Specification sheetIssued 20 November 2026
Cat · wheel loader
Cat 906
Current-generation Cat 906 compact wheel loader (C2.8, 2022 on; Tier 3 / Stage IIIA-equivalent engine as sold in the Gulf), standard lift, cab, 0.95 m3 GP bucket on the horizontal-pin coupler, 405/70 R18 tyres; global 906/907/908 brochure, as Al-Bahar's catalogue still lists only the previous 906K.
UAEUSAGlobal
- Bucket capacity
- 0.95 m³
- power
- 54.4 kW (72.9 hp)
- Operating weight
- 5,730 kg
- Static tipping load (full turn)
- 3,871 kg
2.44 m2.17 m5.37 m
1.71 mWeight
- Operating weight (Headline figure)
- 5,730 kg
- Operating weight (with GP bucket)
- 5,746 kg
Engine
- Engine model
- Cat C2.8
- Emissions
- U.S. EPA Tier 3 / EU Stage IIIA equivalent (Tier 4 Final / Stage V version also built)
- Displacement
- 2.8 L
- Gross power
- 56 kW (75.0 hp)
- Net power
- 54.4 kW (72.9 hp)
- Max torque
- 301 Nm
- Bore x stroke
- 90 x 110 mm
- Cylinders (Estimate: 90 x 110 mm bore x stroke and 2.8 L on this brochure give 4 cylinders)
- 4est.
Performance
- Bucket capacity
- 0.95 m³
- Bucket capacity range
- 0.75-1.55 m3 (1.0-2.0 yd3)
- Static tipping load (full turn) (ISO 14397-1, 0.95 m3 GP bucket, HPL-V)
- 3,871 kg
- Static tipping load (straight) (ISO 14397-1, 0.95 m3 GP bucket, HPL-V)
- 4,497 kg
- Breakout force (0.95 m3 GP bucket, HPL-V)
- 5,095 kgf
- Top speed (Standard 2-range transmission)
- 20 km/h
- Top speed (high-speed transmission)
- 40 km/h
- Hydraulic cycle times (At 2550 rpm)
- Lift 5.0 s, dump 1.6 s, rack back 2.2 s, float down 2.8 s; total 11.6 s
Hydraulics
- Pump flow (Implement pump, at 2550 rpm)
- 80 L/min
- Max pressure (Implement pump, 23 500 kPa)
- 235 bar
Transmission
- Transmission
- Hydrostatic, two speed, with inching (standard); 3-speed high-speed "shift on the go" optional
- Axles
- Fixed front and rear, optional locking differentials; hitch oscillation +/-11 deg
Tyres
- Tyres
- 405/70 R18 Goodyear Powerload
Service capacities
- Fuel tank (Including filter and lines)
- 70 L
- Cooling system (1 L less with canopy)
- 12 L
- Engine crankcase (Total engine capacity 9.8 L)
- 8.8 L
- Hydraulic system, with tank
- 67.5 L
- Hydraulic tank
- 44.6 L
- Front axle (Centre/hub; hub separate fill 0.8 L)
- 8.8 L
- Rear axle (Centre/hub; hub separate fill 0.8 L)
- 8.8 L