Komatsu WA600-8
Show imperial
EquipmentsFinder

Specification sheetIssued 20 November 2026

Komatsu · wheel loader

Komatsu WA600-8

Komatsu WA600-8 (EPA Tier 4 Final, SAA6D170E-7) per the Komatsu America brochure (dealer-hosted copy), 3990 mm boom, 35/65-33-36PR (L-4) tyres, 7.0 m³ heaped stockpile bucket with spade nose, teeth and segment edges. The WA600-6 is not covered.

USAGlobal

Bucket capacity
7 m³
power
395 kW (529 HP)
Operating weight
56,460 kg
Static tipping load (full turn)
32,520 kg
Komatsu WA600-8, side view with dimensions (illustration)4.5 m4.5 m12.2 m
Komatsu WA600-8, front view (illustration)3.59 m

Dimensions

Overall length (bucket on ground) (7.0 m³ stockpile bucket, 3990 mm boom)
12.215 m
Tread width (Centre of tread to centre of tread)
2.65 m
Width over tyres
3.59 m
Bucket width
3.805 m
Reach at max lift (At max height and 45 deg dump angle)
1.885 m
Reach at 2130 mm clearance (7 ft clearance, 45 deg dump angle)
3.065 m
Reach with arm horizontal (Bucket level)
4.245 m
Operating height (fully raised)
8.04 m
Loader clearance circle diameter (Bucket at carry, outside corner of bucket)
17.09 m
Turning radius (centre of outside tyre)
7.075 m
Digging depth (0 deg)
0.13 m
Digging depth (10 deg)
0.54 m
Articulation angle (Steering angle 43 degrees each direction; from SMS Equipment (Komatsu dealer) copy of the Komatsu brochure)
43°

Weight

Operating weight (Includes lubricants, coolant, full fuel tank, ROPS cab and operator)
56,460 kg
Operating weight range
55 400 – 57 460 kg
Bucket weight
6,152 kg

Engine

Engine model
Komatsu SAA6D170E-7
Emissions
EPA Tier 4 Final
Type
Water-cooled, 4-cycle, variable-geometry turbocharged, after-cooled, cooled EGR diesel
Cylinders
6
Bore
170 mm
Stroke
170 mm
Displacement
23.2 L
Gross power (SAE J1995 @ 1,800 rpm)
396 kW (530 HP)
Net power (ISO 9249 / SAE J1349 @ 1,800 rpm)
395 kW (529 HP)
Fan drive
Hydraulic

Performance

Bucket capacity (Heaped, stockpile bucket, 3990 mm boom (struck 5.8 m³))
7 m³
Bucket capacity range (Excavating, stockpile and load-and-carry buckets in the table)
6.4 – 7.8 m³
Static tipping load (straight)
38,036 kg
Static tipping load (full turn)
32,520 kg
Breakout force (The brochure prints 38,200 kgf; converted to kN)
375 kN
Top speed (Forward 4th gear, P-mode, 35/65-33 tyres; 37.7 km/h with lock-up clutch on)
33.8 km/h
Hydraulic cycle time
8.7 s raise / 2.3 s dump / 4.1 s lower (rated load in bucket)

Hydraulics

Pump flow (Loader control piston pumps, 239 + 239 lpm at rated rpm)
478 L/min
Max pressure (Loader relief setting 34.3 MPa)
343 bar
Steering pump flow (At rated rpm; relief 34.3 MPa)
163 L/min
Boom cylinders
2 × 200 mm bore × 1067 mm stroke
Bucket cylinder
1 × 225 mm bore × 776 mm stroke
Steering cylinders
2 × 100 mm bore × 486 mm stroke
Control valve
2-spool; boom raise/hold/lower/float, bucket tilt-back/hold/dump

Transmission

Transmission
Automatic full-powershift, planetary type; 3-element, 1-stage, 2-phase torque converter; 4F/4R
Forward 1 (P-mode, 35/65-33 tyres, lock-up off)
6.7 km/h
Forward 2 (P-mode, 35/65-33 tyres, lock-up off)
11.7 km/h
Forward 3 (P-mode, 35/65-33 tyres, lock-up off)
20.3 km/h
Forward 4 (P-mode, 35/65-33 tyres, lock-up off)
33.8 km/h
Reverse 1 (P-mode, 35/65-33 tyres, lock-up off)
7.3 km/h
Reverse 2 (P-mode, 35/65-33 tyres, lock-up off)
12.8 km/h
Reverse 3 (P-mode, 35/65-33 tyres, lock-up off)
22 km/h
Reverse 4 (P-mode, 35/65-33 tyres, lock-up off)
37 km/h
Axles and final drive
Four-wheel drive; front fixed, rear centre-pin oscillating (22 deg total); full-floating axles, planetary final drive
Brakes
Hydraulically actuated wet multiple-disc brakes on four wheels; wet multiple-disc parking brake
Steering angle (Each direction)
43°

Tyres

Tyres (Tyres the dimension table is based on)
35/65-33-36PR (L-4)

Service capacities

Fuel tank
718 L
DEF tank
39.7 L
Cooling system
150 L
Engine oil
86 L
Hydraulic system
443 L
Torque converter and transmission
78 L
Axle, front
185 L
Axle, rear
193 L