Toyota 8FD50N
Show metric
EquipmentsFinder

Specification sheetIssued 20 November 2026

Toyota · forklift

Toyota 8FD50N

Toyota 8FD50N (5,000 kg at 600 mm load centre, torque-converter powershift, Toyota 14Z-II 6-cylinder diesel, standard 2-stage Wide Visible mast with 3,000 mm fork height, single 300-15 front tyres) per Toyota's 8FG/8FD50N main vehicle specification sheet (dealer-hosted copy). The gasoline 8FG50N shares the same sheet.

UAEGlobal

Rated capacity
11,023 lb
Operating weight
15,961 lb
Toyota 8FD50N, side view with dimensions (illustration)6.6 ft10.4 ft
Toyota 8FD50N, front view (illustration)4.8 ft

Dimensions

Rear overhang
2 ft 0.2 in
Tread width (rear)
3 ft 7.3 in
Ground clearance (drive axle) (Full load)
8.3 in
Ground clearance (steer axle) (No load)
8.3 in
Ground clearance (counterweight) (No load)
7.9 in
Backrest height
4 ft 5.9 in
Seat to overhead guard height (Overhead guard clearance)
3 ft 5.9 in
Counterweight height
4 ft 4.2 in
Drawbar pin centre height
1 ft 4.5 in
Step height (Floor height 855 mm)
1 ft 9.3 in
Tilt range (forward / backward)
6 deg / 12 deg
Grade clearance (frame / counterweight) (Approach and departure ramp clearance shown on the drawing)
55% / 66%
Fork size
60 x 150 x 1220 mm (T x W x L)
Fork spread (outside, max / min)
1,160 mm / 300 mm
Fork length
4 ft
Overall length (incl. forks) (Estimate: length to fork face 3,170 mm + fork length 1,220 mm)
14.4 ftest.

Performance

Rated capacity (At a 600 mm load centre)
11,023 lb
Travel speed (loaded) (Forward and reverse)
14.0 mph
Travel speed (unloaded) (Forward and reverse)
14.6 mph
Lift speed
480 mm/s loaded / 520 mm/s unloaded
Lowering speed
540 mm/s loaded / 490 mm/s unloaded
Drawbar pull (max, loaded) (3,600 kgf; 16.0 kN (1,630 kgf) unloaded)
7,958 lbf
Gradeability (max, loaded) (22% unloaded; 22% loaded at 1.5 km/h (computed values))
30%

Weight

Operating weight (Total weight)
15,961 lb
Axle load, loaded (front)
24,097 lb
Axle load, loaded (rear)
2,888 lb
Axle load, unloaded (front)
6,713 lb
Axle load, unloaded (rear)
9,248 lb

Engine

Engine model (The 8FG50N gasoline truck uses a Toyota 1FS)
Toyota 14Z-II (diesel)
Rated power (JIS rating at 2,100 rpm (76 PS))
75 hp
Rated speed
2,100 rpm
Max torque (JIS rated torque at 1,600 rpm (27.4 kgf-m))
198 lb-ft
Cylinders
6
Displacement (5,204 cc)
317.6 cu in
Battery (5-hour rating)
12 V / 64 Ah

Transmission

Transmission
Powershift (torque converter), 1 forward / 1 reverse
Brakes
Hydraulic foot service brake / hand parking brake

Hydraulics

Max pressure (Operating pressure for attachments, 18.1 MPa (185 kgf/cm2))
2,625 psi

Tyres

Front tyres (Special tread: dual 8.25-15-14PR (overall width 1,890 mm) or dual 8.25-15)
300-15-18PR pneumatic
Rear tyres
7.00-12-14PR pneumatic
Wheels (front / rear)
2 driven / 2 steered (2x / 2)

Service capacities

Fuel tank
31.7 US gal

Mast options

2-stage Wide Visible (V), 2,500 mm
Fork height 2,500 mm; lowered 2,200 mm; extended 3,935 mm with backrest (3,405 mm without); free lift 125 mm; capacity 5,000 kg at 600 mm
2-stage Wide Visible (V), 2,700 mm
Fork height 2,700 mm; lowered 2,350 mm; extended 4,135 mm with backrest (3,605 mm without); free lift 125 mm; capacity 5,000 kg at 600 mm
2-stage Wide Visible (V), 3,000 mm (Standard mast)
Fork height 3,000 mm; lowered 2,450 mm; extended 4,435 mm with backrest (3,905 mm without); free lift 125 mm; capacity 5,000 kg at 600 mm
2-stage Wide Visible (V), 3,300 mm
Fork height 3,300 mm; lowered 2,600 mm; extended 4,735 mm with backrest (4,205 mm without); free lift 125 mm; capacity 5,000 kg at 600 mm
2-stage Wide Visible (V), 3,500 mm
Fork height 3,500 mm; lowered 2,800 mm; extended 4,935 mm with backrest (4,405 mm without); free lift 125 mm; capacity 5,000 kg at 600 mm
2-stage Wide Visible (V), 3,700 mm
Fork height 3,700 mm; lowered 2,800 mm; extended 5,135 mm with backrest (4,605 mm without); free lift 125 mm; capacity 5,000 kg at 600 mm
2-stage Wide Visible (V), 4,000 mm
Fork height 4,000 mm; lowered 3,050 mm; extended 5,435 mm with backrest (4,905 mm without); free lift 125 mm; capacity 5,000 kg at 600 mm
2-stage Wide Visible (V), 4,500 mm
Fork height 4,500 mm; lowered 3,300 mm; extended 5,935 mm with backrest (5,405 mm without); free lift 125 mm; capacity 5,000 kg at 600 mm
2-stage Wide Visible (V), 5,000 mm
Fork height 5,000 mm; lowered 3,550 mm; extended 6,435 mm with backrest (5,905 mm without); free lift 125 mm; capacity 4,000 kg at 600 mm (4,800 kg with dual front tyres)
3-stage Wide Visible full free lift (FSV), 3,700 mm
Fork height 3,700 mm; lowered 2,200 mm; extended 5,135 mm with backrest (4,635 mm without); free lift 1,330 mm (830 mm with backrest); capacity 5,000 kg at 600 mm
3-stage Wide Visible full free lift (FSV), 4,000 mm
Fork height 4,000 mm; lowered 2,270 mm; extended 5,435 mm with backrest (4,935 mm without); free lift 1,400 mm (900 mm with backrest); capacity 4,900 kg at 600 mm
3-stage Wide Visible full free lift (FSV), 4,300 mm
Fork height 4,300 mm; lowered 2,350 mm; extended 5,735 mm with backrest (5,235 mm without); free lift 1,480 mm (980 mm with backrest); capacity 4,800 kg at 600 mm
3-stage Wide Visible full free lift (FSV), 4,700 mm
Fork height 4,700 mm; lowered 2,450 mm; extended 6,135 mm with backrest (5,635 mm without); free lift 1,580 mm (1080 mm with backrest); capacity 4,300 kg at 600 mm (4,600 kg with dual front tyres)
3-stage Wide Visible full free lift (FSV), 5,000 mm
Fork height 5,000 mm; lowered 2,600 mm; extended 6,435 mm with backrest (5,935 mm without); free lift 1,730 mm (1230 mm with backrest); capacity 4,100 kg at 600 mm (4,500 kg with dual front tyres)
3-stage Wide Visible full free lift (FSV), 5,500 mm
Fork height 5,500 mm; lowered 2,800 mm; extended 6,935 mm with backrest (6,435 mm without); free lift 1,930 mm (1430 mm with backrest); capacity 3,100 kg at 600 mm (4,300 kg with dual front tyres)
3-stage Wide Visible full free lift (FSV), 6,000 mm
Fork height 6,000 mm; lowered 3,050 mm; extended 7,435 mm with backrest (6,935 mm without); free lift 2,180 mm (1680 mm with backrest); capacity 2,400 kg at 600 mm (4,100 kg with dual front tyres)