Komatsu D375A-8
Show imperial
EquipmentsFinder

Specification sheetIssued 20 November 2026

Komatsu · dozer

Komatsu D375A-8

Komatsu D375A-8 (SAA6D170E-7, U.S. EPA Tier 4 Final) with strengthened dual tilt Semi-U blade, giant ripper, ROPS cab and 610 mm extreme service shoes, from the Komatsu America D375A-8 brochure (build with 74,090 kg operating weight).

UAEGlobal

Blade capacity
18.5 m³
power
455 kW (609 hp)
Operating weight
74,090 kg
Blade width
4.775 m
Komatsu D375A-8, side view with dimensions (illustration)4.28 m7.86 m
Komatsu D375A-8, front view (illustration)3.11 m

Dimensions

Overall length (with blade) (Strengthened dual tilt Semi-U blade without ripper; 8.215 m with Full-U blade)
7.855 m
Width over tracks (Track gauge plus shoe width (2.50 m + 0.61 m))
3.11 m
Ground clearance
0.61 m
Shoe width (Extreme service; 710 mm and 810 mm optional)
0.61 m
Grouser height (Single grouser)
0.093 m

Weight

Operating weight (Strengthened dual tilt Semi-U blade, giant ripper, 610 mm extreme service shoes, ROPS cab, operator, full fuel tank and rated fluids)
74,090 kg
Tractor weight (With rated fluids, full fuel tank, operator and standard equipment)
56,340 kg
Ground pressure (ISO 16754, at operating weight; 113 kPa for the tractor alone; 134.0 kPa with Full-U blade)
132.1 kPa (1.35 kgf/cm2, 19.2 psi)
Blade weight (Semi-U) (Dozer equipment; Full-U with spill guard 12,490 kg)
11,440 kg

Engine

Engine model
Komatsu SAA6D170E-7
Type
4-cycle, water-cooled, direct injection
Aspiration
Turbocharged, air-to-air charge air cooler, cooled EGR
Emissions
U.S. EPA Tier 4 Final
Cylinders
6
Bore x stroke
170 x 170 mm
Displacement
23.2 L
Gross power (SAE J1995, forward, at 1,800 rpm; 578 kW (775 hp) in reverse)
474 kW (636 hp)
Net power (ISO 9249 / SAE J1349, forward, at 1,800 rpm; 558 kW (748 hp) in reverse. At maximum radiator fan speed 432 kW (580 hp) forward, 536 kW (719 hp) reverse)
455 kW (609 hp)
Rated engine speed
1,800 rpm
Governor
Mid-range, electronic
Fan drive
Hydraulic
Lubrication
Gear pump, force lubrication, full-flow filter

Transmission

Transmission (Hydraulically actuated, force-lubricated; automatic or manual shift modes)
TORQFLOW: 3-element, 1-stage, 1-phase torque converter with lockup clutch; planetary multi-disc power shift, 3 forward / 3 reverse (plus 3rd low)
Travel speed, forward (max) (3rd gear)
11.8 km/h
Travel speed, reverse (max) (3rd gear)
15.8 km/h
Travel speed, 1st forward (Reverse 4.6 kph)
3.5 km/h
Travel speed, 2nd forward (Reverse 8.9 kph)
6.8 km/h
Travel speed, 3rd low forward (Reverse 9.7 kph)
8 km/h
Steering
Palm Command Control System (PCCS) joystick; spring-loaded wet multi-disc steering clutches and wet multi-disc steering brakes, hydraulically released
Min turning radius
4.2 m
Final drives
Double-reduction spur and planetary, bolt-on segmented sprocket teeth

Undercarriage

Undercarriage (Cylindrical high-tensile-strength steel track roller frame)
Komatsu Bogie (K-Bogie): lubricated track rollers on a rubber-cushioned bogie suspension; oscillating equalizer bar with shoulder pad and pivot shaft
Track shoes (each side)
41
Track rollers (each side)
8
Carrier rollers (each side)
2
Shoe type
Extreme service, single grouser, lubricated tracks
Ground contact area (610 mm shoes; 56,520 cm2 with 710 mm, 64,480 cm2 with 810 mm)
48,560 cm2 (7,527 in2)
Shoe width options
610 mm standard; 710 mm (+680 kg), 810 mm (+1,360 kg)

Blade

Blade capacity (Semi-U, ISO 9246; Full-U with spill guard 22.0 m3 (28.8 yd3))
18.5 m³
Maximum tilt at blade corner (Semi-U; 1.28 m Full-U)
1.17 m

Hydraulics

System (Spool valves mounted beside the hydraulic tank)
Closed-centre load sensing system (CLSS)
Pump type
Variable piston
Pump flow (Implement pump, at rated engine speed)
366 L/min
Max pressure (Implement relief valve setting 29.8 MPa (304 kgf/cm2))
298 bar
Blade lift cylinders
2 - bore 140 mm
Blade tilt cylinders (Dual tilt; 1 cylinder on single tilt)
2 - bore 200 mm
Ripper lift cylinders
2 - bore 200 mm
Ripper tilt cylinders
2 - bore 180 mm

Service capacities

Fuel tank
1,200 L
Cooling system
145 L
Engine oil
86 L
Transmission, bevel gear and steering system (Including torque converter)
150 L
Final drives (each)
65 L
Hydraulic system (Refill; add 45 L for the giant or multi-shank ripper)
130 L