Toyota 8FGU25

Toyota 50-8FGU25 (LP-only, Toyota 4Y-US engine, 2,250 kg / 5,000 lb at 24 in load centre, standard 2-stage mast) per Toyota Material Handling USA's 2023 Core IC Pneumatic spec sheet - a US model; the 40-8FGU25 is the same truck with a Kubota WG2503 gasoline/LP engine (noted in the Engine rows).

USA

Side

Front

Max fork height: 131.5 in
Free lift: 6.1 in
Overall length (to fork face): 103.9 in
Overall width: 45.3 in
Mast lowered height: 84.5 in
Mast extended height: 179.5 in
Overhead guard height: 83.1 in
Turning radius (outside): 87.5 in
Load distance: 18.5 in
Rear overhang: 20.5 in
Right-angle stacking aisle width: 105.9 in

Dimensions

Fork length (From fork size C): 42 in
Wheelbase: 65 in
Tread width (front / rear): 960 / 965 mm
Ground clearance: 3.7 in

Performance

Rated capacity: 5,000 lb
Travel speed: 10.9 mph
Lift speed: 600 mm/s full load / 640 mm/s no load
Lowering speed: 500 mm/s full load / 500 mm/s no load
Drawbar pull (max, full load): 4,250 lb
Gradeability: 33% max (full load), 28% at 1.5 km/h (full load), 20% no load

Weight

Operating weight (Total truck weight): 7,840 lb

Engine

Engine model: Toyota 4Y-US (LP)
Net power (SAE net, at 2,570 rpm): 51 hp
Max torque (SAE net, at 1,800 rpm): 112 ft-lb
Cylinders: 4
Displacement (2,237 cc): 136 cu in
Engine option (40-8FGU25): Kubota WG2503 gasoline/LP, 42 kW (56 hp) / 44 kW (58 hp) net at 2,600 rpm, 165 / 175 N·m, 2,491 cc
Battery: 12 V / 35 Ah

Transmission

Transmission: Powershift, 1F/1R
Brakes: Hydraulic service / mechanical parking

Hydraulics

Max pressure: 160 kg/cm² (auxiliary, at control valve)
Pump flow: 20 US gpm max (auxiliary)

Tyres

Front tyres: 7.00-12-12PR pneumatic
Rear tyres: 6.00-9-10PR pneumatic

Service capacities

Fuel tank: 15.9 US gal