Specification sheetIssued 20 November 2026
Bobcat · skid steer loader
Bobcat S66
Bobcat Europe S66 R-series (Doosan D24 2.4 L Stage V engine, 10 x 16.5 heavy-duty tyres, standard bucket, vertical lift path) with the dimension letters, performance and weights of the Bobcat S66-S76-S86 brochure B4501706 (12-24); other rows from the Bobcat Europe product page, which differs on some figures. The S66 is not listed on Bobcat Middle East and is a non-current model in North America (replaced by the S66-2).
USAGlobal
- Rated operating capacity
- 2,610 lb
- power
- 73 hp
- Operating weight
- 7,211 lb
6.7 ft3.7 ft11.2 ft
5.4 ftPerformance
- Rated operating capacity (ISO 14397-1, 50% of tipping load)
- 2,610 lb
- Tipping load (ISO 14397-1)
- 5,201 lb
- Lift breakout force (2,200 daN)
- 4,946 lbf
- Tilt breakout force (2,440 daN)
- 5,485 lbf
- Push force (2,758 daN)
- 6,200 lbf
- Top speed (low range)
- 7.3 mph
- Top speed (two-speed option) (high range; the Bobcat Europe page prints 17.7 km/h)
- 10.7 mph
- Lift path
- Vertical
- Raise lift arms (cycle time)
- 3.8 s
- Lower lift arms (cycle time)
- 2.5 s
- Bucket rollback (cycle time)
- 1.7 s
- Bucket dump (cycle time)
- 2.3 s
Weight
- Operating weight (base machine with bucket, operator and full fuel tank)
- 7,211 lb
- Shipping weight
- 6,479 lb
Engine
- Engine model (D24 BSH SV on the Bobcat Europe page)
- Doosan D24 BSH SV (Bobcat 2.4 L)
- Emissions
- EU Stage V
- Cylinders
- 4
- Displacement (2,400 cm3)
- 0.6 US gal
- Bore
- 0.3 ft
- Stroke
- 0.3 ft
- Gross power (at 2,600 rpm (ISO 14396))
- 73 hp
- Max torque (at 1,800 rpm (ISO 14396))
- 196 lbf·ft
Hydraulics
- Pump flow (standard flow, gear pump)
- 17.6 gal/min
- Pump flow (high flow) (high-flow option)
- 26.9 gal/min
- Max pressure (system relief at quick couplers)
- 23.8-24.5 MPa
- Control valve
- Three-spool, open-centre, float detent on lift, electric auxiliary spool
- Lift cylinder bore
- 0.2 ft
- Lift cylinder rod
- 0.1 ft
- Lift cylinder stroke
- 1.8 ft
- Tilt cylinder bore
- 0.2 ft
- Tilt cylinder rod
- 0.1 ft
- Tilt cylinder stroke
- 1.1 ft
Tyres
- Tyres (standard; 12 x 16.5 solid, super-flotation and severe-duty options)
- 10 x 16.5, 10-ply, heavy duty
- Transmission
- Hydrostatic four-wheel drive, two reversing hydrostatic motors, #80 chains (two per side)
Service capacities
- Fuel tank (the Bobcat Europe brochure prints 93.7 L)
- 28.3 gal
- Engine oil, with filter
- 2.1 US gal
- Hydraulic tank (hydraulic/hydrostatic reservoir)
- 5 US gal
- Hydraulic system, with tank
- 11 US gal
- Chaincase (transmission chaincase reservoir)
- 7 US gal
- Coolant recovery bottle
- 0.7 US gal
Cab
- Sound level, inside cab (operator LpA, 98/37 and 474-1)
- 80 dB(A)
- Sound power level (2000/14/EC)
- 103 dB(A)
Electrical
- Alternator
- 90 A
- Battery
- 12 V, 1000 A cold cranking
- Starter
- 12 V, 2.7 kW