Specification sheetIssued 20 November 2026
Cat · wheel loader
Cat 906
Current-generation Cat 906 compact wheel loader (C2.8, 2022 on; Tier 3 / Stage IIIA-equivalent engine as sold in the Gulf), standard lift, cab, 0.95 m3 GP bucket on the horizontal-pin coupler, 405/70 R18 tyres; global 906/907/908 brochure, as Al-Bahar's catalogue still lists only the previous 906K.
UAEUSAGlobal
- Bucket capacity
- 1.2 yd3
- power
- 72.9 hp
- Operating weight
- 12,628 lb
- Static tipping load (full turn)
- 8,534 lb
8 ft7.1 ft17.6 ft
5.6 ftWeight
- Operating weight (Headline figure)
- 12,628 lb
- Operating weight (with GP bucket)
- 12,667 lb
Engine
- Engine model
- Cat C2.8
- Emissions
- U.S. EPA Tier 3 / EU Stage IIIA equivalent (Tier 4 Final / Stage V version also built)
- Displacement
- 171 in3
- Gross power
- 75.0 hp
- Net power
- 72.9 hp
- Max torque
- 222 lb-ft
- Bore x stroke
- 90 x 110 mm
- Cylinders (Estimate: 90 x 110 mm bore x stroke and 2.8 L on this brochure give 4 cylinders)
- 4est.
Performance
- Bucket capacity
- 1.2 yd3
- Bucket capacity range
- 0.75-1.55 m3 (1.0-2.0 yd3)
- Static tipping load (full turn) (ISO 14397-1, 0.95 m3 GP bucket, HPL-V)
- 8,534 lb
- Static tipping load (straight) (ISO 14397-1, 0.95 m3 GP bucket, HPL-V)
- 9,914 lb
- Breakout force (0.95 m3 GP bucket, HPL-V)
- 11,233 lb
- Top speed (Standard 2-range transmission)
- 12 mph
- Top speed (high-speed transmission)
- 25 mph
- Hydraulic cycle times (At 2550 rpm)
- Lift 5.0 s, dump 1.6 s, rack back 2.2 s, float down 2.8 s; total 11.6 s
Hydraulics
- Pump flow (Implement pump, at 2550 rpm)
- 21 gal/min
- Max pressure (Implement pump, 23 500 kPa)
- 3,408 psi
Transmission
- Transmission
- Hydrostatic, two speed, with inching (standard); 3-speed high-speed "shift on the go" optional
- Axles
- Fixed front and rear, optional locking differentials; hitch oscillation +/-11 deg
Tyres
- Tyres
- 405/70 R18 Goodyear Powerload
Service capacities
- Fuel tank (Including filter and lines)
- 18.5 gal
- Cooling system (1 L less with canopy)
- 3.2 gal
- Engine crankcase (Total engine capacity 9.8 L)
- 2.3 gal
- Hydraulic system, with tank
- 17.8 gal
- Hydraulic tank
- 11.8 gal
- Front axle (Centre/hub; hub separate fill 0.8 L)
- 2.3 gal
- Rear axle (Centre/hub; hub separate fill 0.8 L)
- 2.3 gal