Specification sheetIssued 20 November 2026
Freightliner · truck
Freightliner Coronado
Freightliner Coronado SD 122 as sold in Australia (2017 brochure), 6x4 set-back front axle, shown as the 58 in raised-roof sleeper; the day cab and other sleepers are listed as separate rows. Not the North American Coronado 132.
USAGlobal
- power
- 448 kW (600 hp)
- torque
- 2,779 Nm
- Wheelbase
- 5.6 m
8.22 m
Dimensions
- Front axle to back of cab (Estimate: 58 in RR sleeper BBC 4,386 mm minus front overhang 1,196 mm)
- 3.19 mest.
- Overall cab height (58 in XT sleeper)
- 3.496 m
- Overall cab height (48 in sleeper)
- 3.195 m
- Overall cab height (34 in sleeper)
- 3.195 m
- Overall cab height (day cab)
- 2.981 m
- Bumper to back of cab (day cab)
- 3.136 m
- Bumper to back of cab (34 in sleeper)
- 3.786 m
- Bumper to back of cab (48 in sleeper)
- 4.136 m
- Wheelbase (day cab) (overall length 7,021 mm)
- 4.4 m
- Wheelbase (34 in sleeper) (overall length 7,621 mm)
- 5 m
- Wheelbase (48 in sleeper) (overall length 8,071 mm)
- 5.45 m
- Rear overhang (straight truck) (trucks have a straight frame end)
- 1.65 m
- Windshield angle (two-piece curved windshield)
- 24°
Engine
- Engine model
- Detroit DD15 or Cummins ISX/Signature
- Gross power (Cummins ISX top rating; Detroit DD15 goes to 560 hp (418 kW))
- 448 kW (600 hp)
- Max torque (Cummins ISX 600 hp rating)
- 2,779 Nm
- Displacement (From the Western Star 4900 tech sheet (DD15 14.8 L; Cummins X15, the ISX15 successor, 15.0 L))
- 14.8 L (Detroit DD15); 15 L (Cummins ISX15)
- Power (Detroit DD15)
- 500 hp (373 kW), 530 hp (395 kW), 560 hp (418 kW); upgradeable to 560 hp with no engine hardware change
- Torque (Detroit DD15)
- 1,850 lb-ft (2,508 Nm) on all three ratings
- Power (Cummins ISX)
- 485 hp (362 kW), 500 hp (373 kW), 525 hp (392 kW), 550 hp (410 kW), 600 hp (448 kW); upgradeable to 600 hp with no engine hardware change
- Torque (Cummins ISX)
- 1,850 lb-ft (2,508 Nm); 2,050 lb-ft (2,779 Nm) with the 600 hp rating
- Radiator
- Aluminium, 1,700 in2 (10,968 cm2); Borg Warner viscous fan clutch
- Air intake
- Donaldson PowerCore air filter with dual pre-filters
- Exhaust
- Horizontal aftertreatment device with vertical outlet
- Alternator
- 12 V Leece-Neville, 185 A brushless
- Batteries
- 4 x 12 V AGM, 2,920 CCA; box mounted between the rails or single outboard on the LH frame
- Clutch
- Eaton 15-1/2 in twin ceramic disc, manual or self-adjusting; aluminium clutch housing
Transmission
- Driveline
- Meritor RPL 25SD with RPL20 inter-axle drive shafts
- Differential locks
- Driver-controlled differential locks standard
- Gearbox
- Eaton manual or Eaton UltraShift automated manual with SmartShift paddle control, to suit engine and GCM
Weight
- Gross vehicle mass (6x4, standard equipment, on-highway)
- 26,000 kg
- Gross combination mass (B-double) (standard GCM; higher GCM with approved TAD)
- 80,000 kg
- Gross combination mass (road train) (standard GCM)
- 106,000 kg
- Max gross combination mass (rating up to 140 tonne GCM)
- 140,000 kg
- Tare weight (brochure minimum) ("from just 7,857 kgs")
- 7,857 kg
- Steer axle capacity (Daimler DA-F 16.0-5 or Meritor MFS16-122A with 16K parabolic taper leaf springs; Meritor FG941 6,624 kg with 14K springs)
- 7,258 kg
- Rear tandem axle capacity (tandem rear axles rated up to 23,580 kg)
- 23,580 kg
- Rear axle (max GCM)
- Meritor RT46-160GP 106 t; RT50-160GP 131 t; RT52-185GP 140 t; RT52-380GP 155 t
- Kerb weight (Tare, day cab at 4,400 mm wheelbase (4,543 kg front, 3,493 kg rear); all fluids, no fuel or driver)
- 8,036 kg
Chassis
- Frame section
- 8.7 x 88.9 x 258.8 mm, 8.7 x 88.9 x 277.8 mm or 11.1 x 90.5 x 282.6 mm; 6.35 mm C-channel insert, partial or full length; yield strength 827 MPa; Huckspin fasteners
- Rear suspension
- Freightliner AirLiner 46K air bag (106 t GCM); Hendrickson PRIMAAX EX 460 air bag (140 t); Freightliner TufTrac 46K steel spring (140 t); Neway AD-246 air bag (140 t); dual levelling valves
- Front suspension
- 16K or 14K parabolic taper leaf springs with TRW THP60 steering box (RCH45 on the 16K axles)
- Brakes
- Meritor S-cam with automatic slack adjusters and Steelite X30 drums, or Bendix disc; Wabco ABS; traction control with or without roll stability control
- Cab
- Lightweight aluminium cab with Henrob self-piercing rivets, ECE R29 crash standard; day cab, 34 in and 48 in mid-roof, 58 in XT and 58 in raised-roof sleepers
- Hood
- Fibreglass bonnet that tilts almost 90 degrees; lift effort about 20 kg
- Front underrun protection
- FUPD compliant with ADR 84/00
Tyres
- Steer tyres
- Michelin X Multiway 3D XZE 295/80R22.5 or Michelin XZA2 Energy 315/80R22.5
- Drive tyres
- Michelin X Multi D 11R22.5 or Michelin XDE M/S 11R22.5
- Wheels
- Alcoa 8.25 x 22.5 or 9.00 x 22.5 (steer only) disc, Dura-Bright, 12.25 x 22.5 aluminium (285 mm PCD), or 8.25 x 22.5 steel (285 mm PCD)
- Tyres
- Steer: Michelin X Multiway 3D XZE 295/80R22.5 or XZA2 Energy 315/80R22.5; drive: Michelin X Multi D or XDE M/S 11R22.5
Service capacities
- Fuel tank (25 in diameter tanks from 227 L; hydraulic oil and split hydraulic-fuel tanks available)
- 227 L
- Windshield washer reservoir
- 8 L