Scania R 770
Show metric
EquipmentsFinder

Specification sheetIssued 20 November 2026

Scania · truck

Scania R 770

Scania R 770 6x4 prime mover (tractor), CR20 normal-roof sleeper cab, 3,825 mm wheelbase, DC16 770 V8 Euro 6 - Scania Australia chassis specification SCA0825 (Nov 2021). Scania publishes no Middle East R 770 sheet; front overhang and cab depth come from the R 730 6x4 sheet of the same chassis.

UAEGlobal

power
770 hp
torque
2,730 lb-ft
Wheelbase
12.5 ft
Scania R 770, side view with dimensions (illustration)12.5 ft22.5 ft
Scania R 770, front view (illustration)

Dimensions

Overall length (Estimate: front overhang 1,410 mm (R 730 sheet) + wheelbase 3,825 + rear overhang 1,619 mm; the R 730 sheet shows 6,871 mm with a 1,636 mm overhang)
269.8 inest.
Bumper to back of cab (BBC) (Printed as front to back of cab on the R 730 6x4 sheet; same CR20 cab)
90.2 in
Frame width (Scania F950 frame)
2.5 ft

Engine

Engine model
Scania DC16 770, 16.4 L 90 degree V8
Emissions
Euro 6 (SCR + EGR)
Cylinders
8
Displacement
4.3 US gal
Gross power (at 1,900 rpm)
770 hp
Max torque (at 1,000-1,450 rpm)
2,730 lb-ft
Fuel system
Scania XPI fuel injection, variable-geometry turbocharger, EGR/SCR with catalytic converter
Filtration
Centrifugal engine oil filter, spin-on turbocharger oil filter, cartridge fuel filters; air cleaner under the front grille
Cooling fan
Electronically controlled viscous drive
Alternator
24 V, 180 A
Air compressor
Twin cylinder, dis-engagable
Renewable fuel
All Euro 6 V8 engines run on HVO and biodiesel

Transmission

Gearbox
Scania GRSO926R overdrive 14-speed, Opticruise automated, with gearbox oil cooler
Retarder
Scania R4100
Power take-off
Electrical preparation only
Rear axle ratio
3.07, with power divider and differential locks
Rear axles
Scania AD200SA housings, RB662/R660 differentials
Front axle
Scania AM640S

Weight

Kerb weight (front 6,100 kg + rear 3,880 kg; tanks full of fuel and urea, without turntable, bull bar or driver; +/- 5%)
22,002 lb
Front axle load (front air spring capacity)
16,535 lb
Rear axle load (rear air suspension capacity)
41,888 lb

Chassis

Frame
Scania F950, 270 x 90 x 9.5 mm
Front suspension
Air springs, 7,500 kg capacity, anti-roll bar
Rear suspension
Scania 4-bag air suspension, 19,000 kg capacity
Brakes
Scania electronically controlled disc brakes, EBS with ABS and traction control, electronic park brake
Batteries
24 V (2 x 12 V, 230 A), rear of chassis
Cab
Scania CR20 normal-roof sleeper, four-point air suspension, electric tilt, ECE R29 cab strength
Beds
Lower bed extendable 800-1,000 mm
Front bumper
Front underrun protection to ECE R93

Tyres

Tyres
295/80 R22.5 front and rear (Continental), 22.5 x 8.25 Alcoa Durabright aluminium rims, 335 mm PCD

Service capacities

Fuel tank (710 L left + 320 L right)
272.1 US gal
AdBlue tank (right-hand side)
19.3 US gal