Specification sheetIssued 4 November 2026
John Deere · dozer
John Deere 450
Current John Deere 450 P-Tier crawler dozer (successor of the 450K), standard (non-LGP) track with 406 mm shoes, ROPS, straight PAT blade, with the PowerTech PWX 4045 EPA Tier 3/EU Stage IIIA engine the brochure lists alongside the Tier 4 Final one; Deere publishes no Gulf/Middle-East sheet, so the US brochure (MD450PAU) is used.
USAGlobal
- Blade capacity
- 1.6 m³
- power
- 58 kW (78 hp)
- Operating weight
- 8,081 kg
- Blade width
- 2.464 m
- Overall length (base machine)
- 4.022 m
- Height (to top of cab)
- 2.899 m
- Blade height
- 0.955 m
- Ground clearance
- 0.345 m
D
A
I
C
Dimensions
- Overall length with winch and fairlead
- 4.746 m
- Track gauge (Standard; LGP 1651 mm)
- 1.448 m
- Width over tracks
- 1.854 m
- Blade width
- 2.464 m
- Track length on ground
- 2.184 m
- Shoe width (Standard; LGP 610 mm)
- 0.406 m
- Tread depth (single-bar grouser)
- 0.049 m
- Overall width with blade angled
- 2.268 m
Weight
- Operating weight
- 8,081 kg
Performance
- Blade capacity
- 1.6 m³
- EBlade lift height
- 0.781 m
- FBlade digging depth
- 0.53 m
- Blade angle
- 23°
- Blade tilt (Standard blade)
- 0.331 m
- Maximum drawbar pull
- 131 kN
- Ground pressure (Standard; LGP 31.3 kPa)
- 43.9 kPa
Engine
- Engine model
- John Deere PowerTech PWX 4045 (4.5 L)
- Emissions
- EPA Tier 3 / EU Stage IIIA
- Net power
- 58 kW (78 hp)
- Max torque (Net peak torque at 1,200 rpm (Tier 3 engine))
- 334 Nm
- Displacement
- 4.5 L
Transmission
- Transmission
- Automatic dual-path hydrostatic
- Travel speed, forward (max) (Forward and reverse; optional 9.7 km/h)
- 8 km/h
- Travel speed, reverse (max) (Optional 9.7 km/h)
- 8 km/h
Undercarriage
- Track rollers (each side)
- 6
Hydraulics
- Pump flow (At unloaded high idle)
- 60 L/min
- Max pressure (System relief 20 684 kPa)
- 207 bar
Service capacities
- Fuel tank
- 202 L
- Cooling system (With recovery tank)
- 16.9 L
- Engine oil, with filter
- 14.7 L
- Hydraulic system, with tank
- 70.5 L
- Final drives (each)
- 8.5 L
Service intervals
- Engine oil and filter
- 500 hours
- Fuel filters (Primary and final fuel filters)
- 500 hours
- Final drive oil
- 1,000 hours
- Hydraulic and hydrostatic filters
- 2,000 hours
- Hydraulic and hydrostatic oil
- 4,000 hours
- Coolant
- 6,000 hours