Specification sheetIssued 20 November 2026
Case · compact track loader
Case TV450B
Case TV450B compact track loader (FPT F5B 3.4 L, Tier 4 Final, vertical lift, 17.7 in rubber tracks, open ROPS canopy, 78 in foundry/excavating bucket) per the Case North America specification sheet CCE202001TV450B (2020), with the dimension letters of its drawing.
USAGlobal
- Rated operating capacity
- 1,432 kg
- power
- 63 kW (84 hp)
- Operating weight
- 4,823 kg
2.04 m3.67 m
1.94 mPerformance
- Rated operating capacity (35% of tipping load)
- 1,432 kg
- Rated operating capacity (50% tipping load)
- 2,045 kg
- Rated operating capacity with counterweight (50% of tipping load, with additional counterweight)
- 2,135 kg
- Tipping load (measured with the 78 in foundry/excavating bucket)
- 4,091 kg
- Breakout force (bucket cylinders, at 217 bar)
- 42 kN
- Breakout force (lift arm) (lift cylinders, hydraulic limit)
- 35 kN
- Top speed (2-speed, high range)
- 12.9 km/h
- Travel speed (low)
- 8.9 km/h
- Traction force (tractive effort)
- 3,370 kgf
- Lift path
- Vertical
- Raise lift arms (cycle time)
- 5.1 s
- Lower lift arms (cycle time)
- 3.5 s
- Bucket dump (cycle time)
- 2.7 s
- Bucket rollback cycle (cycle time)
- 2.0 s
Weight
- Operating weight (open cab, 165 lb operator, 78 in heavy-duty bucket, full fuel)
- 4,823 kg
- Shipping weight
- 4,667 kg
Engine
- Engine model (turbocharged, high-pressure common rail with SCR)
- FPT F5B FL413 D*C001
- Emissions (the Case Europe brochure lists Stage V with the FPT F5M)
- EPA Tier 4 Final
- Cylinders
- 4
- Displacement
- 3.4 L
- Bore
- 99 mm
- Stroke
- 110 mm
- Gross power (SAE J1349 at 2,500 rpm)
- 67 kW (90 hp)
- Net power (SAE J1349 at 2,500 rpm)
- 63 kW (84 hp)
- Max torque (at 1,400 rpm)
- 383 Nm
Hydraulics
- Pump flow (standard auxiliary flow at rated engine rpm)
- 92 L/min
- Pump flow (high flow) (optional, combined)
- 149 L/min
- Pump flow (enhanced high flow) (optional, at 276 bar)
- 133 L/min
- Max pressure (loader control valve relief; enhanced high flow 4,000 psi (276 bar))
- 3,450 psi (238 bar)
- Drive pump flow (servo-assist mechanical controls; 109 L/min with electro-hydraulic controls)
- 111 L/min
- Lift cylinder bore
- 70 mm
- Lift cylinder rod
- 45 mm
- Lift cylinder stroke
- 908 mm
- Bucket cylinder bore
- 76 mm
- Bucket cylinder rod
- 38 mm
- Bucket cylinder stroke
- 405 mm
Undercarriage
- Track width (standard rubber track; heavy-duty tracks optional)
- 0.45 m
- Ground pressure (17.7 in track)
- 4.6 psi (31.7 kPa)
- Track ground contact area
- 2,286 in2 (1.48 m2)
Service capacities
- Fuel tank
- 96.5 L
- Engine oil, with filter
- 8.5 L
- Hydraulic tank (reservoir)
- 22.7 L
- Hydraulic system, with tank
- 45.4 L
Cab
- ROPS / FOPS (enclosed cab and FOPS Level 2 optional)
- ROPS/FOPS Level 1 canopy with side screens
Electrical
- Alternator
- 160 A
- Battery
- 12 V, 1,000 CCA
- Starter
- 3.2 kW (4.29 hp)