Specification sheetIssued 20 November 2026
JCB · telehandler
JCB 535-125
JCB 535-125 HiViz Loadall, per JCB's specification sheet 9999/5401 (01/11, Issue 5) for the 535-125 and 535-140 HiViz. Engine is the 63 kW JCB 4.4 L diesel (Stage II or III) with the 74.2 kW option; the later Stage V 535-125 is listed at a higher weight.
UAEGlobal
- lift capacity
- 7,716 lb
- Lift height
- 40 ft 3 in
- forward reach
- 26 ft 5 in
- power
- 85 hp
8.5 ft9 ft15.6 ft
7.7 ftDimensions
- Overall width with stabilisers fully deployed
- 8 ft 5 in
- Outside turn radius (over tyres)
- 12 ft 4 in
- Carriage rollback angle (At ground level)
- 37°
- Carriage dump angle (With the boom fully raised)
- 13°
Weight
- Operating weight
- 21,429 lb
Engine
- Engine model (Stage II (naturally aspirated) or Stage III (turbo), territory dependent)
- JCB 4-cylinder diesel, 4.4 L
- Gross power (Standard engine, at 2,200 rpm)
- 85 hp
- Max torque (Standard Stage III turbo engine at 1,200 rpm; 320 Nm on the Stage II naturally aspirated engine)
- 267 lbf ft
- Gross power, high-power engine (Optional, at 2,200 rpm)
- 100 hp
- Max torque, high-power engine (Optional Stage III, turbocharged and cooled, at 1,300 rpm; 425 Nm (313 lbf ft) on the Stage II version)
- 324 lbf ft
- Displacement
- 269 in3
- Cylinders
- 4
- Bore x stroke
- 103 x 132 mm
Transmission
- Transmission
- Torque converter, 4-speed powershift (4 forward, 4 reverse)
- Top speed (33 km/h (20 mph) with the optional transmission)
- 18 mph
- Drive (JCB epicyclic hub-reduction drive/steer axles with Max-Trac torque-proportioning differentials)
- Permanent 4-wheel drive
- Service brakes
- Servo-assisted, hydraulically activated, oil-immersed multi-disc, front and rear axles
- Parking brake
- Hand-operated disc brake on the gearbox output
- Steering
- Hydrostatic power steering: front-wheel, all-wheel or crab steer
Hydraulics
- Max pressure (Operating system pressure)
- 3,770 psi
- Pump flow
- 29.1 US gpm
- Boom raise / lower time
- 10.4 / 8.1 s
- Extend / retract time
- 15.7 / 12.8 s
- Carriage dump / crowd time
- 1.8 / 2.3 s
Lift performance
- Max lift capacity
- 7,716 lb
- Lift capacity to full height (Stabilisers extended)
- 7,716 lb
- Lift capacity at full reach (Stabilisers extended)
- 2,535 lb
- Lift height (Stabilisers extended)
- 40 ft 3 in
- Reach at max lift height (Stabilisers extended)
- 1 ft 6 in
- Max forward reach (Stabilisers extended)
- 26 ft 5 in
- Reach with 1 tonne load (Stabilisers extended)
- 26 ft 5 in
- Placing height (Stabilisers extended; EN 1459 Annex B)
- 38 ft 7 in
- Lift capacity to full height, stabilisers retracted (Chassis levelling (sway) angle +/-9 deg)
- 3,307 lb
- Lift capacity at full reach, stabilisers retracted
- 441 lb
- Lift height, stabilisers retracted
- 39 ft 7 in
- Reach at max lift height, stabilisers retracted
- 4 ft 6 in
- Max forward reach, stabilisers retracted
- 26 ft 7 in
- Reach with 1 tonne load, stabilisers retracted
- 17 ft 5 in
- Placing height, stabilisers retracted
- 37 ft 5 in
Tyres
- Tyres (Traction and industrial tyres optional)
- 15.5/80-24
Service capacities
- Fuel tank
- 32.1 UK gal
- Hydraulic tank
- 27.9 UK gal
- Cooling system
- 5.1 UK gal
Cab and electrics
- Cab
- ROPS ISO 3471 and FOPS ISO 3449
- Electrics
- 12 V negative earth, 95 Ah battery, 95 A alternator