Specification sheetIssued 4 November 2026
Cat · wheel loader
Cat 930K
Cat 930K for Africa / Middle East and other non-Tier-4 regions (C7.1, U.S. EPA Tier 3 / EU Stage IIIA / Brazil MAR-1 equivalent), standard lift, 2.5 m³ GP bucket - the build Al-Bahar sells in the UAE; the newer Tier 4 / Stage V 930 (no suffix) is not covered.
UAEUSAGlobal
- Bucket capacity
- 3.27 yd³
- power
- 156 hp
- Operating weight
- 28,945 lb
- Static tipping load (full turn)
- 17,353 lb
- Height to top of cab
- 10'11"
- Height to top of beacon
- 12'2"
- Ground to axle centre
- 2'3"
- Ground clearance
- 1'4"
- Overall length (bucket on ground)
- 25'0"
- Rear axle to rear bumper
- 6'6"
- Hitch to front axle
- 4'11"
- Wheelbase
- 9'10"
- Dump clearance at max lift
- 9'1"
- Load-over height
- 10'11"
- Clearance, level bucket at max lift
- 11'9"
- Hinge pin height (max lift)
- 12'10"
- Overall height, bucket at max lift
- 17'2"
- Reach at max lift
- 3'8"
- Carry height, bucket pin
- 1'4"
- Dig depth
- 3.9"
- Bucket width
- 8'4"
- Tread width
- 6'4"
- Width over tyres
- 8'4"
- Turning radius (outside of bucket)
- 19'7"
- Turning radius (outside of tyres)
- 17'9"
- Turning radius (inside of tyres)
- 9'4"
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
20
19
21
22
Angles
- 23Rack angle at full lift
- 54°
- 24Dump angle at full lift
- 48°
- 25Rack angle at carry
- 44°
- 26Departure angle
- 33°
- 27Articulation angle
- 40°
Weight
- Operating weight
- 28,945 lb
Engine
- Engine model
- Cat C7.1
- Emissions
- U.S. EPA Tier 3 / EU Stage IIIA / Brazil MAR-1 equivalent
- Displacement
- 427 in3
- Gross power
- 160 hp
- Gross power (Standard Mode)
- 152 hp
- Net power (SAE J1349, Performance Mode at 1,800 rpm)
- 156 hp
- Net power (Standard Mode) (SAE J1349, Standard Mode at 1,600 rpm)
- 148 hp
- Max torque (Gross, ISO 14396, Performance Mode)
- 580 lbf·ft
- Max torque (net) (Net, SAE J1349, Performance Mode)
- 555 lbf·ft
Performance
- Bucket capacity
- 3.27 yd³
- Bucket capacity range (general purpose)
- 2.1-2.7 m³ (2.7-3.5 yd³)
- Bucket capacity range (light material)
- 3.1-5.0 m³ (4.0-6.5 yd³)
- Static tipping load (straight) (ISO 14397-1; standard lift)
- 20,287 lb
- Static tipping load (full turn) (ISO 14397-1; standard lift)
- 17,353 lb
- Breakout force
- 25,327 lbf
- Top speed (Range 4, forward and reverse)
- 25 mph
Hydraulics
- Pump flow (Implement pump, maximum flow)
- 50 gal/min
- Max pressure
- 3,626 psi
- Tilt cylinder relief pressure
- 4,061 psi
- Steering pump flow (Maximum flow)
- 34 gal/min
- Steering pump pressure
- 3,500 psi
Transmission
- Transmission
- Hydrostatic, 4 speed ranges, electronic control
- Range 1
- 8 mph
- Range 2
- 8 mph
- Range 3
- 17 mph
- Range 4
- 25 mph
Tyres
- Tyres
- 20.5 R25 radial (L-3)
Service capacities
- Fuel tank
- 51.5 US gal
- Cooling system
- 8.5 US gal
- Engine crankcase
- 5.2 US gal
- Transmission (Gearbox)
- 2.2 US gal
- Axles, front
- 6.9 US gal
- Axles, rear
- 6.6 US gal
- Hydraulic system, with tank
- 43.6 US gal
- Hydraulic tank
- 23.8 US gal
Service intervals
- Engine oil and filter (Cat DEO-ULS)
- 500 hours
- Fuel filters (Primary and secondary)
- 500 hours
- Engine air filter (Primary and secondary elements)
- 1,000 hours
- Hydraulic oil filter
- 2,000 hours
- Transmission oil and filter (Cat TDTO)
- 2,000 hours
- Differential oil (front and rear)
- 2,000 hours
- Hydraulic oil (Cat HYDO Advanced)
- 6,000 hours
- Coolant extender (Cat ELC Extender)
- 6,000 hours
- Coolant (Cat ELC)
- 12,000 hours