.25 x 22.5 or 9.00 x 22.5 (steer only) disc, Dura-Bright, 12.25 x 22.5 aluminium (285 mm PCD), or 8.25 x 22.5 steel (285 mm PCD)
Tyres
Steer: Michelin X Multiway 3D XZE 295/80R22.5 or XZA2 Energy 315/80R22.5; drive: Michelin X Multi D or XDE M/S 11R22.5

Service capacities

Fuel tank (25 in diameter tanks from 227 L; hydraulic oil and split hydraulic-fuel tanks available)
60 US gal
Windshield washer reservoir
2.1 US gal