JLG 600AJ
Show metric
EquipmentsFinder

Specification sheetIssued 20 November 2026

JLG · boom lift

JLG 600AJ

JLG 600AJ articulating boom lift (600 Series, 227 kg unrestricted platform) per JLG's ANSI/CSA spec sheet 3131120 R1219_A92.20 (Dec 2019), dealer-hosted copy. Ford dual fuel or Deutz D2.9 diesel; 600AJ Narrow figures are noted where they differ.

UAEUSAGlobal

Platform height
60 ft 7 in
Working height
67.2 ft
Horizontal outreach
39 ft 9 in
Platform capacity
500 lb
JLG 600AJ, side view with dimensions (illustration)8.3 ft8.1 ft28.9 ft
JLG 600AJ, front view (illustration)8.2 ft

Dimensions

Tail swing (Plan view shows 0.0 tail swing)
Zero
Overall width (turf tyres) (41/18LL x 22.5 turf tyres; 2.49 m on 355/55D-625)
100 in

Weight

Operating weight (600AJ Narrow 10,977 kg (24,200 lb))
22,691 lb
Max ground bearing pressure (Narrow 6.6 kg/cm² (94 psi))
5.25 kg/cm²
Gross machine weight (2WS) (Approximate; 4WS 10,315 kg (22,740 lb); 7 ft chassis 10,886 kg (24,000 lb))
22,240 lb
Max tyre load
12,500 lb

Engine

Engine model
Ford MSG425 dual fuel (gasoline/LPG)
Gross power (Ford MSG425 dual fuel)
84 hp
Engine model (diesel option)
Deutz D2.9L4
Emissions
Tier 4 Final (Deutz diesel)
Gross power (diesel) (Deutz D2.9L4)
49 hp
Auxiliary power
12V DC
Max torque (Ford MSG425 on gasoline at 2,400 rpm; 197 Nm (145 lb-ft) on LP gas)
142 lb-ft
Gross power (LP gas) (Ford MSG425 at 3,200 rpm; 84 hp on gasoline)
80 hp
Max torque (diesel) (Deutz diesel at 1,800 rpm)
173 lb-ft
Engine speed (Ford, low / high)
1,000 / 3,200 rpm
Engine speed (Deutz, low / high)
1,200 / 2,600 rpm
Alternator (Ford)
150 A

Performance

Platform height
60 ft 7 in
Horizontal outreach
39 ft 9 in
Up and over height
26 ft 7 in
Platform capacity (Unrestricted)
500 lb
Swing (Continuous)
360°
Platform rotation (Hydraulic rotator)
180°
Jib range of articulation (+70 / -60 degrees)
130°
Top speed (2WD and 4WD, same figure on the sheet)
4.25 mph
Gradeability
30% (2WD) / 45% (4WD)
Tilt cut-out
4°
Axle oscillation
8 in
Turning radius (inside) (4-wheel steer; 3.33 m (10 ft 11 in) 2-wheel steer; narrow 4WS 1.7 m)
5 ft 6 in
Turning radius (outside) (4-wheel steer; 5.36 m (17 ft 7 in) 2-wheel steer; narrow 4WS 3.4 m)
11 ft 8 in
Platform capacity (CE / Australia) (Unrestricted)
500 lb
Max operating slope (ANSI/CE/Australia; 5 degrees China)
4°
Working height (Platform height used on this page (18.47 m / 60 ft 7 in, US sheet) + 2 m, the EMEA working-height convention. JLG's EMEA sheet (230 kg platform) prints 20.42 m, from its slightly lower 18.42 m platform height)
67.2 ft
Jib length (Articulating jib, overall length)
6 ft

Tyres

Tyres (Narrow models: 36x14-20 solid)
IN355/55D-6.25 foam filled (standard)
Tyre load range
G, 14 ply (IN355/55D-625); 36x14-20 solid is boss pattern
Tyre load capacity (static) (IN355/55D-625 foam filled)
11,800 lb

Service capacities

Fuel tank
30 gal
Hydraulic system (Sheet lists "capacity" under Hydraulic System)
30.6 gal
Hydraulic system, with tank
40 gal
Engine oil, with filter (Deutz TD 2.9L (manual 7-22 gives 9.0 L); Deutz D2011L04 10.5 L; Ford DF 2.5L MSG 425 6.6 L (7-4))
2.4 US gal
Coolant (Ford engine)
0.63 gal
Wheel drive hub (each) (Half full at the level plug; EP gear oil)
20 oz
Swing drive hub (90W-80 gear oil)
43 oz

Service intervals

Engine oil and filter (Deutz TD 2.9) (Or every year; Deutz D2011 1,200 h)
600 hours
Hydraulic return filter (First at 50 h, then every 6 months or 300 h)
300 hours
Hydraulic charge filter (First at 50 h, then every 6 months or 300 h)
300 hours
Hydraulic oil (Or every 2 years; check level daily)
1,200 hours
Drive and swing hub oil (Or every 2 years; check level every 150 h or 3 months)
1,200 hours
Swing bearing grease (Or every 3 months)
150 hours
Wheel bearing repack (Or every 2 years)
1,200 hours