Specification sheetIssued 20 November 2026
Case · compact track loader
Case TV450B
Case TV450B compact track loader (FPT F5B 3.4 L, Tier 4 Final, vertical lift, 17.7 in rubber tracks, open ROPS canopy, 78 in foundry/excavating bucket) per the Case North America specification sheet CCE202001TV450B (2020), with the dimension letters of its drawing.
USAGlobal
- Rated operating capacity
- 3,150 lb
- power
- 84 hp
- Operating weight
- 10,610 lb
6.7 ft12 ft
6.4 ftPerformance
- Rated operating capacity (35% of tipping load)
- 3,150 lb
- Rated operating capacity (50% tipping load)
- 4,500 lb
- Rated operating capacity with counterweight (50% of tipping load, with additional counterweight)
- 4,700 lb
- Tipping load (measured with the 78 in foundry/excavating bucket)
- 9,000 lb
- Breakout force (bucket cylinders, at 217 bar)
- 9,188 lb
- Breakout force (lift arm) (lift cylinders, hydraulic limit)
- 7,773 lb
- Top speed (2-speed, high range)
- 8.0 mph
- Travel speed (low)
- 5.5 mph
- Traction force (tractive effort)
- 7,414 lb
- Lift path
- Vertical
- Raise lift arms (cycle time)
- 5.1 s
- Lower lift arms (cycle time)
- 3.5 s
- Bucket dump (cycle time)
- 2.7 s
- Bucket rollback cycle (cycle time)
- 2.0 s
Weight
- Operating weight (open cab, 165 lb operator, 78 in heavy-duty bucket, full fuel)
- 10,610 lb
- Shipping weight
- 10,267 lb
Engine
- Engine model (turbocharged, high-pressure common rail with SCR)
- FPT F5B FL413 D*C001
- Emissions (the Case Europe brochure lists Stage V with the FPT F5M)
- EPA Tier 4 Final
- Cylinders
- 4
- Displacement
- 207 in3
- Bore
- 3.9 in
- Stroke
- 4.3 in
- Gross power (SAE J1349 at 2,500 rpm)
- 90 hp
- Net power (SAE J1349 at 2,500 rpm)
- 84 hp
- Max torque (at 1,400 rpm)
- 282 lb-ft
Hydraulics
- Pump flow (standard auxiliary flow at rated engine rpm)
- 24.2 gal/min
- Pump flow (high flow) (optional, combined)
- 39.5 gal/min
- Pump flow (enhanced high flow) (optional, at 276 bar)
- 35.0 gal/min
- Max pressure (loader control valve relief; enhanced high flow 4,000 psi (276 bar))
- 3,450 psi (238 bar)
- Drive pump flow (servo-assist mechanical controls; 109 L/min with electro-hydraulic controls)
- 29.4 gal/min
- Lift cylinder bore
- 0.2 ft
- Lift cylinder rod
- 0.1 ft
- Lift cylinder stroke
- 3 ft
- Bucket cylinder bore
- 0.3 ft
- Bucket cylinder rod
- 0.1 ft
- Bucket cylinder stroke
- 1.3 ft
Undercarriage
- Track width (standard rubber track; heavy-duty tracks optional)
- 17.7 in
- Ground pressure (17.7 in track)
- 4.6 psi (31.7 kPa)
- Track ground contact area
- 2,286 in2 (1.48 m2)
Service capacities
- Fuel tank
- 25.5 gal
- Engine oil, with filter
- 8.9 qt
- Hydraulic tank (reservoir)
- 6.0 gal
- Hydraulic system, with tank
- 11.9 gal
Cab
- ROPS / FOPS (enclosed cab and FOPS Level 2 optional)
- ROPS/FOPS Level 1 canopy with side screens
Electrical
- Alternator
- 160 A
- Battery
- 12 V, 1,000 CCA
- Starter
- 4.29 hp