Specification sheetIssued 20 November 2026
Iveco · truck
Iveco S-Way
S-Way AS440S46T/P 4x2 tractor, 3,800 mm wheelbase, Cursor 13 (xC13) 460 hp Euro VI Step E, ZF 12 TX-2250 TD automated gearbox - Iveco Espana S-Way MY24 data sheet (October 2024). Figures are for the standard 315/70 R22.5 tyres; Iveco publishes no Middle East S-Way sheet online.
UAEGlobal
- power
- 338 kW (460 hp)
- torque
- 2,500 Nm
- GCW
- 44,000 kg
- Wheelbase
- 3.8 m
3.84 m3.8 m6.25 m
2.55 mDimensions
- Bumper to back of cab (BBC) (Estimate: front overhang VA 1,410 mm + start of body CL 940 mm)
- 2.35 mest.
- Turning radius (kerb to kerb; 8.5 m wall to wall (7.5 m and 8.3 m on the 3.650 m wheelbase))
- 7.7 m
- Approach angle
- 12°
- Departure angle
- 36°
- Ramp angle (ventral angle)
- 13°
Engine
- Engine model
- Iveco Cursor 13 (FPT xC13), 6-cylinder in-line, common rail, eVGT turbocharger
- Emissions
- Euro VI Step E, Hi-SCR (DOC + DPF + SCR + CUC), no EGR
- Cylinders
- 6
- Displacement
- 12.9 L
- Bore x stroke
- 135 x 150 mm
- Injection pressure
- 2,500 bar
- Gross power (at 1,650 rpm)
- 338 kW (460 hp)
- Max torque (at 820 rpm)
- 2,500 Nm
- Engine dry weight
- 1,018 kg
- Engine coolant capacity (64 L with intarder)
- 44 L
- Engine brake power (at 2,200 rpm, 1,800 Nm; optional high-performance brake 530 kW at 2,200 rpm and 2,500 Nm from 1,300 rpm)
- 450 kW (603 hp)
Transmission
- Gearbox
- ZF 12 TX-2250 TD (Hi-Tronix) automated 12-speed, 2 reverse (2 more optional)
- Gear ratios
- 1st 16.69, 2nd 12.92, 3rd 9.93, 4th 7.67, 5th 5.90, 6th 4.57, 7th 3.66, 8th 2.83, 9th 2.17, 10th 1.68, 11th 1.29, 12th 1.00; reverse 15.54 and 12.03
- Rear axle ratio (Meritor single-reduction range 2.06-3.36)
- 2.17, 2.31, 2.47 or 2.64 on 315/70 R22.5; 2.31, 2.47, 2.64 or 3.08 on 315/80 R22.5
- Rear axle
- Meritor 17x-HE single reduction, 13,000 kg technical capacity
- Front axle
- Iveco 5890-ON, forged double-T beam, up to 9,000 kg technical capacity
Weight
- Kerb weight (minimum, without driver and fifth wheel, 90% fuel)
- 6,981 kg
- GVW (technical maximum; 18,000 kg permitted)
- 20,000 kg
- GCW (technical maximum; 40,000 kg permitted)
- 44,000 kg
- Front axle load (technical and permitted)
- 8,000 kg
- Rear axle load (technical maximum; 11,500 kg permitted)
- 13,000 kg
- Front axle kerb weight
- 5,056 kg
- Rear axle kerb weight
- 1,925 kg
- Payload (permitted weight less minimum kerb weight)
- 11,019 kg
Chassis
- Cab
- AS (Active Space) high-roof sleeper cab, max. width 2,550 mm; mechanical cab suspension and one lower bunk standard; air cab suspension in the Driving Comfort Plus pack, low-roof AS cab optional
- Frame
- C-profile rolled rails 302.4 x 80 x 6.7 mm, 769.4 mm between rails
- Fifth wheel brackets
- 105 x 63 x 8 mm
- Front suspension
- Parabolic leaf springs, double-acting dampers, 45 mm anti-roll bar
- Rear suspension (height range +140 / -61 mm)
- Four-bag air suspension, 60 mm anti-roll bar, reaction bars, ECAS electronic height control
- Brakes
- Dual-circuit air, ZF mBSP EBS with ESP, ABS and ASR; ventilated discs front and rear (816 cm2); spring parking brake; AEBS standard
- Air compressor
- 352 cc
- Electrical system
- 24 V, 2 x 12 V 220 Ah batteries, 28 V / 90 A alternator, Hi-MUX architecture
Tyres
- Tyres
- 315/70 R22.5 standard, 22.5 x 9.00 rims; 315/80 R22.5 optional
Service capacities
- Fuel tank (right-hand side)
- 290 L
- AdBlue tank (right-hand side)
- 50 L