Specification sheetIssued 20 November 2026
Toyota · forklift
Toyota 8FD30
Toyota 62-8FD30 (3,000 kg at 500 mm load centre, torque-converter powershift, Toyota 1DZ-II diesel, standard 2-stage 3 m mast), the 8-series 3-tonne diesel counterbalance forklift, per Toyota's 8FG/8FD30 main vehicle specification sheet. The manual-clutch 60-8FD30 and the 2Z-engined 70/72-8FD30 share the same sheet.
UAEGlobal
- Rated capacity
- 3,000 kg
- Operating weight
- 4,270 kg
1.7 m2.8 m
1.24 mDimensions
- Overall length (incl. forks) (Computed: length to fork face plus the 1,070 mm fork length)
- 3.865 m
- Rear overhang
- 0.595 m
- Tread width (rear)
- 0.965 m
- Ground clearance (drive axle)
- 0.15 m
- Ground clearance (steer axle)
- 0.18 m
- Ground clearance (counterweight)
- 0.175 m
- Backrest height
- 1.22 m
- Seat to overhead guard height (Overhead guard clearance)
- 1.055 m
- Counterweight height
- 1.13 m
- Drawbar pin centre height
- 0.335 m
- Step height / floor height
- 495 mm / 730 mm
- Tilt range (forward / backward)
- 6° / 11°
- Grade clearance (frame / counterweight) (Approach and departure ramp clearance shown on the drawing)
- 62% / 49%
- Fork size
- 45 x 120 x 1070 mm (T x W x L)
- Fork spread (outside, max / min)
- 1,070 mm / 240 mm
- Fork length
- 1.07 m
Performance
- Rated capacity (At a 500 mm load centre)
- 3,000 kg
- Travel speed (loaded) (Forward and reverse)
- 17.5 km/h
- Travel speed (unloaded) (Forward and reverse)
- 18 km/h
- Lift speed
- 500 mm/s loaded / 530 mm/s unloaded
- Lowering speed
- 500 mm/s loaded / 500 mm/s unloaded
- Drawbar pull (max, loaded) (2,000 kgf; 10.4 kN (1,060 kgf) unloaded)
- 20 kN
- Drawbar pull at 1.5 km/h (loaded) (Computed value, 1,790 kgf)
- 18 kN
- Gradeability (max, loaded) (20% unloaded; 25% loaded at 1.5 km/h (computed values))
- 28%
Weight
- Operating weight (Total weight, same for the 60-8FD30 and 62-8FD30)
- 4,270 kg
- Axle load, loaded (front)
- 6,230 kg
- Axle load, loaded (rear)
- 1,040 kg
- Axle load, unloaded (front)
- 1,500 kg
- Axle load, unloaded (rear)
- 2,770 kg
Engine
- Engine model
- Toyota 1DZ-II (diesel)
- Rated power (JIS rating at 2,600 rpm (60 PS); the manual-clutch 60-8FD30 is rated 40 kW at 2,400 rpm)
- 44 kW (59 hp)
- Rated speed
- 2,600 rpm
- Max torque (JIS rated torque at 1,600 rpm (17.0 kgf-m))
- 167 Nm
- Cylinders
- 4
- Displacement
- 2.5 L
- Battery
- 12 V / 55 Ah (5-hour rating)
Transmission
- Transmission (The 60-8FD30 has a manual 2-speed transmission)
- Powershift (torque converter), 1 forward / 1 reverse
- Brakes
- Hydraulic foot service brake / foot-operated parking brake
Hydraulics
- Max pressure (Operating pressure for attachments, 14.7 MPa (150 kgf/cm2))
- 147 bar
Tyres
- Front tyres
- 28x9-15-12PR pneumatic
- Rear tyres
- 6.5-10-10PR pneumatic
- Wheels (front / rear)
- 2 driven / 2 steered (2x / 2)
Service capacities
- Fuel tank
- 60 L