Kenworth T280
Show metric
EquipmentsFinder

Specification sheetIssued 20 November 2026

Kenworth · truck

Kenworth T280

Kenworth T280 Class 6 straight truck (4x2), short aero hood (107.5 in BBC) with the raised roof shown in the brochure photograph, PACCAR PX-7 and TX-8 automatic: figures from the Kenworth 2024 medium-duty brochure (T180/T280/T380/T480) and the PACCAR PX-7 spec sheet. The standard low roof is 4 in lower.

USAGlobal

power
325 hp
torque
750 lb-ft
Kenworth T280, side view with dimensions (illustration)
Kenworth T280, front view (illustration)7.8 ft

Dimensions

Front overhang (Bumper to front axle)
40 in
Overall width (Width across the cab and front fenders in the top view of the Aero short hood drawing, mirrors excluded (120.5 in over mirrors); rear dual width depends on axle and wheels)
94 in
Hood tilt angle (Hood tilts a full 90 degrees; all fluid checks in one place)
90°
Wheelbase options (Hydraulic brake models; air brake models are available in custom lengths)
153, 162, 176, 188, 206, 218, 236, 245, 254, 260 and 272 in
Roof options (Raised roof gives 4 in more cab height)
Low roof (standard) or raised roof (optional); optional stainless steel sunvisor with the raised roof
Cab seating
Crew of three; aluminum cab, 7 in digital display, automatic temperature control

Engine

Engine model (PX-9, Cummins L9N and Cummins B6.7N engines are optional)
PACCAR PX-7, 6.7 L in-line 6 (200 hp / 600 lb-ft standard)
Emissions (PACCAR PX-7 certification)
EPA 2024
Gross power (Highest PX-7 rating that is not fire-service only; PX-7 listed to 360 hp, PX-9 up to 450 hp)
325 hp
Max torque (At 1,600 rpm with the 325 hp PX-7 rating; 800 lb-ft at 1,800 rpm on the 360 hp fire-service rating)
750 lb-ft
Displacement
409 cu in
Bore x stroke (Inline 6-cylinder)
107 x 124 mm (4.21 x 4.88 in)
Governed speed
2,600 rpm
Engine dry weight
1,150 lb
Engine oil capacity
19.5 US qt
PX-7 ratings (hp, lb-ft at rpm) (340 and 360 hp are fire-service ratings only)
200, 220 and 240 hp 600 at 1,300; 250, 260 and 280 hp 660 at 1,400; 300 hp 660 at 1,600; 325 hp 750 at 1,600; 340 hp 700 at 1,500; 360 hp 800 at 1,800
PX-9 ratings (hp, lb-ft at rpm) (Optional; the 380 hp 1,150 lb-ft, 400 hp and 450 hp ratings are fire-service only)
260, 270 and 300 hp 860 lb-ft; 330 hp 1,000; 350 hp 1,050; 360 hp 1,150; 370 and 380 hp 1,250; 380 hp 1,150, 400 and 450 hp 1,250 (all at 1,200 rpm)
Cummins natural gas engines (Optional)
B6.7N 200-240 hp, 520-560 lb-ft at 1,600 rpm; L9N 300 hp 860 and 320 hp 1,000 lb-ft at 1,300 rpm
Aftertreatment
Horizontal under-rail DPF/SCR and tailpipe (standard); right-hand under-cab DPF/SCR with horizontal, vertical side-of-cab or vertical back-of-cab tailpipe

Transmission

Gearbox
PACCAR TX-8 8-speed automatic (standard); TX-12 (PX-9 only), Eaton 6 and 10-speed manual and Allison 5 and 6-speed automatic optional
Gear ratios (TX-8) (Overall ratio 7.65)
4.89 to 0.64; reverse -4.25
Max torque rating (TX-8) (GCWR 57,000 lb (25,855 kg); park lock capacity 33,000 lb GCW maximum)
1,050 lb-ft
Transmission weight (TX-8) (Wet weight)
375 lb
Transmission length (TX-8)
30 in
PTO (TX-8) (PTO torque limit 516 lb-ft for a single PTO)
Chelsea 272U or Z35, Muncie P58
Shifter
PACCAR column-mounted stalk shifter (Drive, Neutral, Reverse, Manual and engine brake selector); Allison seat-mounted lever shifter with Allison transmissions

Weight

Gross vehicle weight (Class 6, straight truck)
26,000 lb
Front axle rating (The specification table lists Meritor 12-20K as the standard front axle family and Hendrickson Steertek 8-14.6K as an option)
8,000-12,000 lb (3,629-5,443 kg)
Rear axle rating (The specification table lists Meritor 16-30K single rear axles as standard and Dana 11.5-30K as an option)
11,500-21,000 lb (5,216-9,526 kg)
Front drive axle (Optional)
Up to 12,000 lb (5,443 kg)

Chassis

Frame rails (Filled-dot entries on the T280 column; 10-5/8 x 5/16 in and 11-5/8 x 3/8 in rails are optional)
9-7/8 x 1/4 in and 10-11/16 x 1/2 in heat-treated steel
Front suspension
Mono-leaf springs with shock absorbers (standard); taper-leaf optional
Rear suspension
Kenworth single 13.5-18K (standard); Reyco 13.5-31K and Hendrickson 21-26K optional
Brakes
Air disc or drum (standard); hydraulic disc optional; ABS standard
Batteries
Two PACCAR GP31 threaded-post batteries (standard); 3 or 4 GP31 or 2 or 3 AGM optional; Delco 40SI 320 A alternator optional
Bumper
Aero in-mold gray (standard); painted or chrome aero optional; Braden winch provision available
Hood
Aero 3-piece SMC hood, short (107.5 in BBC) or medium (109.5 in BBC); stainless steel mesh grille
Cab (Crew of three and roof options from the 2024 medium-duty brochure)
Kenworth 2.1 m medium-duty aluminium cab, seats three; low roof standard, raised roof (4 in taller) optional

Tyres

Tyres (Continental standard; Apollo, Goodyear, Michelin or Yokohama optional)
19.5 in and 22.5 in tyres on steel wheels (aluminum optional)

Service capacities

Fuel tank (D-shaped rectangular, standard; 60, 70, 80 and 100 US gal optional)
50 US gal
Transmission oil (TX-8)
4.49 US gal