Specification sheetIssued 20 November 2026
Bobcat · skid steer loader
Bobcat S66
Bobcat Europe S66 R-series (Doosan D24 2.4 L Stage V engine, 10 x 16.5 heavy-duty tyres, standard bucket, vertical lift path) with the dimension letters, performance and weights of the Bobcat S66-S76-S86 brochure B4501706 (12-24); other rows from the Bobcat Europe product page, which differs on some figures. The S66 is not listed on Bobcat Middle East and is a non-current model in North America (replaced by the S66-2).
USAGlobal
- Rated operating capacity
- 1,184 kg
- power
- 54.5 kW (73 hp)
- Operating weight
- 3,271 kg
2.05 m1.13 m3.43 m
1.64 mPerformance
- Rated operating capacity (ISO 14397-1, 50% of tipping load)
- 1,184 kg
- Tipping load (ISO 14397-1)
- 2,359 kg
- Lift breakout force (2,200 daN)
- 22 kN
- Tilt breakout force (2,440 daN)
- 24 kN
- Push force (2,758 daN)
- 28 kN
- Top speed (low range)
- 11.8 km/h
- Top speed (two-speed option) (high range; the Bobcat Europe page prints 17.7 km/h)
- 17.3 km/h
- Lift path
- Vertical
- Raise lift arms (cycle time)
- 3.8 s
- Lower lift arms (cycle time)
- 2.5 s
- Bucket rollback (cycle time)
- 1.7 s
- Bucket dump (cycle time)
- 2.3 s
Weight
- Operating weight (base machine with bucket, operator and full fuel tank)
- 3,271 kg
- Shipping weight
- 2,939 kg
Engine
- Engine model (D24 BSH SV on the Bobcat Europe page)
- Doosan D24 BSH SV (Bobcat 2.4 L)
- Emissions
- EU Stage V
- Cylinders
- 4
- Displacement (2,400 cm3)
- 2.4 L
- Bore
- 90 mm
- Stroke
- 94 mm
- Gross power (at 2,600 rpm (ISO 14396))
- 54.5 kW (73 hp)
- Max torque (at 1,800 rpm (ISO 14396))
- 266 Nm
Hydraulics
- Pump flow (standard flow, gear pump)
- 67 L/min
- Pump flow (high flow) (high-flow option)
- 102 L/min
- Max pressure (system relief at quick couplers)
- 23.8-24.5 MPa
- Control valve
- Three-spool, open-centre, float detent on lift, electric auxiliary spool
- Lift cylinder bore
- 70 mm
- Lift cylinder rod
- 45 mm
- Lift cylinder stroke
- 551 mm
- Tilt cylinder bore
- 70 mm
- Tilt cylinder rod
- 38 mm
- Tilt cylinder stroke
- 331 mm
Tyres
- Tyres (standard; 12 x 16.5 solid, super-flotation and severe-duty options)
- 10 x 16.5, 10-ply, heavy duty
- Transmission
- Hydrostatic four-wheel drive, two reversing hydrostatic motors, #80 chains (two per side)
Service capacities
- Fuel tank (the Bobcat Europe brochure prints 93.7 L)
- 107.1 L
- Engine oil, with filter
- 8.1 L
- Hydraulic tank (hydraulic/hydrostatic reservoir)
- 18.9 L
- Hydraulic system, with tank
- 41.6 L
- Chaincase (transmission chaincase reservoir)
- 26.5 L
- Coolant recovery bottle
- 2.6 L
Cab
- Sound level, inside cab (operator LpA, 98/37 and 474-1)
- 80 dB(A)
- Sound power level (2000/14/EC)
- 103 dB(A)
Electrical
- Alternator
- 90 A
- Battery
- 12 V, 1000 A cold cranking
- Starter
- 12 V, 2.7 kW