Specification sheetIssued 20 November 2026
Cat · skid steer loader
Cat 246
Cat 246D3 (D3 series, Cat C3.3B DIT turbo engine) from spec sheet AEHQ8223 (08-2019) for South America, Africa-Middle East, CIS and APD-LRC regions, linked by Al-Bahar (Cat dealer, UAE); one-speed, OROPS, standard-flow build with 1676 mm low profile bucket.
UAEUSAGlobal
- Rated operating capacity
- 2,200 lb
- power
- 71.8 hp
- Operating weight
- 7,478 lb
6.9 ft4.1 ft12.2 ft
5.5 ftDimensions
- Width with standard bucket (Bucket width from the sheet footnote: 1676 mm (68 in) low profile bucket.)
- 66 in
Weight
- Operating weight
- 7,478 lb
Performance
- Rated operating capacity
- 2,200 lb
- Rated operating capacity with optional counterweight
- 2,410 lb
- Tipping load
- 4,400 lb
- Tilt breakout force
- 7,355 lb
- Top speed (one speed, forward or reverse)
- 7.7 mph
- Top speed (two-speed option) (forward or reverse)
- 11.0 mph
Engine
- Engine model
- Cat C3.3B DIT (turbo)
- Cylinders (Not printed in the sheet; follows from the printed displacement, bore and stroke (4 x 0.25*pi*bore^2*stroke).)
- 4
- Displacement
- 203 in³
- Bore
- 3.7 in
- Stroke
- 4.7 in
- Gross power (SAE J1995)
- 74.3 hp
- Net power (SAE 1349)
- 71.8 hp
- Net power (ISO 9249) (ISO 9249)
- 72.6 hp
- Max torque (peak torque at 1,600 rpm (SAE J1995))
- 195 lbf-ft
- Max torque speed
- 1,600 rpm
Hydraulics
- Pump flow (standard flow, loader hydraulic flow)
- 23 gal/min
- Max pressure
- 3,335 psi
- Hydraulic power (standard flow, calculated)
- 44 hp
- Pump flow (high flow) (High Flow XPS, maximum loader hydraulic flow)
- 32 gal/min
- Max pressure (high flow)
- 4,061 psi
- Hydraulic power (high flow) (High Flow XPS, calculated)
- 76 hp
Transmission
- Transmission
- Hydrostatic, four-wheel chain drive
Tyres
- Tyres
- Cat PC 12 × 16.5
Service capacities
- Fuel tank
- 27.7 gal
- Engine oil, with filter
- 3.0 gal
- Hydraulic tank
- 10.3 gal
- Hydraulic system, with tank
- 13.7 gal
- Cooling system
- 3.7 gal
- Chaincase (Each side (two chain boxes).)
- 3.3 gal
Cab
- ROPS
- ISO 3471:2008
- FOPS
- ISO 3449:2005 Level I
- Sound level, inside cab (ISO 6396:2008)
- 81 dB(A)
- Sound level, outside cab (2000/14/EC)
- 101 dB(A)
Service intervals
- Engine oil and filter
- 500 hours
- Air filter, primary and secondary
- 500 hours
- Fuel filters
- 500 hours
- Hydraulic/hydrostatic filter
- 1,000 hours
- Chaincase oil
- 1,000 hours
- Hydraulic oil
- 3,000 hours