Specification sheetIssued 20 November 2026
JLG · boom lift
JLG 1350SJP
JLG 1350SJP Ultra Series telescopic boom lift with 2.44 m JibPLUS, Deutz TCD2.9L4 Tier 4 Final engine, 454 kg restricted / 227 kg unrestricted platform. Dimensions and performance follow JLG's spec sheet 3131043 R0823_06 and JLG's English Ultra Series sheet; capacities, tyres and service data come from Operation and Safety Manual 3121141 (May 2017, S/N 0300141473 to present).
UAEUSAGlobal
- Platform height
- 135 ft
- Working height
- 142.1 ft
- Horizontal outreach
- 80 ft
- Platform capacity
- 500 lb
10 ft38.9 ft
12.5 ftDimensions
- Ground clearance (chassis) (Manual gives 0.647 m)
- 25.5 in
- Platform height (English sheet and manual (41.2 m); the Portuguese sheet gives 41.5 m and the Australian sheet 41.30 m)
- 135 ft
- Platform height (restricted) (Manual table 6-2)
- 125 ft
- Working height (Australian sheet)
- 142.1 ft
- Horizontal outreach (With the 227 kg unrestricted platform load)
- 80 ft
- Horizontal outreach (restricted) (With the 454 kg restricted platform load; manual table 6-2)
- 70 ft
- Jib length (JibPLUS)
- 8 ft
Weight
- Operating weight (Certain options or country standards increase weight; English sheet 20,411 kg (45,000 lb), Australian sheet 20,400 kg)
- 44,750 lb
- Gross machine weight, platform empty (Manual table 6-4)
- 44,750 lb
- Max ground bearing pressure (Manual gives 7.38 kg/cm2 (105 psi))
- 7.52 kg/cm2
- Max tyre load (Manual table 6-4)
- 26,250 lb
- Counterweight (Manual table 6-17)
- 8,500 lb
- Boom (complete) (Manual table 6-17)
- 11,850 lb
- Engine assembly (Manual table 6-17)
- 1,275 lb
- Platform, 36 x 96 in (Manual table 6-17)
- 245 lb
- Tyre and wheel (foam filled) (Manual table 6-17; solid 449 kg (990 lb))
- 867 lb
Engine
- Engine model
- Deutz TCD2.9L4 Tier 4 Final, 4 cylinder, turbo diesel
- Gross power (Deutz TCD2.9L4)
- 74.2 hp
- Max torque (Deutz TCD2.9L4 at 1,800 rpm; manual table 6-9)
- 192 lb-ft
- Engine speed (Manual table 6-9)
- 900 rpm minimum, 1,200 rpm low set, 2,500 rpm high set
- Fuel consumption (Average, per hour)
- 1.2 gal/h
- Electrical system
- 12 V DC
- Auxiliary power
- 12 V DC
- Generator (nominal / continuous) (Optional; the Australian sheet lists a 5.5 kVA generator)
- 10 hp
Hydraulics
- Hydraulic reservoir (Manual table 6-5 gives 208 L tank and 250 L system)
- 55 gal
- Hydraulic system, with tank (Manual table 6-5)
- 66 gal
- Max hydraulic system pressure
- 4,600 psi
- Hydraulic oil
- Mobilfluid 424 or equivalent (API GL-3); Mobil DTE 13 below -7 C
Performance
- Platform capacity (Unrestricted; CE and Australia 230 kg)
- 500 lb
- Platform capacity (restricted) (CE and Australia 450 kg)
- 1,000 lb
- Swing (Continuous)
- 360°
- Platform rotation (Hydraulic rotator)
- 180°
- Jib range of articulation (+75 / -55 degrees (JibPLUS vertical motion))
- 130°
- Jib horizontal motion (Working; 244 degrees stowed (manual table 6-2))
- 180°
- Drive speed (Stowed; 0.5 km/h elevated (Australian sheet))
- 3.25 mph
- Gradeability
- 45%
- Tilt cut-out
- 5°
- Turning radius (inside, axles retracted)
- 14 ft 5 in
- Turning radius (inside, axles extended)
- 8 ft
- Turning radius (outside, axles retracted)
- 22 ft 6 in
- Turning radius (outside, axles extended)
- 19 ft 4 in
- Crab steer ratio (Ratio of forward travel to lateral travel)
- 1:1
- Axle oscillation
- 12 in
- Max operating slope (Side slope, boom stowed; manual table 6-4)
- 5°
- Max wind speed
- 12.5 m/s
- Max manual force
- 400 N
Tyres
- Tyres (Manual table 6-6; 445/50D710 foam filled on the sheet)
- Foam filled 445/50D710, load range J, 18 ply (standard)
- Tyres (option)
- 445/65 solid
- Tyre load rating (At 6.9 bar)
- 26,500 lb at 100 psi
Service capacities
- Fuel tank (Optional 200 L (52.8 gal) tank; manual table 6-5)
- 31 gal
- Engine oil, with filter (Deutz TCD2.9)
- 2.4 gal
- Cooling system (Deutz TCD2.9) (Engine only 3 L (0.79 gal), manual table 6-9)
- 3.2 gal
- Swing gearbox (GL-5 gear oil, fill to cover the ring gear)
- 79 oz
- Wheel drive hub (each) (S/N 0300100131 to present; 0.5 L on earlier and Reggiana Riduttori hubs)
- 2.1 qt
Service intervals
- Engine oil and filter (Deutz TCD2.9) (Or six months)
- 500 hours
- Fuel filters (Deutz TCD2.9) (Or every year; drain the pre-filter water daily)
- 600 hours
- Air filter (Or 6 months, or when the indicator shows)
- 300 hours
- Coolant (Or 2 years)
- 1,000 hours
- Hydraulic oil (Or 2 years; check the level daily)
- 1,200 hours
- Hydraulic return filter (First at 50 h)
- 300 hours
- Wheel drive hub oil (First change at 150 h)
- 1,200 hours
- Swing gearbox oil (Check the level every 150 h)
- 1,200 hours