Specification sheetIssued 20 November 2026
John Deere · motor grader
John Deere 672G
John Deere 672G / 672GP (Grade Pro) motor grader with the PowerTech PSS 9.0L engine (U.S. EPA Final Tier 4 / EU Stage V), 3.66 m moldboard and 14R24 tyres, from Deere's G-Series brochure for the 622G, 672G, 772G and 872G (DKAGGDR6). Figures for the Tier 3 / Stage IIIA and Tier 2 builds are in the notes.
USAGlobal
- power
- 255 hp
- Operating weight
- 37,788 lb
- Blade width
- 12 ft 0 in
10.4 ft20.2 ft29.2 ft
8.2 ftDimensions
- Overall width (14R24 tyres; 2.64 m with 17.5R25)
- 98.0 in
- Wheel tread on ground (14R24 tyres; 2.16 m with 17.5R25)
- 82.0 in
- Ground clearance (front axle)
- 23.1 in
Weight
- Operating weight (with full fuel tank, 3.66 m moldboard, 14R24 tyres and operator, no attachments)
- 37,788 lb
- Operating weight, front
- 10,660 lb
- Operating weight, rear
- 27,128 lb
- Typical operating weight (with front push block and rear ripper/scarifier; 19,330 kg for the Tier 3 / Tier 2 builds)
- 44,092 lb
- Typical operating weight, front
- 13,260 lb
- Typical operating weight, rear
- 30,832 lb
- Maximum operating weight
- 55,000 lb
Engine
- Engine model (Tier 3 / Stage IIIA: PowerTech Plus 9.0L; Tier 2 / Stage II: PowerTech 9.0L)
- John Deere PowerTech PSS 9.0L
- Emissions
- U.S. EPA Final Tier 4 / EU Stage V
- Cylinders
- 6
- Displacement
- 548 in3
- Aspiration
- Series turbocharged, charge-air cooled
- Net power (gears 7 and 8 (peak))
- 255 hp
- Net power, gear 1
- 200 hp
- Net power, gear 2
- 210 hp
- Net power, gear 3
- 225 hp
- Net power, gear 4
- 230 hp
- Net power, gear 5
- 240 hp
- Net power, gear 6
- 250 hp
- Max torque (net peak torque)
- 963 lb-ft
- Net torque rise
- 50%
- Air cleaner
- Dual element, dry, with restriction indicator
- Electrical system
- 24 V, 2 batteries (1,400 CCA, 440 min reserve capacity), 130 A alternator (200 A optional)
Performance
- Top speed (forward, gear 8 (no tyre slip at 2,180 rpm, 14.0R24 tyres))
- 28.3 mph
- Turning radius (front steer and articulation)
- 23 ft 8 in
- Articulation angle, left/right
- 22°
- Front wheel lean angle, each direction
- 20°
- Front axle oscillation, total
- 32°
Transmission
- Transmission
- Direct-drive John Deere PowerShift Plus, 8 forward / 8 reverse, modulated shift-on-the-go, Event-Based Shifting, inching pedal
- Gear 1 speed
- 2.5 mph
- Gear 2 speed
- 3.5 mph
- Gear 3 speed
- 4.8 mph
- Gear 4 speed
- 6.8 mph
- Gear 5 speed
- 10.2 mph
- Gear 6 speed
- 14.4 mph
- Gear 7 speed
- 20.1 mph
- Gear 8 speed
- 28.3 mph
- Drive
- Optional 6-wheel drive: automatic dual-path hydrostatic front-wheel drive, effective gears 1-7
- Differentials
- Spiral bevel, hydraulically actuated clutch type, selectable manual or automatic lock
- Brakes
- Foot-controlled wet multi-disc brakes on all 4 tandem wheels, two independent systems; spring-applied, hydraulically released parking brake
- Final drives
- Inboard-mounted planetary, sealed in cooled, filtered oil
Hydraulics
- Pump flow (maximum, variable-displacement piston pump, closed-centre pressure-compensated load-sensing)
- 56 gal/min
- Max pressure (18,961 kPa)
- 2,750 psi
- Pump displacement
- 90 cm3 (5.5 in3)
- Hydraulic system
- Closed-centre, pressure-compensated load-sensing (PCLS), variable-displacement piston pump
Frame and circle
- Mainframe
- Welded box; 307 x 307 mm minimum section, 16 mm side walls, 23 mm top and bottom plates
- Mainframe modulus
- 1,445 cm3 minimum vertical section; 2,245 cm3 average at saddle
- Circle diameter
- 60 in
- Circle rotation
- 360°
- Circle side shift, right and left
- 31 in
- Circle
- Standard: bronze or nylon wear inserts. Premium: sealed, lubricated roller-element slewing bearing
- Drawbar
- Welded box draft frame, machined for flatness, with double ball-and-socket pivot connection
Moldboard and blade range
- Blade width (base length)
- 12 ft 0 in
- Moldboard height
- 24 in
- Moldboard thickness
- 0.88 in
- Cutting edge
- 152 x 16 mm Dura-Max through-hardened steel
- Blade side shift, right or left
- 26.9 in
- Max shoulder reach outside wheels (frame straight, right or left)
- 82.0 in
- Max lift above ground
- 19.3 in
- Maximum blade position angle (bank cut angle, right or left)
- 90°
- Blade tip range, forward (pitch at ground line)
- 42°
- Blade tip range, backward
- 5°
- Blade pull (at maximum operating weight)
- 49,500 lb
Attachments
- Front scarifier width of cut (5 shanks (maximum 9))
- 48 in
- Front scarifier maximum depth
- 13.2 in
- Mid-mount scarifier width of cut (11 shanks)
- 46.7 in
- Mid-mount scarifier maximum depth
- 12.8 in
- Rear ripper width of cut (3 shanks (maximum 5))
- 87.2 in
- Rear ripper maximum depth
- 16.8 in
- Rear ripper penetration force
- 21,426 lb
- Rear ripper pry-out force
- 30,207 lb
- Rear scarifier width of cut (up to 9 shanks)
- 86 in
- Rear scarifier maximum depth
- 12.7 in
Tyres
- Tyres
- 14R24 on 254 mm (10 in) rims; optional 17.5R25 on 356 mm (14 in) rims
Service capacities
- Fuel tank
- 110 gal
- DEF tank
- 6 gal
- Cooling system (48.5 L on Tier 3 / Tier 2 builds)
- 14.5 gal
- Engine oil (with filter)
- 7.5 gal
- Transmission
- 7.5 gal
- Differential housing
- 10 gal
- Tandem housing, each
- 19.5 gal
- Circle gearbox
- 1.5 gal
- Hydraulic tank (53.0 L on Tier 3 / Tier 2 builds)
- 16 gal