Specification sheetIssued 20 November 2026
JLG · boom lift
JLG 400S
JLG 400S telescopic boom lift (400 Series, no jib, 272 kg unrestricted / 454 kg restricted platform) per JLG's ANSI/CSA spec sheet 3131045 R0626_03. Capacities, engine data, tyres and service data come from the 400S/460SJ Operation and Safety Manual 31215015 Rev C (2020).
UAEUSAGlobal
- Platform height
- 40 ft
- Working height
- 46.6 ft
- Horizontal outreach
- 33 ft 7 in
- Platform capacity
- 600 lb
8.1 ft7.8 ft24.9 ft
7.6 ftDimensions
- Platform height
- 40 ft
- Horizontal outreach (Standard specifications table; the key-specs box on the same sheet gives 10 m (33 ft 3 in))
- 33 ft 7 in
Weight
- Operating weight (Certain options or country standards increase weight)
- 13,640 lb
- Gross machine weight (approximate) (Manual table 7-1)
- 13,425 lb
- Max ground bearing pressure (Manual gives 60 psi)
- 4.19 kg/cm2
- Max tyre load (Manual table 7-1)
- 7,200 lb
- Counterweight (Critical stability weight, plus or minus 19.3 kg)
- 1,060 lb
- Battery (Critical stability weight)
- 66 lb
- Platform and console, 36 x 96 in (Critical stability weight; 36 x 72 in is 95 kg (209 lb))
- 240 lb
Engine
- Engine model (Standard on the sheet; Deutz D2.9L4 diesel is the alternative)
- Kubota WG2503 dual fuel (gasoline/LPG), 4 cylinder, 2.5 L
- Gross power (Kubota WG2503 on gasoline at 2,700 rpm; 46 kW on LP gas (manual 7-5))
- 61 hp
- Engine model (diesel)
- Deutz D2.9L4 Tier 4 Final, 4 cylinder
- Gross power (diesel) (Deutz D2.9L4; manual gives 36.5 kW)
- 49 hp
- Displacement (Kubota WG2503) (Bore and stroke 88 x 102.4 mm)
- 153 cu in
- Displacement (Deutz D2.9L4) (4 cylinders, 92 x 110 mm bore and stroke)
- 178 cu in
- Engine speed (Deutz D2.9L4)
- 1,200 rpm low, 1,800 rpm mid, 2,500 rpm high
- Engine speed (Kubota WG2503)
- 2,700 rpm max
- Fuel consumption (Deutz D2.9L4) (Average, per hour)
- 1.2 gal/h
- Fuel consumption (Kubota, gasoline, driving) (Per hour; 2.43 L/h at idle)
- 2.45 gal/h
- Fuel consumption (Kubota, LP gas, driving) (Per hour (5.88 kg/h); 2.52 L/h at idle)
- 2.68 gal/h
- Electrical system
- 12 V DC
- Auxiliary power
- 12 V DC
Performance
- Platform capacity (Unrestricted; CE and Australia 270 kg (manual 7-1))
- 600 lb
- Platform capacity (restricted) (CE and Australia 450 kg (manual 7-1))
- 1,000 lb
- Swing (Continuous)
- 360°
- Platform rotation (Hydraulic rotator)
- 180°
- Drive speed (Manual gives 7.2 km/h (4.5 mph))
- 4.25 mph
- Gradeability
- 45%
- Tilt cut-out
- 5°
- Turning radius (inside)
- 6 ft 5 in
- Turning radius (outside)
- 15 ft 8 in
- Max operating slope (Manual 7-1)
- 5°
- Max wind speed
- 12.5 m/s
- Max manual force (ANSI; 400 N for CE (90 lb))
- 445 N
- Max hydraulic system pressure
- 3,000 psi
- Working height (Estimate: platform height 12.19 m + 2 m (JLG's working-height convention outside North America))
- 46.6 ftest.
Tyres
- Tyres
- Foam filled 12 x 16.5 (standard)
- Tyres (option)
- Foam filled non-marking 12 x 16.5; foam filled 14 x 17.5; foam filled turf and sand 33/16LL x 16.1
- Tyre weight (14 x 17.5, foam filled)
- 328 lb
- Tyre weight (33/16LL x 16.1, foam filled)
- 440 lb
Service capacities
- Fuel tank (Diesel or gasoline/LPG machine)
- 22 gal
- Hydraulic tank (Sheet figure; manual table 7-3 gives 123 L (32.5 gal))
- 36 gal
- Hydraulic system, with tank (Manual table 7-3)
- 40 gal
- Engine oil, with filter (Deutz D2.9)
- 2.4 gal
- Engine oil, with filter (Kubota WG2503)
- 2.5 gal
- Cooling system (Deutz D2.9) (Manual 7-4 engine table gives 12.1 L (3.2 gal))
- 2.9 gal
- Cooling system (Kubota WG2503) (Engine only 5.4 L (1.4 gal))
- 2.25 gal
- Drive hub (each) (Half full at the level plug)
- 24 oz
- Swing drive hub (90W-80 gear oil)
- 40 oz
- Hydraulic oil (Premium cold-weather grade (viscosity grade 32) below -7 C)
- Mobilfluid 424 (API GL-3) or equivalent UTTO
Service intervals
- Engine oil and filter (Deutz D2.9) (Or every year)
- 600 hours
- Fuel filters (Deutz D2.9) (Or every year; drain the pre-filter water daily)
- 600 hours
- Air filter (Or 6 months, or when the indicator shows)
- 300 hours
- Coolant (Deutz D2.9) (Or 2 years)
- 1,000 hours
- Hydraulic oil (Or 2 years; check the level daily)
- 1,200 hours
- Hydraulic return filter (First at 50 h, then every 300 h or 6 months)
- 300 hours
- Drive hub oil (Or 2 years; check the level every 150 h)
- 1,200 hours
- Swing drive hub oil (Or 2 years; first change at 50 h; check every 150 h)
- 1,200 hours