Cat 265
Show metric
EquipmentsFinder

Specification sheetIssued 20 November 2026

Cat · compact track loader

Cat 265

Cat 265 compact track loader for North America and Europe (Cat C2.8TA turbo after-cooled, 2,036 mm low-profile bucket, 450 mm tracks, open canopy, standard-flow hydraulics) per Cat specalog AEHQ8451-04 (10-2025); it replaced the 279D3. Dimension numbers are those on the numbered drawing on that sheet; overall length is the length with the bucket on the ground.

USAGlobal

Rated operating capacity
2,823 lb
power
73 hp
Operating weight
10,492 lb
Cat 265, side view with dimensions (illustration)6.9 ft11.7 ft
Cat 265, front view (illustration)6.3 ft

Performance

Rated operating capacity (35% tipping load; +34 kg with enclosed cab)
2,823 lb
Rated operating capacity, 50% tipping load
4,033 lb
Rated operating capacity with counterweight (At 35% tipping load, optional external counterweight)
2,961 lb
Tipping load (+97 kg with enclosed cab, +224 kg with counterweight)
8,066 lb
Breakout force, lift cylinder
6,739 lb
Breakout force, tilt cylinder
8,680 lb
Top speed (Two-speed; 8 km/h (5 mph) one-speed)
8.1 mph
Lift type
Vertical lift

Weight

Operating weight (With 2,036 mm low-profile bucket, 450 mm tracks, open canopy, full fluids, 75 kg operator)
10,492 lb
Operating weight change, enclosed cab (Added to operating weight)
+181 lb
Operating weight change, counterweight (Added to operating weight)
+276 lb
Ground pressure (450 mm tracks)
28.8 kPa

Engine

Engine model
Cat C2.8TA (turbo after-cooled)
Emissions
U.S. EPA Tier 4 Final and EU Stage V
Displacement
171 in3
Gross power (SAE J1995)
74 hp
Net power (ISO 9249; SAE J1349 54.9 kW (74 hp))
73 hp
Max torque (At 1,360 rpm, SAE J1995)
280 lbf-ft
Alternator
85 A
Cylinders (Estimate: Cat C2.8 (90 x 110 mm, 2.8 L per Cat's 906-908 brochure) is a 4-cylinder engine)
4est.

Hydraulics

Pump flow (Standard flow, loader hydraulic flow)
23 gal/min
Pump flow (high flow)
30 gal/min
Pump flow (high flow XPS)
34 gal/min
Max pressure (Standard flow and High Flow; loader hydraulic pressure 24,130 kPa)
3,500 psi
Max pressure (high flow XPS) (Loader hydraulic pressure 28,000 kPa)
4,061 psi
Hydraulic power, standard flow (Calculated)
46.4 hp
Hydraulic power, high flow (Calculated)
60.9 hp
Hydraulic power, high flow XPS (Calculated)
80.7 hp
Hydraulic tank
6.9 gal
Hydraulic system, with tank
9.7 gal

Undercarriage

Track width (Steel-embedded rubber track, bar or block tread)
17.7 in
Suspension
Torsion suspension, 4 independent torsion axles
Ground contact area (450 mm tracks)
1.62 m2
Idlers
Dual-flange front / single-flange rear, or triple-flange front and rear

Cab

ROPS
ISO 3471:2008
FOPS
ISO 3449:2005 Level I; Level II optional

Service capacities

Fuel tank
31.9 gal
Cooling system
2.8 gal
Engine oil (Crankcase)
2.1 gal