Kobelco CKE1350G-4
Show metric
EquipmentsFinder

Specification sheetIssued 20 November 2026

Kobelco · crawler crane

Kobelco CKE1350G-4

Kobelco CKE1350G-4, 150 t hydraulic crawler crane (lattice boom 15.2-76.2 m, Isuzu 6UZ1 270 kW Stage V engine, 55 t counterweight, 910 mm flat shoes) per Kobelco Europe's CKE1350G-4 specification sheet; earlier CKE1350G generations and the CKS1350 are not covered.

UAEGlobal

lifting capacity
165.3 US tons
Main boom length (m, fully extended)
250 ft 0 in
power
362 hp
Kobelco CKE1350G-4, side view with dimensions (illustration)12 ft
Kobelco CKE1350G-4, front view (illustration)

Dimensions

Width over carbody weights
17 ft 3 in
Tail slewing radius
18 ft 1 in

Weight

Operating weight (Upper and lower machine, 55 t counterweight, 10.8 t carbody weight, basic boom, hook and accessories)
304,017 lb
Counterweight (Base 10,000 kg + 10 slabs of 4,500 kg)
121,254 lb
Carbody weight (2 pieces)
23,810 lb
Transport weight, base machine (With gantry and wire ropes, without crawlers and self-removal cylinder; 38,205 kg with boom base, backstop and self-removal cylinder)
69,975 lb
Crawler weight (each)
32,187 lb
Ground pressure
107.9 kPa

Crane

Max lifting capacity (Crane boom, at 4.4 m radius; auxiliary sheave required)
165.3 US tons
Main boom length (m, fully extended)
250 ft 0 in
Main boom length retracted (m) (Shortest crane boom)
49 ft 10 in
Long boom length (44.3 t at 10.6 m)
270 ft 0 in
Fixed jib
24.4 m + 12.2 m minimum to 61.0 m + 30.5 m maximum combination
Fixed jib max lifting capacity (At 16.0 m radius)
29.5 US tons
Luffing boom length (80 t at 8.0 m)
157 ft 2 in
Luffing jib
Up to 53.3 m jib; combinations 44.8 m + 53.3 m and 47.9 m + 32.0 m; 36 t at 12.0 m
Counterweight self-removal
Counterweight and crawler self-removal device, standard
Hoist line speed (max)
120 m/min on the first layer, single line (120 to 3 m/min)
Rated line pull (Maximum line pull 234 kN (23.8 tf), reference value not based on rope strength)
13.5 tf
Hoist rope
26 mm: main winch 275 m, auxiliary winch 255 m, third winch 240 m
Hoist drums
666 mm P.C.D. x 669 mm wide, grooved for 26 mm rope; 351 m storage length
Boom hoist
20 mm x 190 m rope, 48 to 2 m/min line speed; boom guy line 30 mm
Slewing speed
2.1 rpm, 360 deg, manual four-position swing lock
Hook block weights
150 t 2,300 kg; 70 t 1,200 kg; 35 t 900 kg; ball hook 460 kg
Hook lifting limit
4.7 m (150 t hook), 4.5 m (70 t hook), 4.3 m (35 t hook)

Undercarriage

Travel speed (High range; 0.9 km/h low range)
0.8 mph
Gradeability (max)
30 %
Track shoes
910 mm flat shoes; sealed maintenance-free track rollers
Travel drive
Independent hydraulic propel drive in each crawler side frame with planetary gearbox; skid and counter-rotating steering

Engine

Engine model
Isuzu 6UZ1, 6-cyl, 4-stroke, water-cooled, turbocharged and intercooled; complies with NRMM Stage V
Displacement
600 in3
Gross power (At 2,000 rpm; engine speed is set at 1,850 rpm in power mode; rating basis not stated)
362 hp
Max torque (At 1,500 rpm)
1,058 lbf-ft
Fuel tank
106 gal
AdBlue tank (Usable volume)
8 gal

Hydraulics

Main pumps
4 variable displacement piston pumps
Max pressure, load hoist, boom hoist and propel (31.9 MPa)
4,627 psi
Max pressure, swing (27.5 MPa)
3,989 psi
Max pressure, control (5.4 MPa)
783 psi
Hydraulic tank capacity (At the reference level)
120 gal