John Deere 750
Show metric
EquipmentsFinder

Specification sheetIssued 4 November 2026

John Deere · dozer

John Deere 750

Current John Deere 750 P-Tier crawler dozer (successor of the 750L/750K) in XLT form with 559 mm shoes, ROPS and Power-Angle-Tilt blade; the brochure lists only the EPA Final Tier 4/EU Stage V PowerTech PVS 6068 engine. Deere publishes no Gulf/Middle-East sheet, so the US brochure (MD750PAU) is used.

USAGlobal

Blade capacity
5.2 cu. yd.
power
175 hp
Operating weight
37,569 lb.
Blade width
10 ft. 10 in.
DACI
Side
I
Front
D
Overall length (base machine)
17 ft. 7 in.
A
Height (to top of cab)
10 ft. 8 in.
I
Blade height
4 ft. 9 in.
C
Ground clearance
14 in.

Dimensions

Overall length with extended drawbar
18 ft. 5 in.
Track gauge (XLT; LGP 2134 mm)
74 in.
Width over tracks
8 ft. 0 in.
Blade width
10 ft. 10 in.
Track length on ground
122 in.
Shoe width (XLT; LGP 860 mm)
22 in.
Tread depth (single-bar grouser)
2.7 in.
Overall width with blade angled
9 ft. 10.5 in.

Weight

Operating weight
37,569 lb.

Performance

Blade capacity (XLT straight PAT blade, SAE; LGP 4.5 m³)
5.2 cu. yd.
EBlade lift height
36 in.
FBlade digging depth
25.5 in.
Blade angle
24°
Blade tilt (XLT)
17 in.
Maximum drawbar pull
58,250 lb.
Ground pressure (XLT; LGP 30.5 kPa)
43.7 kPa

Engine

Engine model
John Deere PowerTech PVS 6068 (6.8 L)
Emissions
EPA Final Tier 4 / EU Stage V
Net power (SAE net rated power at 1,700 rpm)
175 hp
Displacement
414 cu. in.

Transmission

Transmission
Automatic dual-path hydrostatic
Travel speed, forward (max) (Forward and reverse; optional 11.0 km/h)
6.0 mph
Travel speed, reverse (max) (Optional 11.0 km/h)
6.0 mph

Undercarriage

Track rollers (each side)
8

Hydraulics

Pump flow (At unloaded high idle)
34 gpm
Max pressure (System relief 24 993 kPa)
3,625 psi

Service capacities

Fuel tank
95.5 gal.
Cooling system (With recovery tank)
8.3 gal.
Engine oil, with filter
7.4 gal.
Hydraulic tank (Reservoir with filter)
25.9 gal.
Transmission (Reservoir with filter)
15.1 gal.

Service intervals

Hydraulic and hydrostatic oil (Extended from 2,000 h on the previous model)
4,000 hours