Specification sheetIssued 20 November 2026
Cat · compact track loader
Cat 265
Cat 265 compact track loader for North America and Europe (Cat C2.8TA turbo after-cooled, 2,036 mm low-profile bucket, 450 mm tracks, open canopy, standard-flow hydraulics) per Cat specalog AEHQ8451-04 (10-2025); it replaced the 279D3. Dimension numbers are those on the numbered drawing on that sheet; overall length is the length with the bucket on the ground.
USAGlobal
- Rated operating capacity
- 1,280 kg
- power
- 54.4 kW (73 hp)
- Operating weight
- 4,759 kg
2.12 m3.58 m
1.93 mPerformance
- Rated operating capacity (35% tipping load; +34 kg with enclosed cab)
- 1,280 kg
- Rated operating capacity, 50% tipping load
- 1,829 kg
- Rated operating capacity with counterweight (At 35% tipping load, optional external counterweight)
- 1,342 kg
- Tipping load (+97 kg with enclosed cab, +224 kg with counterweight)
- 3,659 kg
- Breakout force, lift cylinder
- 3,057 kgf
- Breakout force, tilt cylinder
- 3,937 kgf
- Top speed (Two-speed; 8 km/h (5 mph) one-speed)
- 13 km/h
- Lift type
- Vertical lift
Weight
- Operating weight (With 2,036 mm low-profile bucket, 450 mm tracks, open canopy, full fluids, 75 kg operator)
- 4,759 kg
- Operating weight change, enclosed cab (Added to operating weight)
- 82 kg
- Operating weight change, counterweight (Added to operating weight)
- 125 kg
- Ground pressure (450 mm tracks)
- 28.8 kPa
Engine
- Engine model
- Cat C2.8TA (turbo after-cooled)
- Emissions
- U.S. EPA Tier 4 Final and EU Stage V
- Displacement
- 2.8 L
- Gross power (SAE J1995)
- 55.2 kW (74 hp)
- Net power (ISO 9249; SAE J1349 54.9 kW (74 hp))
- 54.4 kW (73 hp)
- Max torque (At 1,360 rpm, SAE J1995)
- 380 Nm
- Alternator
- 85 A
- Cylinders (Estimate: Cat C2.8 (90 x 110 mm, 2.8 L per Cat's 906-908 brochure) is a 4-cylinder engine)
- 4est.
Hydraulics
- Pump flow (Standard flow, loader hydraulic flow)
- 86 L/min
- Pump flow (high flow)
- 113 L/min
- Pump flow (high flow XPS)
- 129 L/min
- Max pressure (Standard flow and High Flow; loader hydraulic pressure 24,130 kPa)
- 241 bar
- Max pressure (high flow XPS) (Loader hydraulic pressure 28,000 kPa)
- 280 bar
- Hydraulic power, standard flow (Calculated)
- 34.6 kW (46.4 hp)
- Hydraulic power, high flow (Calculated)
- 45.4 kW (60.9 hp)
- Hydraulic power, high flow XPS (Calculated)
- 60.2 kW (80.7 hp)
- Hydraulic tank
- 26 L
- Hydraulic system, with tank
- 36.8 L
Undercarriage
- Track width (Steel-embedded rubber track, bar or block tread)
- 0.45 m
- Suspension
- Torsion suspension, 4 independent torsion axles
- Ground contact area (450 mm tracks)
- 1.62 m2
- Idlers
- Dual-flange front / single-flange rear, or triple-flange front and rear
Cab
- ROPS
- ISO 3471:2008
- FOPS
- ISO 3449:2005 Level I; Level II optional
Service capacities
- Fuel tank
- 120.7 L
- Cooling system
- 10.7 L
- Engine oil (Crankcase)
- 8 L