Specification sheetIssued 20 November 2026
International · truck
International HX Series
International HX520 6x4 tractor, 120 in BBC set-forward front axle, with the 56 in sleeper shown in the brochure photograph, from the 2024-25 HX520 spec sheet (TAD20005) and HX Series brochure (TAD20). The HX620 is the 119 in BBC set-back model with a 50.2 in BA.
USAGlobal
- power
- 451 kW (605 hp)
- torque
- 2,779 Nm
- Wheelbase
- 6.198 m
6.2 m
Dimensions
- Wheelbase range
- 169-392 in (4.29-9.96 m)
- Cab configurations
- Day cab; 56 in low and high sleeper cabs; 73 in high sleeper cab
- Cab
- 56 in sleeper (as drawn), HX520 120 in BBC; day cab, 56 in low and high sleepers and 73 in high sleeper offered
- Axle configurations
- 6x4 and 8x6 (HX series brochure also lists 4x2 on request)
Engine
- Engine model
- International S13 Integrated 12.74 L (400-515 hp, 1,450-1,850 lb-ft) or Cummins X15 15 L (430-605 hp, 1,650-2,050 lb-ft)
- Displacement (International S13; the Cummins X15 is 14.9 L (912 cu in))
- 12.7 L
- Gross power (Highest rating offered (Cummins X15); the International S13 tops out at 515 hp (384 kW))
- 451 kW (605 hp)
- Max torque (Highest rating offered (Cummins X15, 605 hp at 1,000 rpm); the S13 tops out at 1,850 lb-ft (2,508 Nm))
- 2,779 Nm
- Bore x stroke (S13) (In-line 6, 4 valves per cylinder, dual overhead camshaft, fixed-geometry turbocharger, 1,800 bar common rail)
- 126 x 166 mm (5.12 x 6.30 in), compression ratio 23:1
- Engine weight (S13) (Total engine weight)
- 1,036 kg
- Engine oil capacity (S13)
- 45 L
- Design life B10 (S13)
- 1,931,000 km
- Displacement (Cummins X15)
- 14.9 L
- Bore x stroke (Cummins X15) (In-line 6, 4 valves per cylinder, single overhead camshaft, variable-geometry turbocharger, direct injection)
- 137 x 169 mm (5.3 x 6.65 in), compression ratio 18.9:1
- Engine weight (Cummins X15) (Total engine weight)
- 1,343 kg
- Engine oil capacity (Cummins X15)
- 53 L
- Design life B10 (Cummins X15)
- 1,609,000 km
- Cummins X15 ratings (Governed speed 2,000 rpm unless noted)
- 430 hp 1,650 lb-ft at 950 rpm; 450 hp 1,650 or 1,750 lb-ft at 950; 470 hp 1,750 at 950; 500 hp 1,850 at 950; 565 and 605 hp 1,850 at 1,000; 605 hp 2,050 at 1,000; 605 hp 1,850 at 1,000 (2,100 rpm governed); 525, 565 hp 1,850 and 605 hp 2,050 lb-ft at 1,000 rpm (1,900 rpm governed)
Transmission
- Gearbox (International does not name a standard transmission)
- International T14 14-speed automated manual (S13 Integrated); Eaton Cummins Endurant HD 12-speed and XD / XD Pro 18-speed automated manual; Eaton Fuller 10, 11, 13 and 18-speed manual; Allison EVS, RDS and OFS automatic
- T14 gear ratios (T14 with two crawler gears and one overdrive gear)
- 1st 20.81, 2nd 16.16, 3rd 12.57, 4th 9.76, 5th 7.56, 6th 5.87, 7th 4.55, 8th 3.53, 9th 2.77, 10th 2.15, 11th 1.66, 12th 1.29, 13th 1.00, 14th 0.78; reverse R1 16.23, R2 12.60, R3 9.81, R4 7.61, R5 5.91, R6 4.59
- Clutch
- Hydraulic with air assist (standard)
- Power take-off
- Front engine PTO (FEPTO) and rear engine PTO (REPTO); factory-installed single and dual-drive transmission PTOs on S13 Integrated models
Weight
- Gross vehicle weight (HX520 maximum GVWR; range 52,000-73,000 lb (23,587-33,112 kg))
- 33,112 kg
- Front axle rating
- Cummins-Meritor 12,000-20,000 lb (5,443-9,072 kg)
- Rear axle rating
- Tandem: Dana single speed 40,000-52,000 lb, Cummins-Meritor 40,000-58,000 lb, double reduction 58,000 lb; tridem: Cummins-Meritor 53,000 lb
- Front suspension
- Multi-leaf 20,000 lb; parabolic taper-leaf 12,000-20,000 lb
- Rear suspension
- Chalmers 40,000-52,000 lb; Hendrickson RT 40,000-46,000 lb, R 80,000 lb, HAULMAAX EX 40,000-52,000 lb, HAS 40,000-46,000 lb, PRIMAAX EX 46,000-52,000 lb, PRIMAAX EX tridem 69,000 lb
- Air suspension axle spacing
- Hendrickson HAS 55 and 60 in; PRIMAAX EX 55, 60 and 72 in
Chassis
- Frame (120,000 psi yield, heat-treated alloy steel)
- Resisting bending moment 2,037,600-4,854,000 in-lb
- Frame rails
- Single rail 10.25 x 3.61 x 0.375 in (2,037,600 in-lb), 12.25 x 3.380 x 0.375 in (2,521,200), 12.5 x 3.750 x 0.5 in (3,536,400); double rail 10.813 x 3.893 x 0.625 in (3,580,800) and 13.030 x 3.687 x 0.6875 in (4,854,000)
- Alternator
- Delco Remy 165-325 A; Leece-Neville 160-240 A
- Batteries
- 1,980-9,200 CCA
- Exhaust
- Single or dual vertical stacks; vertical aftertreatment device with single vertical stack
- Braking and control systems
- Traction control; electronic stability control (ESC); Bendix Wingman Advanced and Wingman Fusion
- Recovery devices
- Center tow pin 150,000 lb (68,039 kg); tow hooks 80,000 lb; HD rear tow loop 80,000 lb; HD rear tow hooks 80,000 lb
- Hood
- 3-piece DCPD hood
Service capacities
- Fuel tanks (Single or dual, polished or non-polished; left-hand under cab, dual under cab or back of cab)
- 60-300 US gal (227-1,136 L), 24 or 26 in diameter
- Fuel tank (Maximum; 60-300 US gal (227-1,136 L), single or dual)
- 1,136 L
- Split fuel and hydraulic tanks
- 100 gal (50 fuel / 50 hydraulic); 120 gal (79 / 50); 120 gal (80 / 40)