JLG 660SJ
Show metric
EquipmentsFinder

Specification sheetIssued 20 November 2026

JLG · boom lift

JLG 660SJ

JLG 660SJ telescopic boom lift with 1.83 m jib, current 600 Series per JLG's ANSI/CSA spec sheet 3131052 R0524_03 (North America, dealer-hosted copy). Capacities, engine data and tyres come from the 600S/660SJ Operation and Safety Manual 31215033 Rev C (2020).

UAEUSAGlobal

Platform height
65 ft 8 in
Working height
72.2 ft
Horizontal outreach
57 ft 1 in
Platform capacity
550 lb
JLG 660SJ, side view with dimensions (illustration)8.5 ft8.2 ft32.8 ft
JLG 660SJ, front view (illustration)8.1 ft

Dimensions

Platform height
65 ft 8 in
Horizontal outreach (With the 249 kg unrestricted platform load)
57 ft 1 in
Horizontal outreach (750 lb zone) (With the 340 kg restricted platform load; manual 7-3)
47 ft 1 in
Jib length
6 ft

Weight

Operating weight (Certain options or country standards increase weight)
25,341 lb
Gross machine weight, 2WD (approximate) (Manual 7-2, AS/NZS manual)
26,707 lb
Gross machine weight, 4WD (approximate) (Manual 7-2, AS/NZS manual)
26,947 lb
Max ground bearing pressure
6.00 kg/cm²
Max tyre load (Manual 7-1)
14,720 lb

Engine

Engine model
Ford MSG425-DF dual fuel (gasoline/LPG), 4 cylinder, 2.5 L
Gross power (Ford MSG425-DF on gasoline; 59 kW (80 hp) on LPG (manual 7-6))
84 hp
Engine model (diesel)
Deutz D2.9L4 Tier 4 Final
Gross power (diesel) (Deutz D2.9L4, 36.5 kW in the manual)
48.8 hp
Engine model (diesel option)
Deutz TD2.9L4 turbo, 50 kW (67 hp)
Max torque (diesel option) (Deutz TD2.9L4 at 1,800 rpm)
173 lb-ft
Displacement (Deutz D2.9L4) (4 cylinders, 92 x 110 mm bore and stroke)
178 cu in
Engine speed (Deutz D2.9L4)
1,200 rpm low, 1,800 rpm mid, 2,600 rpm high
Engine speed (Ford MSG425-DF)
1,000 rpm min low, 3,200 rpm max high
Fuel consumption (Deutz D2.9L4) (Average, per hour)
0.85 gal/h
Electrical system
12 V DC
Auxiliary power
12 V DC

Performance

Platform capacity (Unrestricted)
550 lb
Platform capacity (restricted)
750 lb
Swing (Continuous)
360°
Platform rotation (Hydraulic rotator)
180°
Jib range of articulation (+71 / -61 degrees)
132°
Drive speed
3.8 mph
Gradeability
45%
Tilt cut-out
5°
Axle oscillation
8 in
Turning radius (inside, 2WS) (Manual 7-2 gives 2.8 m)
9 ft 7 in
Turning radius (outside, 2WS) (Manual 7-2 gives 5.89 m)
19 ft 7 in
Turning radius (inside, 4WS) (Manual 7-2 gives 1.27 m)
5 ft 3 in
Turning radius (outside, 4WS) (Manual 7-2 gives 3.76 m)
12 ft 8 in
Max operating slope (Manual 7-1)
5°
Max wind speed
12.5 m/s
Max manual force
445 N
Working height (Estimate: platform height 20.02 m + 2 m (JLG's working-height convention outside North America))
72.2 ftest.

Tyres

Tyres
Foam filled 355/55D625 (14 x 17.5), load range G, 14 ply (standard)
Tyres (option)
Foam filled 41/18LL x 22.5 turf and sand; foam filled non-marking 355/55D625; quad tracks

Service capacities

Fuel tank (Diesel or gasoline/LPG machine)
31 gal
Hydraulic tank
34 gal
Hydraulic system, with tank (Manual 7-3)
40 gal
Engine oil, with filter (Deutz D2.9) (Manual table 7-3 gives 9.1 L)
2.4 gal
Engine oil, with filter (Ford MSG425-DF)
7 qt
Cooling system (Deutz D2.9)
13.2 qt
Cooling system (Ford MSG425-DF)
2 gal
Drive hub (each) (Half full at the level plug)
24 oz
Hydraulic oil
Mobilfluid 424 (SAE 10W-30, ISO 55) or equivalent UTTO